Formation of ZnO,MgO and NiO Nanoparticles from Aqueous Droplets in Flame Reactor

Nanoparticles of ZnO, MgO and NiO were produced from droplets of aqueous salt solution in the flame spray pyrolysis reactor. Conventional spray pyrolysis, in which electrical furnace reactor is used, is reported to produce nanoparticles only from acetate precursor. If the reactor pressure is low (60torr), nitrate salt precursor is also known to produce nanoparticles. In this paper, we report that nanoparticles are produced from nitrate as well as acetate salt precursor solution when propane–oxygen diffusion flame is used to decompose aqueous aerosol droplets. At low flame temperature, however, nanoparticles are not formed and the particle morphology is similar to the morphology produced by the conventional spray pyrolysis. At high flame temperature, nanoparticles are formed, regardless of the salt type. Nanoparticles are formed at lower flame temperature from acetate salts than from nitrate salts. All nanoparticle prepared in this work were fully crystallized and the size measured from transmission electron microscopy images was 30nm. This size agreed well with the particle size calculated from X-ray diffraction and specific surface area data.     

An unusual rearrangement of photolysis of the enol acetate of 4-thiochromanone

The enol acetate from 4-thiochromanoneon photolysis undergoes ring opening, apparently involving a novel (1,5)-acyl migration from oxygen to sulfur, to give 1-(2-acetylthiophenyl)propen-1-one.     

Photodimerizatiom of thiochromone in aromatic solvents

Photolysis of thiochromone $\text{1a}$ in several aromatic solvents of widely differing ionization potentials leads to the formation of mixtures of all four possible cyclobutane photodimers. In sharp contrast to the photochemical behavior of the analogous sulfone, no evidence for {2+2}, or for substitutive, photoaddition reactions was found.     

Kinetic study of the polymerization of acrylamide in inverse microemulsion

The polymerization of acrylamide in inverse microemulsions stabilized by Aerosol OT emulsifier and initiated with azobisisobutyronitrile (AIBN) or potassium persulfate (K₂S₂O₈) has been investigated. The inverse polyacrylamide latexes formed are clear and highly stable. A dilatometric technique was used to follow the conversion of monomer at T = 45°C. The rate of polymerization is first order with respect to initial monomer concentration in the presence of AIBN, and is 1.5 order with K₂S₂O₈. An inverse relationship between molecular weight and emulsifier concentration is found which suggests participation of the emulsifier in the initiation reaction. This is confirmed by the independence of the molecular weight of polyacrylamide on the concentration of the initiators. High values of the rate of polymerization are obtained combined with high molecular weights (up to 10⁷). An important and novel feature of this microemulsion process is that each final latex particle consists of one single molecule of polyacrylamide in a collapsed state. This suggests kinetics which do not follow the Smith and Ewart theory but are characterized by continuous particle nucleation.     

Heterocyclic thionates as a new class of bridging ligands in oxo-centered triangular cyclopentadienylchromium(III) complexes

The interactions of the benzothiazolate complex, CpCr(CO)(2)(SCSN(C(6)H(4))) (2), and the tetrazole thiolate complex, CpCr(CO)(3)(eta(1)-SCN(4)Ph) (3), with controlled amounts of Me(3)OBF(4) and (MeO)(2)SO(2), respectively, produced the corresponding mu(3)-oxo trinuclear thionate-bridged complexes, [Cp(3)Cr(3)(mu(2)-OH)(mu(3)-O)(mu(2)-eta(2)-SCSN(C(6)H(4)))(2)](5)BF(4) (45%) and [Cp(3)Cr(3)(mu(2)-OH)(mu(3)-O)(mu(2)-eta(2)-SCN(4)Ph)(2)](9)(MeOSO(3)) (53%), together with their respective free dimethylated thiolate ligands, [MeSCSNMe(C(6)H(4))](4)BF(4) and (Me(2)SCN(4)Ph)(8)MeOSO(3). The reaction of 3 with Me(3)OBF(4) resulted in the isolation of a binuclear complex, [Cp(2)Cr(2)(mu-OH)(mu-eta(2)-SCN(4)Ph)(2)](7)BF(4) (43%), and (8)BF(4) (27%). The reaction of the thiopyridine complex, CpCr(CO)(2)(SPy) (4), with I(2) also produced a similar mu(3)-oxo complex 10 (31%), together with CpCrI(2)(THF) (11) and the disulfide (SPy)(2). Similar reactions with 2 and 3 and I(2) yielded species 5 and 7, together with 11 and disulfides derived from their respective ligands. Cyclic voltammograms recorded in solutions of 5 and 9 indicated that the compounds could be reduced and oxidized at very similar potentials. An EPR spectrum characteristic of a compound with axial symmetry was obtained for 9 at 7 K. Single-crystal X-ray diffraction analyses confirmed that species 7 is dinuclear, whereas 5 and 9 are structural trinuclear analogues, each containing a mu(3)-oxo central core.     

Partial molar volumes of (acetonitrile + water) mixtures over the temperature range (273.15 to 318.15) K

Isothermal molar volume data of (acetonitrile + water) mixtures, between T = 273.15 K and T = 318.15 K, extracted from different sources are combined and treated as a single set to even out minor differences between sources and to increase the number of data points for each temperature. Tikhonov regularization is applied to compute the isothermal first and second derivatives of these data with respect to molar composition. For the reference temperature of 298.15 K, this computation is extended to the third derivative. Generalized Cross Validation is used to guide the selection of the regularization parameter that keeps noise amplification under control. The resulting first derivatives are used to construct the partial molar volume curves which are then checked against published results. Properties of the partial molar volumes are analysed by examining their derivatives. Finally the general shape of the second derivative curve of molar volume is explained qualitatively in terms of tripartite segmentation of the molar composition interval but quantitative comparisons are required to confirm this explanation.     

A new normalization method for determination of colloidal fouling potential in membrane processes

Normalization of permeate flux data is widely used to characterize membrane fouling under different experimental conditions. The main intention of normalization is to allow a fair comparison of feed water fouling potentials by eliminating the effects of different operational parameters used in the experiments, such as net driving pressure and clean-membrane resistance. However, it was demonstrated that the commonly used intuitive normalization methods usually could not serve their intended purpose. In this study, a new normalization method was proposed for characterizing water-fouling potential based on fundamental principles of membrane fouling. The intention of this normalization method was to define a fouling potential for feed water that was independent of, or at least, not strongly affected by operational conditions. Laboratory-scale ultrafiltration fouling tests were conducted under different colloid sizes, concentrations, and driving pressures. The experiments showed that the fouling potentials defined by the newly proposed normalization method were linearly related to the colloid concentration of the feed water and that the effect of operational conditions used in the fouling experiments on the fouling potential was minimal.     

Application of the Barton photochemical reaction in the synthesis of 1-dethia-3-aza-1-carba-2-oxacephem: a novel agent against resistant pathogenic microorganisms

Racemic 7-(phenylacetamido)-1-dethia-3-aza-1-carba-2-oxacephem 3 was synthesized and found to possess antibacterial activity against Staphylococcus aureus FDA 209P, Escherichia coli ATCC 39188, Pseudomonas aeruginosa 1101-75 and Klebsiella pneumoniae NCTC 418 as well as the beta-lactamase producing organisms E. coli A9675 and P. aeruginosa 18S-H and the methicillin-resistant organism S. aureus 95. Formation of the carbacephem 3 originated from the Barton photochemical reaction in the conversion of 8 to 10. Intramolecular cyclization of syn-oximino beta-lactam 10 afforded 7-azido-2-oxa-3-azacephem 11, which was reduced and acylated to 12. Enzymatic removal of the methyl group from 12 gave the target molecule 3.