古代丝织品及古建彩画蓝色染料的微量及无损分析

染料分析是研究织物颜色老化变色的基础,同时对于了解我国印染工艺的发展有非常重要的作用。通过薄层色谱和拉曼光谱方法,对六个唐代丝绸样品的蓝色染料和故宫建福宫建筑彩画的蓝色物进行了分析,并对两种方法在文物上的适用性进行了比较。结果表明这些呈色物质均为靛蓝,靛蓝不仅作为染料被古人使用,也被当作颜料用于彩绘壁画,使用范围非常广范。两种分析的方法各有利弊,拉曼光谱是无损分析,薄层色谱需要样品量少,但可获得更多的信息。     

Low temperature fired Ni-Cu-Zn ferrite with Bi4Ti3O12

The Ni-Cu-Zn ferrites with different contents of Bi₄Ti₃O₁₂ ceramics (1-8 wt%) as sintering additives were prepared by the usual ceramic technology and sintered at 900 °C to adapt to the low temperature co-fired ceramic (LTCC) technology. The magnetic and dielectric properties of the ferrite can be effectively improved with the effect of an appropriate amount of Bi₄Ti₃O₁₂. For all samples, the ferrite sintered with 2 wt% Bi₄Ti₃O₁₂ has relatively high density (98.8%) and permeability, while the ferrite with 8 wt% Bi₄Ti₃O₁₂ has relatively good dielectric properties in a wide frequency range. The influences of Bi₄Ti₃O₁₂ addition on microstructure, magnetic and dielectric properties of the ferrite have been discussed.     

Periodic intensity variations on the pulse-train of a passively mode-locked fiber ring laser

We investigate the evolvement of the periodic intensity variations of the pulse-train in a fiber ring laser mode-locked by the nonlinear polarization rotation technique. It is found that the phenomenon of such intensity fluctuations is related to the orientation of the polarization controllers when the pump power is fixed. The numerical results show that the mechanism of the periodic intensity variations is caused by the interaction of the nonlinear polarization rotation and the passive polarizer in the cavity.     

The Ag+ induced solution–liquid–solid growth, photoluminescence and photocatalytic activity of twinned ZnSe nanowires

Cubic ZnSe nanowires with periodically alternating twins along the wire growth direction are synthesized in the ZnCl₂–Na₂SeO₃–AgNO₃–ethylenediamine (EN)-ethylene glycol (EG)-polyvinyl–pyrrolidone (PVP) solvothermal system at 180°C for 12 h. The twinned ZnSe nanowires have diameters of 75±10 nm and lengths of >10 micrometers, and grow along 〈111〉 direction. The role of AgNO₃ in the formation of ZnSe nanowires was investigated, and an Ag⁺ induced solution–liquid–solid growth mechanism is also proposed to account for the conversion of microspheres assembled from ZnSe nanocrystallites into ZnSe nanowires. Compared with ZnSe microspheres, the as-prepared twinned ZnSe nanowires exhibit stronger band edge emissions of the wurtzite- and zinc-blende-structured ZnSe and lower deep defect related emission, and their photocatalytic ability is weaker than that of ZnSe microspheres. The results suggest that this simple, mild, one-step solution approach to fabricate ZnSe nanowires may be employed for the synthesis of other selenium compounds with one dimensional nanostructures, and provides opportunities for both fundamental research and technological applications.     

Mechanochemical-synthesized Al-doped manganese dioxides for electrochemical supercapacitors

Al-doped MnO₂ as electrode materials for supercapacitor were synthesized by high-energy ball milling. The morphologies and structures of prepared MnO₂ were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Electrochemical investigation indicated that doped MnO₂ presented preferable electrochemical performances than un-doped MnO₂, but there were obvious capacitance decline in the first several dozen of cycles for all doped MnO₂ samples. The Al_0.05/Mn_0.95O₂ electrode, especially, showed the largest capacitance among all prepared MnO₂ samples. Excellent conductivity of Al in doped MnO₂ was considered to be responsible for enhanced electrochemical performances of doped MnO₂.     

An Efficient Protocol for the Secure Multi-party Quantum Summation

In this paper, a new and efficient quantum protocol which allows a group of mutually distrustful players to perform the summation computation is proposed. Different from previous protocols, we utilize the multi-particle entangled states as the information carriers. A third party, i.e. TP, is assumed semi-honest in the two-party quantum summation protocol. All various kinds of outside attacks and participant attacks are discussed in detail. In addition, we code all players’ Bell-basis measurement outcomes into one classical bit (cbit). Not only the cost of classical information in the public communication network is decreased, but also the security of the protocol is improved. The protocol is also generalized into multi-party quantum summation. It is secure for the collusive attack performed by at most n−2 players.     

DKP Oscillator with Spin-0 in Three-dimensional Noncommutative Phase Space

The DKP equation with Dirac oscillator potential for spin-0 particles has been studied when both space-space noncommutativity and momentum-momentum noncommutativity are considered. The exact wave functions and corresponding energy levels have been found. Due to the noncommutative effect, the energy spectrum is not degenerate.     

Morphology–luminescence correlations in europium-doped ZnO nanomaterials

In order to investigate the correlations of morphologies and optical properties, different morphologies of Eu-doped ZnO were synthesized by different methods. Specifically, the structure of SiO₂/ZnO:Eu nanoflower was synthesized for the first time and has not been reported previously. One percent was chosen as the Eu doping concentration. The relations of the morphology, diameter, and uniformity with the PL intensity were examined. The PL intensity of ZOE samples has a close relationship with the morphology. The PL intensity order of the different morphologies of ZnO:Eu is as follows: nanorod arrays > thin film > nanospheres > nanoparticles > nanoflowers > nanorods. The PL intensity of nanomaterials is larger, if the diameter of the nanomaterials is larger. However, the size of diameter is not the most important reason. It was found that the sample uniformity plays a key role on ZnO:Eu PL intensity. ZnO:Eu with small particle diameters may have strong photoluminescence intensity, if the nanoparticles are uniform.     

Computational study of plasma-assisted photoacoustic response from gold nanoparticles irradiated by off-resonance ultrafast laser

The gold nanoparticles (AuNPs) are capable of enhancing the incident laser field in the form of scattered near field for even an off-resonance irradiation where the incident laser wavelength is far away from the localized surface plasmon resonance (LSPR). If the intensity of the pulse laser is large enough, this capability can be employed to generate a highly localized free electron (plasma) in the vicinity of the particles. The generated plasma can absorb more energy during the pulse, and this energy deposition can be considered as an energy source for structural mechanics calculations in the surrounding media to generate a photoacoustic (PA) signal. To show this, in this paper, we model plasma-mediated PA pressure wave propagation from a 100-nm AuNPs and the surrounding media irradiated by an ultrashort pulse laser. In this model, the AuNP is immersed in water and the laser pulse width is ranging from 70 fs to 2 ps at the wavelength of 800 nm (off-resonance). Our results qualitatively show the substantial impact of the energy deposition in plasma on the PA signal through boosting the pressure amplitudes up to ～1000 times compared to the conventional approach.     

Transport and abatement of fluorescent silica nanoparticle (SiO<Subscript>2</Subscript> NP) in granular filtration: effect of porous media and ionic strength

The extensive production and application of engineered silica nanoparticles (SiO₂ NPs) will inevitably lead to their release into the environment. Granular media filtration, a widely used process in water and wastewater treatment plants, has the potential for NP abatement. In this work, laboratory-scale column experiments were performed to study the transport and retention of SiO₂ NPs on three widely used porous materials, i.e., sand, anthracite, and granular activated carbon (GAC). Synthetic fluorescent core-shell SiO₂ NPs (83 nm) were used to facilitate NP detection. Sand showed very low capacity for SiO₂ filtration as this material had a surface with limited surface area and a high concentration of negative charge. Also, we found that the stability and transport of SiO₂ NP were strongly dependent on the ionic strength of the solution. Increasing ionic strength led to NP agglomeration and facilitated SiO₂ NP retention, while low ionic strength resulted in release of captured NPs from the sand bed. Compared to sand, anthracite and GAC showed higher affinity for SiO₂ NP capture. The superior capacity of GAC was primarily due to its porous structure and high surface area. A process model was developed to simulate NP capture in the packed bed columns and determine fundamental filtration parameters. This model provided an excellent fit to the experimental data. Taken together, the results obtained indicate that GAC is an interesting material for SiO₂ NP filtration.