Formation of bamboo-shaped carbon nanotubes on carbon black in a fluidized bed

For the first time, bamboo-shaped multiwalled carbon nanotubes, having diameter of the order of 50 nm, have been grown on carbon black in a fluidized bed in bulk amount. The activation energy for the synthesis of the product was found out to be around 33 kJ/mol in the temperature range of 700−900 °C. The carbon nanotubes were separated from the carbon black by preferential oxidation of the later, the temperature of which was determined by thermogravimetry. The transmission electron microscopy revealed different features of the nanotubes such as “Y” junction, bend, and catalyst filling inside the nanotubes. Small angle neutron scattering was performed on the nanotubes synthesized at different temperatures. The data were fitted into a suitable model in order to find out the average diameter, which decreases with increase in synthesis temperature. The Monte Carlo simulation predicts the same behavior. Based on the above observations, a possible growth mechanism has been predicted. The oscillation in carbon saturation value inside the catalyst in the fluidized bed has been indicated as the responsible factor for the bamboo-shaped structure.     

Grafting Vinyl Monomers onto Poly(ethylene Terephthalate) (PET). IV. Graft Copolymerization of Methyl Methacrylate onto PET Fibers Using Acetyl Acetonate Complexes of Mn(III), Co(III), and Fe(III)

The graft copolymerization of methyl methacrylate onto poly-(ethylene terephthalate) using metal complexes of Mn³⁺, Co³⁺, and Fe³⁺ as initiators was studied. The rate of polymerization, R_p, increased with increasing complex concentrations.

The rate of polymerization was also studied by varying monomer concentrations. Increasing monomer concentrations, the rate of polymerization increases significantly. The graft yield increases with increasing temperature within the range 60–75°C. The graft yield is medium dependent. A suitable kinetic scheme has been pictured and rate equations have been derived.     

Grafting Vinyl Monomers onto Silk Fibers. V. Graft Copolymerization of Methyl Methacrylate onto Silk with Potassium Permanganate as Initiator

The graft copolymerization of methyl methacrylate onto silk fibers in aqueous solution with the use of manganese (IV) ions as initiator was investigated. The rate of grafting was determined by varying monomer, acidity of the medium, temperature, nature of silk, and the reaction medium. The graft yield increases significantly with increase of manganese (IV) concentration up to 15 meq/liter; with further increase of manganese (IV) concentration, the graft yield decreases. The effect of the increase of monomer concentration brings about a significant enhancement in the graft yield up to 7%, and with further increase of monomer concentration the graft yield decreases. The graft yield is considerably influenced by chemical modification prior to grafting. The effect of some inorganic salts and anionic surfactants on the rate of grafting has been investigated.     

Study of carbon black obtained by pyrolysis of waste scrap tyres

Waste scrap tyres were thermally decomposed under various conditions. Decompositions were followed by the TGA method. Specific heating regimes were tested to obtain optimal structural properties of resulting pyrolytic carbon black produced by pyrolysis of scrap tyres and the process was characterized in temperature interval from 380 to 1,200 °C and heating rate 10, 20 and 50 °C min^?1 under nitrogen atmosphere. The original scrap tyres and pyrolytic carbon black were characterized by Raman and Fourier transform infrared spectroscopy methods. Textural properties were also determined. Effect of temperature and heating rate on process of pyrolysis of scrap tyres was observed. Shifting of temperature of maximum pyrolysis rate to lower value and spreading of DTG peak is caused by increasing heating rate. Temperature 570 °C was sufficient for total scrap tyres pyrolysis. Graphitic and disordered structure was distinguished in the formed carbon black by Raman spectroscopy. With increasing temperature, heating rate and weight loss, the amount of the graphitic structure was reduced at the expense of disordered structure. Destruction of nonporous scrap tyres and formation of porous structure took place at higher temperature. Porous carbon black is formed above 380 °C, specific surface area increased up to 88 m² g^?1 .     

Functional silver nanostructured surfaces applied in SERS and SIMS

Present article deals with functionality of silver nanostructured surfaces prepared by potentiostatic electrochemical deposition on the paraffin impregnated graphite electrode as template‐free substrates. The effect of the electrodeposition conditions on two silver surface functions: analytical signal enhancement in Surface‐enhanced Raman spectroscopy and pre‐ionization function, applied in secondary ion mass spectrometry (SIMS) is reported. Functional silver nanostructured substrate was prepared at a potential ?850 mV with a deposition duration of 20 min. Analytical signal enhancement factors of 3.2 ×10⁵ for Raman peak at 649 cm^?1, 3.0×10⁵ for peak at 810 cm^?1 and 2.7×10⁵ for peak at 1539 cm^?1 were determined for Rhodamine 6G at deposited surface. Slight pre‐ionization effect has been observed in SIMS, and 1.2×10⁵ fold signal enhancement was established for fragment of Rhodamine 6G with m/z 429 (M‐CH₃‐Cl). Electrochemical preparation of nanostructures represents a step towards surface integration directly into miniaturized systems and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Higher-order Sobolev embeddings and isoperimetric inequalities

Optimal higher-order Sobolev type embeddings are shown to follow via isoperimetric inequalities. This establishes a higher-order analogue of a well-known link between first-order Sobolev embeddings and isoperimetric inequalities. Sobolev type inequalities of any order, involving arbitrary rearrangement-invariant norms, on open sets in Rⁿ${\mathbb{R}}^n$, possibly endowed with a measure density, are reduced to much simpler one-dimensional inequalities for suitable integral operators depending on the isoperimetric function of the relevant sets. As a consequence, the optimal target space in the relevant Sobolev embeddings can be determined both in standard and in non-standard classes of function spaces and underlying measure spaces. In particular, our results are applied to any-order Sobolev embeddings in regular (John) domains of the Euclidean space, in Maz'ya classes of (possibly irregular) Euclidean domains described in terms of their isoperimetric function, and in families of product probability spaces, of which the Gauss space is a classical instance.     

Challenges for impedimetric affinity sensors targeting protein detection

The review provides articles discussing big challenges behind successful design of impedimetric biosensors and the way such challenges were/could be addressed for highly sensitive affinity detection of proteins. In particular, the effect of gold etching by chloride ions or by CN^? ions (released from the redox probe [Fe(CN)₆]^3-/4-), the effect of ionic strength of the assay buffer; the effect of initial interfacial properties (capacitance) and the effect of the high analyte:bioreceptor ratio on electrochemical impedance spectroscopy–based biosensing are discussed. The review provides also short discussion related to other factors, which can significantly affect operational performance of electrochemical impedance spectroscopy–based biosensing including novel conductive interfaces, small bioreceptors, strategies for improved selectivity (nonbiofouling interfaces) and sensitivity (use of nanoparticles).     

Effects of accelerated carbonation on properties of ceramic-based geopolymers

Journal of Thermal Analysis and Calorimetry - Geopolymers are considered as environmentally friendly binders with a high potential not only to lower the prices of binders, but mainly to decrease...