Calcium-based hydrated minerals: Promising halogen-free flame retardant and fire resistant additives for polyethylene and ethylene vinyl acetate copolymers

In this study, we evaluated the potential flame retardant effect of calcium-based hydrated minerals, such as hydrated lime, partially and completely hydrated dolomitic limes in polyethylene (MDPE) and ethylene vinyl acetate copolymers (EVA) and compared to that obtained with magnesium di-hydroxide (MDH). The most significant flame retardant effects, observed using the mass loss calorimeter test, indicated that Ca-based MDPE composites showed similar peak Heat Release Rate (pHRR) level to that obtained with MDH composite while the pHRR was lower for Ca-based fillers in EVA compositions. X-ray Diffraction (XRD) data, combined with thermal analysis results, indicated that the calcium di-hydroxide plays a role in the formation of an intumescent cohesive residue during the combustion. Indeed, Ca(OH)₂ reacts with CO₂ formed during the thermal degradation of the polymer to generate CaCO₃ (calcium carbonate) that contributes to the enhancement of the mechanical resistance of the residue.     

Ethylene glycol‐based ionic liquids via azide/alkyne click chemistry

A facile synthetic route for the preparation of dicationic ethylene glycol based‐ionic liquids (ILs) via the azide/alkyne “click” reaction is presented. The copper(I) catalyzed, microwave‐assisted azide/alkyne “click” reaction between diazido‐ethylene glycols and the corresponding alkyne containing IL‐head group enables a simple preparation of different sets of poly(ethylene glycol)‐based ILs. Beside tetra‐ and hexa(ethylene glycol)‐based ILs, also oligomeric (M_n = 400 g/mol) and polymeric ILs (M_n up to 1550 g/mol) could be prepared in good yield and with full conversion of the ionic head group. The prepared ILs were extensively characterized via NMR spectroscopy and ESI‐time‐of‐flight (TOF) mass spectroscopy, revealing the formation of multiply charged ions in the negative mode. Thermal stability proved to be exceptionally high (up to 300 °C) together with low glass‐transition temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of New Iminocoumarins Bearing Parabanic Moieties

The synthesis of novel substituted 3-p-nitro-phenyliminocoumarins and corresponding N-ureaiminocoumarins is described. The condensation of these materials with oxalyl chloride leads to the corresponding N-parabanic iminocoumarins, which have not previously been described, in moderate or good yields and high selectivity. The structures were characterized by Fourier transform infrared, ¹H and ¹³C NMR, and elemental analysis.

Synthesis of Novel Organosilicon Compounds Possessing Fully Substituted Imidazole Nucleus Sonocatalyzed by Fe-Cu/ZSM-5 Bimetallic Oxides

An efficient four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles is described by one-step condensation of an aldehyde, benzil, ammonium acetate, and primary aromatic amine with nanostructure Fe-Cu/ZSM-5 bimetallic oxides in water under ultrasonic irradiation. The short reaction time, good yields, environmental friendly procedure, mild reaction conditions, and convenient operation are important advantage of this protocol. The products generated during the study have been utilized as substrates for synthesis of organosilicon-containing imidazoles. Synthesis of tris(triorganosilyl)methylimidazole derivatives were carried out using organolithium reagent (Me₃Si)₃CLi, prepared via metalation of (Me₃Si)₃CH with methyllithium in tetrahydrofuran, in excellent yields.     

Reaction of Cl with CD4 excited to the second C-D stretching overtone

The effects of vibrational excitation on the Cl+CD(4) reaction are investigated by preparing three nearly isoenergetic vibrational states: mid R:3000 at 6279.66 cm(-1), |2100> at 6534.20 cm(-1), and |1110> at 6764.24 cm(-1), where |D(1)D(2)D(3)D(4)> identifies the number of vibrational quanta in each C-D oscillator. Vibrational excitation of the perdeuteromethane is via direct infrared pumping. The reaction is initiated by photolysis of molecular chlorine at 355 nm. The nascent methyl radical product distribution is measured by 2+1 resonance-enhanced multiphoton ionization at 330 nm. The resulting CD(3) state distributions reveal a preference to remove all energy available in the most excited C-D oscillator. Although the energetics are nearly identical, the authors observe strong mode specificity in which the CD(3) state distributions markedly differ between the three Cl-atom reactions. Reaction with CD(4) prepared in the |3000> mode leads to CD(3) products populated primarily in the ground state, reaction with CD(4) prepared in the |2100> mode leads primarily to CD(3) with one quantum of stretch excitation, and reaction with CD(4) prepared in the |1110> mode leads primarily to CD(3) with one quantum of C-D stretch excitation in two oscillators. There are some minor deviations from this behavior, most notably that the Cl atom is able to abstract more energy than is available in a single C-D oscillator, as in the case of |2100>, wherein a small population of ground-state CD(3) is observed. These exceptions likely result from the mixings between different second overtone stretch combination bands. They also measure isotropic and anisotropic time-of-flight profiles of CD(3) (nu(1)=1,2) products from the Cl+CD(4) |2100> reaction, providing speed distributions, spatial anisotropies, and differential cross sections that indicate that energy introduced as vibrational energy into the system essentially remains as such throughout the course of the reaction.     

Development of Nonenzymatic Hydrogen Peroxide Sensor Based on Successive Pd‐Ag Electrodeposited Nanoparticles on Glassy Carbon Electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing palladium? silver nanoparticles (NPs) on a glassy carbon electrode. The morphology of the modified electrode was characterized by Scanning electron microscopy (SEM). The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability, high sensitivity, excellent selectivity towards reduction of hydrogen peroxide (H₂O₂). The response to H₂O₂ is linear in the range between 0.30 μM to 2.50 mM, and the detection limit is 0.1 μM (at an S/N of 3).     

Development of a Carbon Paste Electrode Modified with Reduced Graphene Oxide and an Imidazole Derivative for Simultaneous Determination of Biological Species of N‐acetyl‐L‐cysteine,Uric Acid and Dopamine

In this work, the modified carbon paste electrode (CPE) with an imidazole derivative 2‐(2,3 dihydroxy phenyl) 4‐methyl benzimidazole (DHPMB) and reduced graphene oxide (RGO) was used as an electrochemical sensor for electrocatalytic oxidation of N‐acetyl‐L‐cysteine (NAC). The electrocatalytic oxidation of N‐acetyl‐L‐cysteine on the modified electrode surface was then investigated, indicating a reduction in oxidative over voltage and an intensive increase in the current of analyte. The scan rate potential, the percentages of DHPMB and RGO, and the pH solution were optimized. Under the optimum conditions, some parameters such as the electron transfer coefficient (α) between electrode and modifier, and the electron transfer rate constant) k_s) in a 0.1 M phosphate buffer solution (pH=7.0) were obtained by cyclic voltammetry method. The diffusion coefficient of species (D) 3.96×10^?5 cm² s^?1 was calculated by chronoamperometeric technique and the Tafel plot was used to calculate α (0.46) for N‐ acetyl‐L‐cysteine. Also, by using differential pulse voltammetric (DPV) technique, two linear dynamic ranges of 2–18 µM and 18–1000 µM with the detection limit of 61.0 nM for N‐acetyl‐L‐cysteine (NAC) were achieved. In the co‐existence system of N‐acetyl‐L‐cysteine (NAC), uric acid (UA) and dopamine (DA), the linear response ranges for NAC, UA, and DA are 6.0–400.0 µM, 5.0–50.0 µM and 2.0–20.0 µM, respectively and the detection limits based on (C=3s_b/m) are 0.067 µM, 0.246 µM and 0.136 µM, respectively. The obtained results indicated that DHPMB/RGO/CPE is applicable to separate NAC, uric acid (UA) and dopamine (DA) oxidative peaks, simultaneously. For analytic performance, the mentioned modified electrode was used for determination of NAC in the drug samples with acceptable results, and the simultaneous determination of NAC, UA and DA oxidative peaks was investigated in the serum solutions, too.     

Mutagenic, antimutagenic and antioxidant activities of a new class of beta-glucoside hydroxyhydroquinone from Anagallis monelli growing in Tunisia

A new skeleton of an O-heteroside natural substance named zinolol, the first representative of a new class of aminated hydroxyhydroquinone, has been isolated from the whole plant Anagallis monelli. Its structure has been established by one and two dimensional NMR spectroscopic procedures. Antioxidant, mutagenic, antimutagenic activities were realised and positive results were recorded.     

The caffeine contents of dietary supplements commonly purchased in the US: analysis of 53 products with caffeine-containing ingredients

As part of a study initiating the development of an analytically validated Dietary Supplement Ingredient Database (DSID) in the United States (US), a selection of dietary supplement products were analyzed for their caffeine content. Products sold as tablets, caplets, or capsules and listing at least one caffeine-containing ingredient (including botanicals such as guarana, yerba mate, kola nut, and green tea extract) on the label were selected for analysis based on market share information. Two or three lots of each product were purchased and analyzed using high-pressure liquid chromatography (HPLC). Each analytical run included one or two National Institute of Standards and Technology (NIST) Standard Reference Materials (SRMs) and two products in duplicate. Caffeine intake per serving and per day was calculated using the maximum recommendations on each product label. Laboratory analysis for 53 products showed product means ranging from 1 to 829 mg caffeine/day. For products with a label amount for comparison (n = 28), 89% (n = 25) of the products had analytically based caffeine levels/day of between −16% and +16% of the claimed levels. Lot-to-lot variability (n = 2 or 3) for caffeine in most products (72%) was less than 10%.