Iridium-catalyzed carbonyl group-directed oxidative coupling of arenes with alkenes

The iridium complex [Cp¹IrCl₂]₂ is a good catalyst for the directed oxidative coupling of arenes with alkenes; a wide range of carbonyl functionalities (NHCOR, CONH₂ and COR) can be employed as the directing group.     

Response of bare 1-3 piezocomposite array to localized electrical excitation

The theoretical response of a 1-3 piezocomposite plate submitted to localized electrical excitation was studied with the theory of guided waves. The theoretical modeling was based on the global matrix method, and the piezocomposite material was considered as a homogeneous medium. To validate the theoretical results, experimental displacement measurements were performed with an interferometric probe on two piezocomposite plates, one with a single element and one with an array of electrodes. The measured response on the single-element plate was mainly supported by the S0 and S3 modes of the plate. Homogenization limits of the composite in terms of frequency and wave number are defined on the basis of data from this sample. Within these limits, the piezocomposite material operates as a homogeneous medium, and comparison between theoretical and experimental results allows the equivalent electroacoustic parameters to be evaluated. A second sample was measured to study the effects of the electrode array on the electroacoustic response of the plate. Two kinds of electrical excitation were studied.     

Observation of geometric phases for mixed states using NMR interferometry

Examples of geometric phases abound in many areas of physics. They offer both fundamental insights into many physical phenomena and lead to interesting practical implementations. One of them, as indicated recently, might be an inherently fault-tolerant quantum computation. This, however, requires one to deal with geometric phases in the presence of noise and interactions between different physical subsystems. Despite the wealth of literature on the subject of geometric phases very little is known about this very important case. Here we report the first experimental study of geometric phases for mixed quantum states. We show how different they are from the well-understood, noiseless, pure-state case.     

Rhenium carbonyl complexes with monodentate-coordinated diphosphines: activation of terminal phosphino groups towards amine-oxide oxidation

Terminal phosphino groups of [Re₂(CO)₉(η¹-P-P)] (P-P = diphosphines) are activated towards oxidation by Me₃NO. The respective reactions of Me₃NO with [Re₂(CO)₉{η¹-P(o-anisyl)₂(CH₂)₃PPh₂}], [Re₂(CO)₉{η¹-PPh₂(CH₂)₃P(o-anisyl)₂}] and [Re₂(CO)₉(η¹-trans-PPh₂CHCHPPh₂)] were studied to investigate the mechanism of this oxidation. The results are consistent with an intramolecular pathway involving a cyclic intermediate, without exchange of the coordinated and terminal phosphino groups. A mechanism which involves an interaction of the terminal phosphino group with a carbonyl ligand is proposed. In sharp contrast to eq-[Re₂(CO)₉(η¹-P-P)] (P-P = Ph₂P(CH₂)_nPPh₂, n = 1-6), eq-[Re₂(CO)₉(η¹-trans-PPh₂CHCHPPh₂)] appears to be indefinitely stable towards equatorial → axial isomerization at room temperature, thus, allowing its crystal structure to be determined.     

Ultrasonically controlled polymeric drug delivery

The area of polymeric controlled drug delivery systems has been a field of increasing interest. However, relatively little attention has been given to developing systems in which the rate of delivery can be manipulated externally. We now report that release rates of biologically active substances from a polymeric matrix can be repeatedly modulated from a position external to the environment of use by ultrasonic energy. The ultrasound affects the degradation rate of bioerodible polymers as well as permeation through non-erodible polymers. The system has been shown to be responsive in vivo. Skin histopathology of the ultrasound treated area didn't reveal any differences between the treated skin and the untreated controls.     

Applying Tikhonov regularization to process pendant droplet tensiometry data

The problem of obtaining the first and second derivatives of the profile of a pendant droplet is formulated as an integral equation of the first kind. This equation is solved by Tikhonov regularization in which the method of general cross validation is used to guide the selection of the regularization parameter. These derivatives are converted into mean curvature as a function of droplet height. Surface tension is then obtained by regression computation between the mean curvature and two possible algebraic expressions suggested by the Laplace-Young equation. This way of obtaining surface tension is demonstrated by applying it to a number of published droplet profiles. Some of the problems encountered are discussed and solutions suggested.     

Colloidal adhesion of phospholipid vesicles: high-resolution reflection interference contrast microscopy and theory

High-resolution reflection interference contrast microscopy (HR-RICM) was developed for probing the deformation and adhesion of phospholipid vesicles induced by colloidal forces on solid surfaces. The new technique raised the upper limit of the measured membrane–substrate separation from 1 to 4.5 μm and improved the spatial resolution of the heterogeneous contact zones. It was applied to elucidate the effects of wall thickness, pH and osmotic stress on the non-specific adhesion of giant unilamellar vesicles (ULV) and multilamellar vesicles (MLV) on fused silica substrates. By simultaneous cross-polarization light microscopy and HR-RICM measurements, it was observed that ULV with the wall thickness of a single bilayer would be significantly deformed in its equilibrium state on the substrate as the dimension of its adhesive–cohesive zone was 29% higher than the theoretical value of a rigid sphere with the same diameter. Besides, electrostatic interaction was shown as a significant driving force for vesicle adhesions since the reduction in pH significantly increased the degree of deformation of adhering ULV and heterogeneity of the adhesion discs. The degree of MLV deformation on the solid surfaces was significantly less than that of ULV. When the wall thickness of vesicle increased, the dimension of contact zone was reduced dramatically due to the increase of membrane bending modulus. Most important, the adhesion strength of colloidal adhesion approached that of specific adhesion. Finally, the increase of osmotic stress led to the collapse of adhering vesicles on the non-deformable substrate and raised the area of adhesive contact zone. To interpret these results better, the equilibrium deformation of adhering vesicle was modeled as a truncated sphere and the adhesion energy was calculated with a new theory.     

Biodegradable elastomer for soft tissue engineering

In this work we present the synthesis of a biodegradable, elastomeric material with a wide range of mechanical properties. The synthesis of the material was done by condensation polymerization of malic acid and 1,12–dodecandiol. The synthesized materials have low Young’s modulus ranging from about 1 to 4 MPa and a high elongation at break of 25–737% depending on the crosslinking density of the system. The cell growth observed under microscope showed good proliferation at 3 days of culture indicating good biocompatibility and support of L929 cells growth. The fabrication of 3D scaffold from these materials using the super critical CO₂ foaming method was also attempted. This method of scaffold fabrication is appropriate for materials that are easily hydrolysable and it also has the advantage of being a solvent free process. These materials are generally soft, biocompatible and biodegradable making them suitable for tissue engineering of soft tissues that are elastic in nature like muscles and blood vessels.