Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported copper and manganese phthalocyanines in alkaline media

Manganese phthalocyanine (MnPc) and copper phthalocyanine (CuPc)-modified electrodes were prepared using multi-walled carbon nanotubes (MWCNTs) as a support material. The catalyst materials were heat treated at four different temperatures to investigate the effect of pyrolysis on the oxygen reduction reaction (ORR) activity of these electrocatalysts. The MWCNT to metal phthalocyanine ratio was varied. Scanning electron microscopy (SEM) was employed to visualise the surface morphology of the electrodes and the x-ray photoelectron spectroscopic (XPS) study was carried out to analyse the surface composition of the most active catalyst materials. The ORR was studied in 0.1 M KOH solution employing the rotating disk electrode (RDE) method. Glassy carbon (GC) electrodes were modified with carbon nanotube-supported metal phthalocyanine catalysts using Tokuyama AS-4 ionomer. The RDE results revealed that the highest electrocatalytic activity for ORR was achieved upon heat treatment at 800 °C. CuPc-derived catalyst demonstrated lower catalytic activity as compared to the MnPc-derived counterpart, which is in good agreement with previous literature, whereas the activity of MnPc-based catalyst was higher than that reported earlier.     

Grignard condensation routes to 1,3‐disilacyclobutane‐containing cyclolinear polycarbosilanes

Alkylene‐ and arylene‐bridged cyclolinear polycarbosilanes (CLPCS) with 1,3‐disilacyclobutane (DSCB) rings incorporated in the main chain of the polymer were prepared by polycondensation between corresponding di‐functional DSCB derivatives and di‐Grignard reagents. Well‐defined, low molecular weight (M_n = 3–5K; DP = 17–26), hexylene‐ and phenylene‐bridged CLPCS polymers were obtained without appreciable ring opening of the DSCB rings. Large exothermic peaks were observed in the DSC for these CLPCSs, which indicated, along with the IR spectra, that crosslinking occurred on heating to about 250 °C via the ring opening of the embedded, alternating, DSCB rings. Moreover, PB‐CLPCS undergoes photochemically induced crosslinking on UV irradiation to form crosslinked polycarbosilane network films. The spin‐cast, cured, films of these CLPCSs exhibit relatively low dielectric constants and promising thermal and mechanical properties for applications in electronics, for example, directly UV‐photoimprinted low‐k dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1547–1557     

Cover Feature: How Many O-Donor Groups in Enterobactin Does It Take to Bind a Metal Cation? (Chem. Eur. J. 28/2019)

The E. coli siderophore enterobactin, the strongest Fe^III chelator known to date, forms hexacoordinate complexes with Si^IV, Ge^IV, and Ti^IV. Synthetic protocols have been developed to prepare non-symmetric enterobactin analogues with varying denticities. Various benzoic acid residues were coupled to the macrocyclic lactone to afford a diverse library of ligands. These enterobactin analogues were bound to Si^IV, Ge^IV, and Ti^IV, and the complexes were investigated through experimental and computational techniques. The binding behavior of the synthesized chelators enabled assessment of the contribution of each of the phenolic hydroxy groups in enterobactin to metal-ion complexation. It was found that at least four O-donors are needed for enterobactin derivatives to act as metal binders. Density functional theory calculations indicate that the strong binding behavior of enterobactin can be ascribed to a diminished translational entropy penalty, a common feature of the chelate effect, coupled with the structural arrangement of the three catechol moieties, which allows the triseryl base to be installed without distorting the preferred local metal-binding geometry of the catecholate ligands.     

Amphiphilic dendritic copolymers of tert‐butyl‐glycidylether and glycidol as a nanocontainer for an anticancer ruthenium complex

Dendritic copolymers comprising a hydrophobic core and hydrophilic shell with nearly equal numbers of hydroxyl groups in the shell and different densities in the core were prepared by a multi‐step process based on anionic ring‐opening polymerization. The diversity in the core density was obtained by using copolymer stars with poly(tert‐butyl‐glycidylether)‐block‐polyglycidol arms with nearly equal length of hydrophobic blocks and numbers of hydroxyl groups of polyglycidol but different numbers of arms as macroinitiators. The ability of the dendritic copolymers to serve as a nanocontainer for a ruthenium complex Ru(NH₃)₃Cl₃ with anticancer properties was studied. The possibility of improving the water solubility of this poorly soluble drug by loading it onto dendritic copolymers was investigated. The hydroxyl groups of the dendritic copolymers were used for complexation of the ruthenium compound to the shell. The loading efficiency was analyzed by UV–vis spectroscopy. The dendritic nanoparticles in their hydrated state were visualized using cryo‐TEM. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3488–3497     

Diastereotopic splitting in the 13C NMR spectra of sulfur homofullerenes and methanofullerenes with chiral fragments

Using gauge‐invariant atomic orbital PBE/3ζ quantum chemistry approach, ¹³C NMR chemical shifts and diastereotopic splittings of sp² fullerenyl carbons of a number of sulfur homofullerenes and methanofullerenes have been predicted and discussed. An anisochrony of fullerene carbons is caused by a chiral center of attached moieties. Clearly distinguishable diastereotopic pairs (from 8 to 11) of fullerenyl carbons of homofullerenes were observed. Unambiguous assignments of ¹³C NMR chemical shifts were performed, and diastereotopic splittings of methanofullerenes were observed for α, β and γ to a functionalization site. Copyright © 2013 John Wiley & Sons, Ltd.     

Cyclic (ALN)n Compounds as Precursors to Aluminum Nitride: Synthesis and Structure of [(CH3)2AlNH2]3 and the Planar Species [(t-C4H9)2AlNH2]3

Abstract

The crystal and molecular structures of the title compounds, [(CH₃)₂AlNH₂]₃ 1 and [(t-C₄H₉)₂AlNH₂]₃ 2, have been determined in connection with their investigation as possible precursors to aluminum nitride. Both compounds have an (AlN)₃ ring-structure with distorted tetrahedral geometries for the ring Al and N atoms. The distortion from tetrahedral geometry is most pronounced for the N atoms where the endocyclic Al-N-Al bond angles average 125.3 for 1 and 134.2 for 2. The (AlN)₃ ring in 1 is in a skew-boat conformation with no unusual intra- or intermolecular contacts. Compound 2 on the other hand exhibits an unprecedented planar (AlN)₃ ring as required by a crystallographic three-fold symmetry axis. The effects of the Al and N substituents on the (AlN)₃ ring size and conformation, as well as on the endocyclic Al-N-Al bond angles, are discussed in the context of the structural results obtained for these and other (AlN)_n ring compounds.     

The Formation of Luminescent Supramolecular Ternary Complexes in Water: Delayed Luminescence Sensing of Aromatic Carboxylates Using Coordinated Unsaturated Cationic Heptadentate Lanthanide Ion Complexes

The synthesis of four lanthanide ion complexes Eu?1, Eu?2, Tb?1 and Tb?2, from the heptadentate tri-arm cyclen (1,4,7,10-tetraazacyclododecane) ligands 1 and 2 that were made in one-pot syntheses is described. These coordinatively unsaturated complexes have two labile metal-bound water molecules, as demonstrated by X-ray crystallography. This was also confirmed by evaluating their hydration state (q～2) by measuring their lifetimes in D²O and H²O, respectively. The above complexes were all designed as being “photophysically silent” prior to the recognition of the anion, since they do not possess antenna that can participate in sensitisation of the Eu(III) or the Tb(III) excited state. However, the two water molecules can be displaced upon anion binding by the appropriate aromatic carboxylates to give ternary complexes in water, through either four- or six-member ring chelates (q～0), or possibly via a monodentate binding. In the case of Tb?1 and Tb?2, large luminescence enhancements were observed upon the formation of such ternary complexes with N,N-dimethylaminobenzoic acid at ambient pH. Such binding and luminescent enhancements were also observed for Tb?1 in the presence of salicylic acid. On all occasions, the anion recognition “switched” the emission “on” over two logarithmic units. At higher concentrations, the emission is reduced possibly due to quenching. In the case of aspirin, the binding was too weak to be measured, indicating that Tb?1 selectively detects salicylic acid, the active form of aspirin in water. In the case of Eu?1 and Eu?2, the affinity of these complexes towards such aromatic carboxylates was too weak for efficient ternary complex formation.     

Assessment of mobility of heavy metals in two soil types by use of column leaching experiments and chemometric evaluation of elution curves

The objectives of this study were to evaluate the mobility of heavy metals (HMs) in two types of soils (acidic forest soil and neutral agricultural soil) by leaching with calcium chloride solution in column experiments. The screening properties of neutral agricultural soil towards pollution by heavy metals (Ni, Cu, Zn and Cd) are approximately 10 times higher than those of acid forest soil. The neutral agricultural soil, polluted artificially by one pore volume (PV) of an HMs solution of concentration 200 mg L^?1, can screen the leaching of these metals over several hundreds of years. The higher apparent desorption rate and per cent desorption of HMs (especially Cd) in acid forest soil indicated a higher potential of intensive migration of the metals across the profile and indicated potential risk of Cd pollution for this type of soil. The latest approach of artificial neural networks to describe transport of HMs in soil has been also evaluated. Using a simple three-layer perceptron topology with three hidden neurons, the experimental data could be simulated. The results suggested that the pH of soil is a major factor controlling the retention of the heavy metals in the soils.