Infrared and DFT investigations of the XC[triple bond]ReX3 and HC[triple bond]ReX3 complexes: Jahn-Teller distortion and the methylidyne C-X(H) stretching absorptions

The XC[triple bond]ReX3 complexes (X = F, Cl) are produced by CX(4) reaction with laser-ablated Re atoms, following oxidative C-X insertion and alpha-halogen migration in favor of the carbon-metal triple bond and are identified through the observation of characteristic absorptions in the argon matrix infrared spectra and comparison with vibrational frequencies calculated by density functional theory. The methylidyne C-F and C-Cl stretching absorptions are observed near 1584 and 1328 cm-1, and the C-H stretching modes for HC[triple bond]ReX3 at 3104 and 3097 cm(-1), respectively, which are substantially higher than the precursor stretching modes and in agreement with the general trend that higher s-orbital character in carbon hybridization leads to a higher stretching frequency. The Jahn-Teller effect in the doublet-state XC[triple bond]ReX3 and HC[triple bond]ReX3 complexes gives rise to distorted structures with Cs symmetry and two equivalent longer Re-X bonds and one slightly shorter Re-X bond.     

Speciation of arsenic in ground water samples: A comparative study of CE-UV, HG-AAS and LC-ICP-MS

The performance of capillary electrophoresis-ultraviolet detector (CE-UV), hydride generation-atomic absorption spectrometry (HG-AAS) and liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS) have been compared for the speciation of arsenic (As) in groundwater samples. Two inorganic As species, arsenite (As^III), arsenate (As^V) and one organo species dimethyl arsenic acid (DMA) were mainly considered for this study as these are known to be predominant in water. Under optimal analytical conditions, limits of detection (LD) ranging from 0.10 (As^III, AsT) to 0.19 (DMA) μg/l for HG-AAS, 100 (As^III, DMA) to 500 (As^V) μg/l for CE-UV and 0.1 (DMA, MMA) to 0.2 (As^III, As^V) μg/l for LC-ICP-MS, allowed the determination of the above three species present in these samples. Results obtained by all the three methods are well correlated (r² = 0.996*** for total As) with the precision of <5% R.S.D. except CE-UV. The effect of interfering ions (e.g. Fe²⁺, Fe³⁺, SO₄²⁻ and Cl⁻) commonly found in ground water on separation and estimation of As species were studied and corrected for. Spike recovery was tested and found to be 80-110% at 0.5 μg/l As standard except CE-UV where only 50% of the analyte was recovered. Comparison of these results shows that LC-ICP-MS is the best choice for routine analysis of As species in ground water samples.     

Fluorescence-dip infrared spectroscopy and predissociation dynamics of OH A 2Sigma+ (v = 4) radicals

Fluorescence-dip infrared spectroscopy, an UV-IR double-resonance technique, is employed to characterize the line positions, linewidths, and corresponding lifetimes of highly predissociative rovibrational levels of the excited A (2)Sigma(+) electronic state of the OH radical. Various lines of the 4 <--2 overtone transition in the excited A (2)Sigma(+) state are observed, from which the rotational, centrifugal distortion, and spin-rotation constants for the A (2)Sigma(+) (v = 4) state are determined, along with the vibrational frequency for the overtone transition. Homogeneous linewidths of 0.23-0.31 cm(-1) full width at half maximum are extracted from the line profiles, demonstrating that the N = 0 to 7 rotational levels of the OH A (2)Sigma(+) (v = 4) state undergo rapid predissociation with lifetimes of < or =23 ps. The experimental linewidths are in near quantitative agreement with first-principles theoretical predictions.     

Metalloproteinase inhibitors for the disintegrin-like metalloproteinases ADAM10 and ADAM17 that differentially block constitutive and phorbol ester-inducible shedding of cell surface molecules

The transmembrane metzinkin-proteases of the ADAM (a disintegrin and a metalloproteinase)-family ADAM10 and ADAM 17 are both implicated in the ectodomain shedding of various cell surface molecules including the IL6-receptor and the transmembrane chemokines CX3CL1 and CXCL16. These molecules are constitutively released from cultured cells, a process that can be rapidly enhanced by cell stimulation with phorbol esters such as PMA. Recent research supports the view that the constitutive cleavage predominantly involves ADAM10 while the inducible one is mediated to a large extent by ADAM17. We here describe the discovery of hydroxamate compounds with different potency against ADAM10 and ADAM17 and different ability to block constitutive and inducible cleavage of IL6R, CX3CL1 and CXCL16 by the two proteases. By screening a number of hydroxamate inhibitors for the inhibition of recombinant metalloproteinases, a compound was found inhibiting ADAM10 with more than 100-fold higher potency than ADAM17, which may be explained by an improved fit of the compound to the S1' specificity pocket of ADAM10 as compared to that of ADAM17. In cell-based cleavage experiments this compound (GI254023X) potently blocked the constitutive release of IL6R, CX3CL1 and CXCL16, which was in line with the reported involvement of ADAM10 but not ADAM17 in this process. By contrast, the compound did not affect the PMA-induced shedding, which was only blocked by GW280264X, a potent inhibitor of ADAM17. As expected, GI254023X did not further decrease the residual release of CX3CL1 and CXCL16 in ADAM10-deficient cells verifying that the compound's effect on the constitutive shedding of these molecules was exclusively due to the inhibition of ADAM10. Thus, GI254023X may by of use as a preferential inhibitor of constitutive shedding events without effecting the inducible shedding in response to agonists acting similar to PMA.     

Copper and zinc removal from aqueous solution by mixed mineral systems II. The role of solution composition and aging

This study investigates Cu and Zn removal onto binary mixed mineral sorbents from simulated wastewater, relevant to streams impacted by acid mine drainage and effluents. Mixed suspensions of kaolinite/montmorillonite and kaolinite/goethite exhibited different sorption behavior from the single mineral components, reducing Cu and Zn removal (except Cu sorbed on montmorillonite/goethite) over the range of pH investigated. Cu and Zn removal by the electrolyzed systems showed a complex response to increased ionic strength, which increased solid concentration, leading to lower Cu and Zn sorption. Enhanced Cu sorption on the montmorillonite/goethite as age increased may be attributed to increased hydroxylation of the mineral surface resulting in the formation of new reactive sites.     

The C-H activation of methane by laser-ablated zirconium atoms: CH2=ZrH2, the simplest carbene hydride complex, agostic bonding, and (CH3)2ZrH2

Reaction of laser-ablated Zr with CH(4) ((13)CH(4), CD(4), and CH(2)D(2)) in excess neon during condensation at 5 K forms CH(2)=ZrH(2), the simplest alkylidene hydride complex, which is identified by infrared absorptions at 1581.0, 1546.2, 757.0, and 634.5 cm(-)(1). Density functional theory electronic structure calculations using a large basis set with polarization functions predict a C(1) symmetry structure with agostic C-H- - -Zr bonding and distance of 2.300 A. Identification of the agostic CH(2)=ZrH(2) methylidene complex is confirmed by an excellent match of calculated and observed isotopic frequencies particularly for the four unique CHD=ZrHD isotopic modifications. The analogous reactions in excess argon give two persistent photoreversible matrix configurations for CH(2)=ZrH(2). Finally, methane activation by CH(2)=ZrH(2) gives the new (CH(3))(2)ZrH(2) molecule.     

A cation-pi binding interaction with a tyrosine in the binding site of the GABAC receptor

GABA(C) (rho) receptors are members of the Cys-loop superfamily of neurotransmitter receptors, which includes nicotinic acetylcholine (nACh), 5-HT(3), and glycine receptors. As in other members of this family, the agonist binding site of GABA(C) receptors is rich in aromatic amino acids, but while other receptors bind agonist through a cation-pi interaction to a tryptophan, the GABA(C) binding site has tyrosine at the aligning positions. Incorporating a series of tyrosine derivatives at position 198 using unnatural amino acid mutagenesis reveals a clear correlation between the cation-pi binding ability of the side chain and EC(50) for receptor activation, thus demonstrating a cation-pi interaction between a tyrosine side chain and a neurotransmitter. Comparisons among four homologous receptors show variations in cation-pi binding energies that reflect the nature of the cationic center of the agonist.     

Infrared spectra of CH3-CrH, CH3-WH, CH2=WH2, and CH[triple bond]WH3 formed by activation of CH4 with Cr and W atoms

Laser-ablated W atoms react with CH4 in excess argon to form the CH3-WH, CH2=WH2, and CH[triple bond]WH3 molecules with increasing yield in this order of product stability. These molecules are identified from matrix infrared spectra by isotopic substitution. Tungsten methylidene and methylidyne hydride molecules are reversibly interconverted by alpha-H transfers upon visible and ultraviolet irradiations. Matrix infrared spectra and DFT/B3LYP calculations show that CH[triple bond]WH3 is a stable molecule with C3v symmetry, but other levels of theory were required to describe agostic distortion for CH2=WH2. Analogous reactions with Cr gave only CH3-CrH, which is calculated to be by far the most stable product.     

A simple proof of Ramanujan’s summation of the1ψ1

A simple proof by functional equations is given for Ramanujan’s₁ ψ ₁ sum. Ramanujan’s sum is a useful extension of Jacobi's triple product formula, and has recently become important in the treatment of certain orthogonal polynomials defined by basic hypergeometric series.     

Computer-aided Modelling of Decision-support Systems

Information systems have become increasingly complex over recent years, underscoring the challenge of designing systems which will provide the different functions in an organization with the information necessary for effective decision-making. With rapidly developing computer technology, it is natural that information systems evolve in a manner which is greatly dependent on computing hardware and software. Yet, there has been little development in the techniques of systems analysis and design to handle new and less well-understood functions which are of increasing interest.This paper demonstrates an application of structural modelling concepts to decision-support system synthesis. With the aid of the computer, structural modelling serves as an effective tool for: (1) partitioning a system into a set of subsystems; (2) specifying subsystems sufficiently to permit separate testing before total system tests; (3) eliminating redundant control information flow; and (4) facilitating decision-maker and system-analyst coordination and participation in the design process.