Comparison between the pervaporation and vapor permeation performances of polycarbonate membranes

The pervaporation and vapor permeation performance of symmetrical and asymmetrical polycarbonate membranes, prepared via a dry-phase inversion and wet-phase inversion methods, respectively, were studied by measuring the permeation rate and separation factor. It was found that the polymer concentration effect on the pervaporation performance for the symmetrical polycarbonate membrane was lower than that for the asymmetrical polycarbonate membrane. Compared with pervaporation, vapor permeation has a significantly increased separation factor with a decreased permeation rate for the symmetrical polycarbonate membrane. Water molecules preferentially dissolve into the symmetrical polycarbonate membrane and diffuse easily through the membrane.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Probing stereoselective inhibition of the acyl binding site of cholesterol esterase with four diastereomers of 2'-<Emphasis Type="Italic">N</Emphasis>-α-methylbenzylcarbamyl-1, 1'-bi-2-naphthol

Background  

Recently there has been increased interest in pancreatic cholesterol esterase due to correlation between enzymatic activity in vivo and absorption of dietary cholesterol. Cholesterol esterase plays a role in digestive lipid absorption in the upper intestinal tract, though its role in cholesterol absorption in particular is controversial. Serine lipases, acetylcholinesterase, butyrylcholinesterase, and cholesterol esterase belong to a large family of proteins called the α/β-hydrolase fold, and they share the same catalytic machinery as serine proteases in that they have an active site serine residue which, with a histidine and an aspartic or glutamic acid, forms a catalytic triad. The aim of this work is to study the stereoselectivity of the acyl chain binding site of the enzyme for four diastereomers of an inhibitor.     

Aggregation-driven growth of size-tunable organic nanoparticles using electronically altered conjugated polymers

A novel class of monodisperse conjugated polymer nanoparticles have been readily prepared by the facile reprecipitation of poly{1,3-bis[2-(3-alkylthienyl)]azulene} or poly{1,3-bis[2-(3-alkoxythienyl)]azulene}. The multicomponent poly(bithiophene-alt-azulene) macromolecules were efficiently self-assembled into a wide range of size-tunable nanoparticles from a few tens to five hundred nanometers via the hydrophobic and pi-stacking effects in the mixed chloroform/methanol solutions. Electronically altered polymer structures with different alkyl or alkoxy substitutes exhibited variable self-assembling behaviors to precisely tune the size and the optical/electronic properties of nanoparticles. A strong size dependence of continuous bathochromic absorption and significant enhanced emission were observed with the increase of particle size. A linear relationship between the absorption or fluorescence intensities and the particle size was demonstrated as well, and this is very useful to probe the intermolecular interactions and the size evolutions of conjugated polymer nanoparticles. After the size-dependent optical and electronic properties are created, they can be further optimized to improve the performance of materials prior to the use in novel organic nanodevices in a cost-effective way.     

Suicide inactivation of dioldehydratase by glycolaldehyde and chloroacetaldehyde: an examination of the reaction mechanism

High-level ab initio calculations have been used to study the mechanism for the inactivation of diol dehydratase (DDH) by glycolaldehyde or 2-chloroacetaldehyde. As in the case of the catalytic substrates of DDH, e.g., ethane-1,2-diol, the 5'-deoxyadenosyl radical (Ado*) is able to abstract a hydrogen atom from both substrate analogues in the initial step on the reaction pathway, as evidenced by comparable energy barriers. However, in subsequent step(s), each substrate analogue produces the highly stable glycolaldehyde radical. The barrier for hydrogen atom reabstraction by the glycolaldehyde radical is calculated to be too high ( approximately 110 kJ mol-1) to allow Ado* to be regenerated and recombine with the cob(II)alamin radical, the latter therefore remaining tightly bound to DDH. As a consequence, the catalytic pathway is disrupted, and DDH becomes an impotent enzyme. Interconversion of equivalent structures of the glycolaldehyde radical via the symmetrical cis-ethanesemidione radical is calculated to require 38 kJ mol-1. EPR indications of a symmetrical cis-ethanesemidione structure are likely to be the result of formation of an equilibrium mixture of glycolaldehyde radical structures, this equilibration being facilitated by partial deprotonation of the glycolaldehyde radical by the carboxylate of an amino acid residue within the active site of DDH.     

Free energy perturbation study of water dimer dissociation kinetics

An efficient approach is described for using accurate ab initio calculations to determine the rates of elementary condensation and evaporation processes that lead to nucleation of aqueous aerosols. The feasibility of the method is demonstrated in an application to evaporation rates of water dimer at 230 K. The method, known as ABC-FEP (ab initio/classical free energy perturbation), begins with a calculation of the potential of mean force for the dissociation (evaporation) of small water clusters using a molecular dynamics (MD) simulation with a model potential. The free energy perturbation is used to calculate how changing from the model potential to a potential calculated from ab initio methods would alter the potential of mean force. The difference in free energy is the Boltzmann-weighted average of the difference between the ab initio and classical potential energies, with the average taken over a sample of configurations from the MD simulation. In principle, the method does not require a highly accurate model potential, though more accurate potentials require fewer configurations to achieve a small sampling error in the free energy perturbation step. To test the feasibility of obtaining accurate potentials of mean force from ab initio calculations at a modest number of configurations, the free energy perturbation method has been used to correct the errors when some standard models for bulk water (SPC, TIP4P, and TIP4PFQ) are applied to water dimer. To allow a thorough exploration of sampling issues, a highly accurate fit to results of accurate ab initio calculations, known as SAPT-5s, as been used a proxy for the ab initio calculations. It is shown that accurate values for a point on the potential of mean force can be obtained from any of the water models using ab initio calculations at only 50 configurations. Thus, this method allows accurate simulations of small clusters without the need to develop water models specifically for clusters.     

Evidence that the β‐Peptide 14‐Helix is Stabilized by β3‐Residues with Side‐Chain Branching Adjacent to the β‐Carbon Atom

Oligomers of β‐substituted β‐amino acids (‘β³‐peptides') are known to adopt a helical secondary structure defined by 14‐membered ring hydrogen bonds ('14‐helix'). Here, we describe a deca‐β³‐peptide, 1 , that does not adopt the 14‐helical conformation and that may prefer an alternative secondary structure. β³‐Peptide 1 is composed exclusively of residues with side chains that are not branched adjacent to the β‐C‐atom (β³‐hLeu, β³‐hLys, and β³‐hTyr). In contrast, an analogous β‐peptide, 2 , containing β³‐hVal residues in place of the β³‐hLeu residues of 1 , adopts a 14‐helical conformation in MeOH, according to CD data. These results illustrate the importance of side‐chain branching in determining the conformational preferences of β³‐peptides.     

Reactions of RSe− (R = Me,Ph) Groups in [RSeFe(CO)4I and [RSeCr(CO)5−]

The anionic [MeSeFe(CO)₄] and [MeSeCr(CO)₅] complexes were synthesized by reaction of [PPN][HFe(CO)₄] and [PPN][HCr(CO)₅] with MeSeSeMe respectively via nucleophilic cleavage of the Se-Se bond. The ease of cleavage of the Se-Se bond follows the nucleophilic strength of metal-hydride complexes. Methylation of [RSeCr(CO)₅^?] by the soft alkylating agent MeI resulted in the formation of neutral (MeSeMe)Cr(CO)₅ in THF at 0°C. In contrast, the [ICr(CO)₅^?] was isolated at ambient temperature. Reaction of [MeSeFe(CO)₄^?] or [MeSeCr(CO)₅^?] with HBF₄ yielded (CO)₃Fc(μ-SeMe)₂Fe(CO)₃ dimer and anionic [(CO )₅Cr (μ-SeMe)Cr(CO)₅^?] respectively, and no neutral (HSeMe)Fe(CO)₄ and (HSeMe)Cr(CO)₅ were detected spectrally (IR) even at low temperature. Reaction of NOBF₄ or [Ph₃C][BF₄] and [MeSeCr(CO)₅^?] resulted in the neutral monodentate (MeSeSeMe)Cr(CO)₅ complex. Addition of 1 equiv CpFe(CO)₂I to 2 equiv [MeSeCr(CO)₅^?] gave CpFe(CO)₂(SeMe) and the anionic [(CO)₅Cr(μ-SeMe)Cr(CO)₅^?] in THF at ambient temperature.     

Pulsed field gel electrophoresis: studies of DNA migration made with the programmable, autonomously-controlled electrode electrophoresis system

We have studied the migration of DNA in pulsed field agarose gels under a variety of electrophoresis conditions. We have made use of an instrument which can generate electric fields of any orientation, magnitude, or duration to compare different separation techniques for DNA molecules of from 1 to several thousand kilobase pairs. We discuss the capabilities of the system and present results of gel runs in which electrophoresis conditions were changed individually or in combination. The mobility of DNA in pulsed field gels is shown to reflect a number of interdependent physical parameters.