Magnetic properties of oxygenated carbon nitride films from RF-discharge in an acetylene, nitrogen, and oxygen mixture environments

Properties of oxygenated carbon nitride films have attracted the attention of physics researchers due to their magnetic and physical properties, as well as for their usefulness in the industry. The free radicals were investigated using electron paramagnetic resonance applied in the study of spin concentration due to the different mechanism of preparation of carbon nitride films by RF-discharge with different kinds of plasma. Unpaired spin concentrations, in the order of 10²⁰ per cm³, were measured and their time recombination dependency was important in those films. The films were grown by plasma enhanced chemical vapor deposition using mixtures of hydrocarbons, N₂ and O₂ in different proportions.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

谐振子薛定谔方程的简单解法

物质的许多物理与化学性质都可以用线性谐振子模型解释，本文用简单的数学运算求解线性谐振子的薛定谔方程，避免了特殊函数等复杂的数学运算，得出了量子力学教材完全相同的结果。     

Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.     

Kinetics of oxygen exchange in strontium titanate

The kinetics of oxygen exchange are of primary importance for the application of titanates as fast resistive oxygen sensors. The sensor’s conductivity is correlated with the oxygen partial pressure pO₂ of the surrounding atmosphere: Due to oxygen surface transfer and subsequent diffusion of oxygen vacancies V _O ^·· , a pO₂ change gives rise to a conductivity change of the sample. While bulk diffusion usually occurs very fast, the surface transfer reaction becomes the rate determining step for thin samples and for low temperatures. We have shown that in the case of acceptor doped SrTiO₃ the kinetics of the surface transfer reaction can be strongly influenced through stoichiometric changes brought about by thin coatings of alkaline earth metal oxides (e.g. SrO). In contrast to the commonly used jump method (conductivity response to a sudden pO₂ change in the time domain), a model is presented which is based on the frequency-domain analysis of amplitude and phase shift of the response signal obtained from a pO₂ modulation in a fast kinetic measurement set-up. This method allows not only for measuring response times in the sub-millisecond range but also for distinguishing between behaviour either controlled by volume diffusion or by surface transfer reaction. Paper presented at the 9th EuroConference on Ionics, Ixia, Rhodes, Greece, Sept. 15 – 21, 2002.     

Repetition rate multipliers for efficient implementation of multiphoton and pump-probe fluorescence microscopy

With the advances in pulsed laser systems, microscopic imaging techniques such as multiphoton and pump-probe fluorescence microscopy have developed into effective tools for investigating intensity and time-resolved phenomena inside biological systems. However, pulsed lasers used in these techniques usually are commercial systems with repetition frequencies of around 80 MHz. While these systems have proven to be adequate for multiphoton and pump-probe microscopic imaging applications, the temporal separation of the laser pulse train (around 12.5 ns) is long compared to the fluorescence lifetimes of many common fluorescence species. In this work, we present the designs of repetition rate multipliers based on passive optical components that can be used to increase the efficiency in multiphoton and pump-probe fluorescence microscopy. Depending on the lifetime of fluorescence molecules under investigation, the passive repetition rate multiplier can increase the duty cycle of multiphoton or pump-probe microscopy up to fourfold.     

Mild and efficient synthesis of propargylamines by copper-catalyzed Mannich reaction

Terminal alkynes undergo mild and efficient aminomethylation with aqueous formaldehyde and secondary amines under CuI catalysis. In most cases high to nearly quantitative yields of tertiary propargylamines are obtained in DMSO solution at room temperature. Aromatic, aliphatic and silylated acetylenes as well as alkynols can be used. Primary amines are less reactive and satisfactory yields of secondary propargylamines are obtained only with phenylacetylene.