The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

Determination of oxytetracycline, tetracycline, and chlortetracycline in milk by liquid chromatography with postcolumn derivatization and fluorescence detection

A multiresidue method for isolation and liquid chromatographic determination of oxytetracycline (OTC), tetracycline (TC), and chlortetracycline (CTC) in milk is presented. The sensitivity of the method is adequate to meet the needs of regulatory agencies. The European Community established 100 micrograms/kg as the maximum residue limit (MRL) in milk for TC, CTC, and OTC. Recoveries exceeded 80% for all tetracyclines at all levels, with good precision. Correlation coefficients of standards curves for individual tetracyclines isolated from fortified samples ranged from 0.991 for CTC to 0.998 for OTC. Other antibiotics that might interfere with analysis did not interfere with elution times of OTC, TC, and CTC. The procedure is rapid, precise, and quantitative and requires minimal preparation and minimal use of organic solvents. It can be applied to routine surveillance programs. We can prepare 10 samples for analysis in about 1.45 h.     

Performance of nonrelativistic and quasi-relativistic hybrid DFT for the prediction of electric and magnetic hyperfine parameters in 57Fe Mössbauer spectra

57Fe electric and magnetic hyperfine parameters were calculated for a series of 10 iron model complexes, covering a wide range of oxidation and spin states. Employing the B3LYP hybrid method, results from nonrelativistic density functional theory (DFT) and quasi-relativistic DFT within the zero-order regular approximation (ZORA) were compared. Electron densities at the iron nuclei were calculated and correlated with experimental isomer shifts. It was shown that the fit parameters do not depend on a specific training set of iron complexes and are, therefore, more universal than might be expected. The nonrelativistic and quasi-relativistic electron densities gave fit parameters of similar quality; the ZORA densities are only shifted by a factor of 1.32, upward in the direction of the four-component Dirac-Fock value. From a correlation of calculated electric field gradients and experimental quadrupole splittings, the value of the 57Fe nuclear quadrupole moment was redetermined to a value of 0.16 barn, in good agreement with other studies. The ZORA approach gave no additional improvement of the calculated quadrupole splittings in comparison to the nonrelativistic approach. The comparison of the calculated and measured 57Fe isotropic hyperfine coupling constants (hfcc's) revealed that both the ZORA approach and the inclusion of spin-orbit contributions lead to better agreement between theory and experiment in comparison to the nonrelativistic results. For all iron complexes with small spin-orbit contributions (high-spin ferric and ferryl systems), a distinct underestimation of the isotropic hfcc's was found. Scaling factors of 1.81 (nonrelativistic DFT) and 1.69 (ZORA) are suggested. The calculated 57Fe isotropic hfcc's of the remaining model systems (low-spin ferric and high-spin ferrous systems) contain 10-50% second-order contributions and were found to be in reasonable agreement with the experimental results. This is assumed to be the consequence of error cancellation because g-tensor calculations for these systems are of poor quality with the existing DFT approaches. Excellent agreement between theory and experiment was found for the 57Fe anisotropic hfcc's. Finally, all of the obtained fit parameters were used for an application study of the [Fe(H2O)6]3+ ion. The calculated spectroscopic data are in good agreement with the Mossbauer and electron paramagnetic resonance results discussed in detail in a forthcoming paper.     

Selective palladium-catalyzed cocyclotrimerization of arynes with dimethyl acetylenedicarboxylate: A versatile method for the synthesis of polycyclic aromatic hydrocarbons

Benzyne (1a) and the substituted derivatives 4,5-difluorobenzyne (1b) and 3-methoxybenzyne (2) undergo chemoselective palladium-catalyzed [2 + 2 + 2]-cocyclotrimerization with dimethyl acetylenedicarboxylate (DMAD) to afford the corresponding phenanthrenes and/or naphthalenes. The major products are phenanthrenes if Pd(PPh(3))(4) is used as the catalyst, naphthalenes if Pd(2)(dba)(3) is used. When the method is applied to polycyclic arynes 3-6, which are generated from the corresponding o-trimethylsilylaryl triflates, the same reactivity pattern is observed: the reaction can be selectively directed either toward the cocyclization of one molecule of aryne and two molecules of alkyne or to the reaction of two molecules of aryne with one molecule of alkyne, by appropriate choice of the palladium catalyst. The synthesis of polycyclic aromatic compounds 33-39 using this methodology is reported.     

Anodic behaviour of mono- and bisdithiafulvenyl-9,9′-spirobifluorene: insertion of vinylogous TTF into the spirobifluorenyle framework

New three-dimensional copolymers containing 9,9′-spirobifluorenyl-ethylene units were prepared by anodic oxidation of 9,9′-spirobifluorenes 2-mono- or 2,7′-disubstituted by a dithiafulvenyl unit. The synthesis, physicochemical properties and electrochemistry of both monomers and derived oligomers and polymers are reported.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Approximation in Hardy spaces

Summary We prove direct and converse theorems of approximation for distributions in the Hardy spaces H^p, 0相似文献   

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.