Mass spectrometric methods prove the use of beeswax and ruminant fat in late Roman cooking pots

Lipid extracts of sherds of archaeological late Roman cooking pots were analysed using high temperature-gas chromatography coupled to a mass spectrometer and liquid chromatography with atmospheric pressure chemical ionization mass spectrometer detection (LC-APCI-MS). With these advanced techniques the use of beeswax was shown through identification of the constituting alkanes, mono and diesters. The detection of high amounts of saturated triacylglycerols (TAGs) further indicated that animal fat was processed in these pots. Part of the animal fat was characterised as originating from ruminants due to the presence of trans-fatty acids. The distribution of saturated TAGs and the higher concentration of stearic acid compared to palmitic acid in the transesterified lipid extract indicated that this was sheep fat. The results illustrate how complex mixtures can be unravelled and original contents of ancient ceramic vessels can be determined using specialised analytical equipment.     

Kinetic and spectroscopic study of 1O2 generation from H2O2 catalyzed by LDH-MoO4(2-) (LDH=layered double hydroxide)

Layered double hydroxides (LDHs), exchanged with molybdate, decompose H2O2 to form one molecule of singlet-state dioxygen (1O2) from two molecules of H2O2. The dependence of the kinetics of H2O2 decomposition on Mo and H2O2 concentrations and on temperature has been related to structural characteristics of the material (X-ray diffraction (XRD), scanning electron microscopy (SEM), IR spectroscopy, N2 adsorption, thermogravimetry) and to molybdate speciation as revealed by in-situ studies in the presence of peroxide (FT Raman, diffuse reflectance UV/visible spectroscopy). The H2O2 decomposition rate is linearly correlated with the amount of LDH-exchanged molybdate, except when a considerable fraction of the molybdate occupies less accessible interlayer positions. A maximum in the H2O2 decomposition rate as the H2O2 concentration is increased is due to the successive formation of mono-, di-, tri-, and tetraperoxomolybdates. This behavior was modeled successfully by using the equilibrium constants for formation of the Mo-peroxo complexes, and the rate constants for decay of the peroxomolybdates with 1O2 liberation. Time-resolved diffuse reflectance and Raman observations of the various MoO4(2-)-peroxide adducts are in line with the proposed kinetic scheme. Of all the Mo-peroxo species on the LDH, the triperoxomolybdate has the highest rate for decay to 1O2. Comparison with the kinetics of dissolved molybdate shows that the monomolecular decay of all peroxomolybdate species proceeds much faster at the LDH surface than in solution. Consequently, maximal rates per Mo atom are at least twice as high for the heterogeneous LDH catalyst as for the homogeneous systems.     

Tetrasulphur Tetranitride: Phase Transition and Crystal Structure at Elevated Temperature

Rietveld X‐ray crystal structure investigations on S₄N₄ give evidence for a new orthorhombic high‐temperature phase (Pbcn, a = 883.9(1) pm, b = 875.5(1) pm, c = 725.81(9) pm) very close to the explosion temperature of the solid‐state material. The phase transition can be described using Landau's theory, yielding a critical temperature of 397 K and a critical exponent of 0.50.     

FTIR analysis of the hydrolysis rate in the sol–gel formation of gadolinia-doped ceria with acetylacetonate precursors

This study reveals that Fourier transform infrared is an effective analytical tool in probing the extent of hydrolysis of cerium and gadolinium acetylacetonates dissolved in methanol. It is found that these acetylacetonates have relatively fast hydrolysis rates at the early stage of hydrolysis (<6 h). However, their hydrolysis rates become very slow beyond 6-h of hydrolysis and decrease to near zero after 55-h of hydrolysis. As a result, hydrolysis cannot be completed even after 170 h at room temperature. These phenomena suggest that the first and second acetylacetone ligands chelated to Ce³⁺ and Gd³⁺ ions can actually be hydrolyzed with relative ease at room temperature, similar to alkoxide ligands. It is the last acetylacetone ligand that is very difficult to be hydrolyzed.     

The nature of marbled Terra Sigillata slips: a combined μXRF and μXRD investigation

In addition to the red terra sigillata production, the largest Gallic workshop (La Graufesenque) made a special type of terra sigillata, called “marbled” by the archaeologists. Produced exclusively at this site, this pottery is characterized by a surface finish made of a mixture of yellow and red slips. Because the two slips are intimately mixed, it is difficult to obtain the precise composition of one of the two constituents without contamination from the other. In order to obtain very precise correlation at the appropriate scale between the color aspect and the elemental and mineralogical phase distributions in the slip, combined electron microprobe, X-ray micro spectroscopies and micro diffraction on cross-sectional samples were performed. The aim of this study is to discover how potters were able to produce this unique type of terra sigillata and especially this particular slip of an intense yellow color. Results show that the yellow component of marbled sigillata was made from a titanium-rich clay preparation. The color is due to the formation of a pseudobrookite (TiFe₂O₅) phase in the yellow part of the slip, the main characteristics of that structure being considered nowadays as essential for the fabrication of stable yellow ceramic pigments. Its physical properties such as high refractive indices and a melting point higher than that of most silicates widely used as ceramic colorants are indeed determinant for this kind of application. Finally, the red parts have a similar composition (elementary and mineralogical) to the one of standard red slip.     

Quantitative Determination and Environmental Risk Assessment of 102 Chemicals of Emerging Concern in Wastewater-Impacted Rivers Using Rapid Direct-Injection Liquid Chromatography—Tandem Mass Spectrometry

The rapid source identification and environmental risk assessment (ERA) of hundreds of chemicals of emerging concern (CECs) in river water represent a significant analytical challenge. Herein, a potential solution involving a rapid direct-injection liquid chromatography–tandem mass spectrometry method for the quantitative determination of 102 CECs (151 qualitatively) in river water is presented and applied across six rivers in Germany and Switzerland at high spatial resolution. The method required an injection volume of only 10 µL of filtered sample, with a runtime of 5.5 min including re-equilibration with >10 datapoints per peak per transition (mostly 2 per compound), and 36 stable isotope-labelled standards. Performance was excellent from the low ng/L to µg/L concentration level, with 260 injections possible in any 24 h period. The method was applied in three separate campaigns focusing on the ERA of rivers impacted by wastewater effluent discharges (1 urban area in the Basel city region with 4 rivers, as well as 1 semi-rural and 1 rural area, each focusing on 1 river). Between 25 and 40 compounds were quantified directly in each campaign, and in all cases small tributary rivers showed higher CEC concentrations (e.g., up to ~4000 ng/L in total in the R. Schwarzach, Bavaria, Germany). The source of selected CECs could also be identified and differentiated from other sources at pre- and post- wastewater treatment plant effluent discharge points, as well as the effect of dilution downstream, which occurred over very short distances in all cases. Lastly, ERA for 41 CECs was performed at specific impacted sites, with risk quotients (RQs) at 1 or more sites estimated as high risk (RQ > 10) for 1 pharmaceutical (diclofenac), medium risk (RQ of 1–10) for 3 CECs (carbamazepine, venlafaxine, and sulfamethoxazole), and low risk (RQ = 0.1–1.0) for 7 CECs (i.e., RQ > 0.1 for 11 CECs in total). The application of high-throughput methods like this could enable a better understanding of the risks of CECs, especially in low flow/volume tributary rivers at scale and with high resolution.     

Targeted analysis of glycomics liquid chromatography/mass spectrometry data

Hydrophilic interaction chromatography (HILIC) liquid chromatography/mass spectrometry (LC/MS) is appropriate for all native and reductively aminated glycan classes. HILIC carries the advantage that retention times vary predictably according to oligosaccharide composition. Chromatographic conditions are compatible with sensitive and reproducible glycomics analysis of large numbers of samples. The data are extremely useful for quantitative profiling of glycans expressed in biological tissues. With these analytical developments, the rate-limiting factor for widespread use of HILIC LC/MS in glycomics is the analysis of the data. In order to eliminate this problem, a Java-based open source software tool, Manatee, was developed for targeted analysis of HILIC LC/MS glycan datasets. This tool uses user-defined lists of compositions that specify the glycan chemical space in a given biological context. The program accepts high-resolution LC/MS data using the public mzXML format and is capable of processing a large data file in a few minutes on a standard desktop computer. The program allows mining of HILIC LC/MS data with an output compatible with multivariate statistical analysis. It is envisaged that the Manatee tool will complement more computationally intensive LC/MS processing tools based on deconvolution and deisotoping of LC/MS data. The capabilities of the tool were demonstrated using a set of HILIC LC/MS data on organ-specific heparan sulfates.     

Method for the direct determination of available carbohydrates in low-carbohydrate products using high-performance anion exchange chromatography

An improved method for direct determination of available carbohydrates in low-level products has been developed and validated for a low-carbohydrate soy infant formula. The method involves modification of an existing direct determination method to improve specificity, accuracy, detection levels, and run times through a more extensive enzymatic digestion to capture all available (or potentially available) carbohydrates. The digestion hydrolyzes all common sugars, starch, and starch derivatives down to their monosaccharide components, glucose, fructose, and galactose, which are then quantitated by high-performance anion-exchange chromatography with photodiode array detection. Method validation consisted of specificity testing and 10 days of analyzing various spike levels of mixed sugars, maltodextrin, and corn starch. The overall RSD was 4.0% across all sample types, which contained within-day and day-to-day components of 3.6 and 3.4%, respectively. Overall average recovery was 99.4% (n = 10). Average recovery for individual spiked samples ranged from 94.1 to 106% (n = 10). It is expected that the method could be applied to a variety of low-carbohydrate foods and beverages.     

Programmable large area digital microfluidic array with integrated droplet sensing for bioassays

We describe a new device concept for digital microfluidics, based on an active matrix electrowetting on dielectric (AM-EWOD) device. A conventional EWOD device is limited by the number of electrical connections that can be made practically, which restricts the number and type of droplet operations. In an AM-EWOD, the patterned electrodes of a conventional EWOD device are replaced by a thin film transistor (TFT) array, as found in a liquid crystal display (LCD), facilitating independent control of each electrode. The arrays can have many thousand individually addressable electrodes, are fully reconfigurable and can be programmed to support multiple simultaneous operations. Each element is 210 μm × 210 μm in size and contains a circuit that measures the electrical impedance of the liquid above it. This is used to determine the presence and size of a droplet, a method that can improve assay reliability and accuracy. This sensor provides feedback, error detection and closed loop control of an assay sequence. We describe the design, fabrication and testing of a 64 × 64 format AM-EWOD device with impedance sensor functionality. A colorimetric assay is implemented on the device and used to measure glucose in human blood serum. Results are compared with the same assay performed on a microtitre plate.