Infrared spectra of aluminum hydrides in solid hydrogen: Al2H4 and Al2H6

The reaction of laser-ablated Al atoms and normal-H(2) during co-deposition at 3.5 K produces AlH, AlH(2), and AlH(3) based on infrared spectra and the results of isotopic substitution (D(2), H(2) + D(2) mixtures, HD). Four new bands are assigned to Al(2)H(4) from annealing, photochemistry, and agreement with frequencies calculated using density functional theory. Ultraviolet photolysis markedly increases the yield of AlH(3) and seven new absorptions for Al(2)H(6) in the infrared spectrum of the solid hydrogen sample. These frequencies include terminal Al-H(2) and bridge Al-H-Al stretching and AlH(2) bending modes, which are accurately predicted by quantum chemical calculations for dibridged Al(2)H(6), a molecule isostructural with diborane. Annealing these samples to remove the H(2) matrix decreases the sharp AlH(3) and Al(2)H(6) absorptions and forms broad 1720 +/- 20 and 720 +/- 20 cm(-1) bands, which are due to solid (AlH(3))(n). Complementary experiments with thermal Al atoms and para-H(2) at 2.4 K give similar spectra and most product frequencies within 2 cm(-1). Although many volatile binary boron hydride compounds are known, binary aluminum hydride chemistry is limited to the polymeric (AlH(3))( solid. Our experimental characterization of the dibridged Al(2)H(6) molecule provides an important link between the chemistries of boron and aluminum.     

Zinc and cadmium dihydroxide molecules: matrix infrared spectra and theoretical calculations

Laser-ablated zinc and cadmium atoms were mixed uniformly with H2 and O2 in excess argon or neon and with O2 in pure hydrogen or deuterium during deposition at 8 or 4 K. UV irradiation excites metal atoms to insert into O2 producing OMO molecules (M = Zn, Cd), which react further with H2 to give the metal hydroxides M(OH)2 and HMOH. The M(OH)2 molecules were identified through O-H and M-O stretching modes with appropriate HD, D2, (16,18)O2, and (18)O2 isotopic shifts. The HMOH molecules were characterized by O-H, M-H, and M-O stretching modes and an M-O-H bending mode, which were particularly strong in pure H2/D2. Analogous Zn and Cd atom reactions with H2O2 in excess argon produced the same M(OH)2 absorptions. Density functional theory and MP2 calculations reproduce the IR spectra of these molecules. The bonding of Group 12 metal dihydroxides and comparison to Group 2 dihydroxides are discussed. Although the Group 12 dihydroxide O-H stretching frequencies are lower, calculated charges show that the Group 2 dihydroxide molecules are more ionic.     

The absorption spectra of the phenoxyl radical in solid argon

Vacuum ultraviolet photolysis of phenol, phenol-d₆ and anisole during condensation with excess argon at 20 K has produced and trapped the phenoxyl radical as evidenced by structured absorptions at 397.2 and 628.1 nm. A broad photosensitive 416 ± 2 nm band is tentatively assigned to the phenol cation.     

Absorption spectra and photochemistry of the toluene cation and benzyl radical in solid argon

Toluene diluted in argon subjected to continuous argon discharge radiation during condensation at 21 K revealed absorptions at 310.5 and 449.6 nm due to benzyl radical, and 317 nm due to a C₇7H₉ radical. A photosensitive 430 nm band, in agreement with photodissociation spectra of the toluene parent cation, is assigned to this species.     

Determination of selenium(IV) by anodic stripping voltammetry with an in situ gold-plated rotating glassy carbon disk electrode

The application of an in situ gold-plated glassy carbon disk electrode to the determination of selenium(IV) by anodic stripping voltammetry is described. A single anodic stripping peak is obtained for solutions containing less than 1 × 10^-6 M Se(IV). The minimum concentration detected was 2 × 10^-9 M Se(IV). The determination of selenium in NBS SRM 1577 (Bovine Liver) by anodic stripping voltammetry with an in situ goldplated rotating glassy carbon electrode yielded a value of 1.14 ± 0.07 μg Se g^-1 compared with a certificate value of 1.1 ± 0.1 μg Se g^-1.     

Speciation of arsenic in ground water samples: A comparative study of CE-UV, HG-AAS and LC-ICP-MS

The performance of capillary electrophoresis-ultraviolet detector (CE-UV), hydride generation-atomic absorption spectrometry (HG-AAS) and liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS) have been compared for the speciation of arsenic (As) in groundwater samples. Two inorganic As species, arsenite (As^III), arsenate (As^V) and one organo species dimethyl arsenic acid (DMA) were mainly considered for this study as these are known to be predominant in water. Under optimal analytical conditions, limits of detection (LD) ranging from 0.10 (As^III, AsT) to 0.19 (DMA) μg/l for HG-AAS, 100 (As^III, DMA) to 500 (As^V) μg/l for CE-UV and 0.1 (DMA, MMA) to 0.2 (As^III, As^V) μg/l for LC-ICP-MS, allowed the determination of the above three species present in these samples. Results obtained by all the three methods are well correlated (r² = 0.996*** for total As) with the precision of <5% R.S.D. except CE-UV. The effect of interfering ions (e.g. Fe²⁺, Fe³⁺, SO₄²⁻ and Cl⁻) commonly found in ground water on separation and estimation of As species were studied and corrected for. Spike recovery was tested and found to be 80-110% at 0.5 μg/l As standard except CE-UV where only 50% of the analyte was recovered. Comparison of these results shows that LC-ICP-MS is the best choice for routine analysis of As species in ground water samples.     

Pd-catalysed cross coupling of terminal alkynes to diynes in the absence of a stoichiometric additive

An efficient, room temperature procedure for the cross-coupling of a range of terminal alkynes, using standard Sonogashira cross-coupling conditions (Pd/Cu) is presented. At higher reaction temperatures, head-to-tail or head-to-head dimerisation affords 1,3- and 1,4-disubstituted enynes, respectively as minor products.     

A cation-pi binding interaction with a tyrosine in the binding site of the GABAC receptor

GABA(C) (rho) receptors are members of the Cys-loop superfamily of neurotransmitter receptors, which includes nicotinic acetylcholine (nACh), 5-HT(3), and glycine receptors. As in other members of this family, the agonist binding site of GABA(C) receptors is rich in aromatic amino acids, but while other receptors bind agonist through a cation-pi interaction to a tryptophan, the GABA(C) binding site has tyrosine at the aligning positions. Incorporating a series of tyrosine derivatives at position 198 using unnatural amino acid mutagenesis reveals a clear correlation between the cation-pi binding ability of the side chain and EC(50) for receptor activation, thus demonstrating a cation-pi interaction between a tyrosine side chain and a neurotransmitter. Comparisons among four homologous receptors show variations in cation-pi binding energies that reflect the nature of the cationic center of the agonist.     

Synthesis of δ-Lactones from Glutaraldehyde

A novel and general synthesis of δ-lactones from glutaraldehyde is described. The dialdehyde is first reacted with an alkyl or substituted alkyl Grignard reagent to afford a δ-hydroxyaldehyde in good yield. These aldehydes exist preferentially in the cyclic hemiacetal form (δ-lactols). Oxidation of the latter compounds to give δ-lactones is readily achieved with silver oxide or bromine. The δ-lactols and δ-lactones serve as intermediates for the total synthesis of steroids.     

Synthesis,characterization, and blends of high temperature poly(arylether sulfone)s

The preparation of poly(4-oxy-1,4-phenylenesulfonyl-4,4′-biphenylene-4-sulfonylphenylene) (PBP) has been accomplished by the base mediated, polycondensation reaction between two biphenyl containing monomers. The bisphenol, 4,4′-bis[(4-hydroxyphenyl) sulfonyl]biphenyl (HSB), was reacted with 4,4′-bis[(4-chlorophenyl)sulfonyl]-biphenyl (CSB) in tetramethylene sulfone solvent. The highest mechanical properties and glass transition temperature was observed for polymer PBP with a reduced viscosity around 1.0 dL/g. Consequently, the current synthesis route provides polymer with higher properties than other historical preparative routes. Blends of PBP with a different poly(ether sulfone) were miscible based on the observance of a single glass transition temperature. The T_gs of the polymer blends exhibited an unusual positive deviation from the weighted linear averages of the components.