Cyclo- and carbomagnesiation of 1,2-dienes catalyzed by Zr complexes

Cyclo- and carbomagnesiation of 1,2-dienes with EtMgR′ (R′=Et, Br) in the presence of Cp₂ZrCl₂ catalyst lead to alkylidenemagnesiocyclopentanes. Deuterolysis provides insights into the reaction pathways.     

Tandem diazonium salt electroreduction and click chemistry as a novel, efficient route for grafting macromolecules to gold surface

Bis-alkynylated oligoethyleneglycol (OEG) and a monopropargyl-functionalized perfluorinated ethylene glycol (FEG) were clicked to azide-functionalized gold surface (Au–N₃) at room temperature via the well known 1,3 cycloaddition click chemical reaction. The Au–N₃ substrate was obtained by nucleophilic attack of NaN₃ on gold substrates modified by the electrochemical reduction of the , ⁺N₂–C₆H₄–CH₂Br diazonium salt. This electrochemical process yields aryl layer-modified gold of the type Au–C₆H₄–CH₂Br (hereafter Au–Br). The untreated and modified gold plates were examined by XPS, PMIRRAS and contact angle measurements. XPS brought evidence for electrografting aryl layers by the detection of Br3d; azide functionalization by the increase of the N/Br atomic ratio; and click reaction of OEG with Au–N₃ by the increase of O/N ratio. In addition, the perfluorinated plate (Au-FEG) exhibited F1s and characteristic C1s peaks from -(CF₂)₇- chain and terminal CF₃. Infra red spectroscopy (PMIRRAS) evidenced (i) grafting N₃ to Au–Br; (ii) characteristic stretching bands, from ethylene glycol units, C–O–C (1100–1300 cm⁻¹); CF₂ (1000–1100 cm⁻¹) and CF₃ (1100–1350 cm⁻¹) from FEG grafts; and (iii) suppression of alkynyl bands from OEG and FEG after surface click chemistry. More importantly, PMIRRAS results support an important bridging of the bispropargyl oligoethylene glycol at the gold surface. Water drop contact angles were found to be 48.7° and 83.0° for Au-OEG and Au-FEG, respectively, therefore highlighting the control over the hydrophilic/hydrophobic character of the clicked substrate.This work shows that clicking macromolecules to grafted, diazonium salt-derived aryl layers is a novel, simple and valuable approach for designing robust, functional surface organic coatings.     

Improved Euler–Maruyama Method for Numerical Solution of the Itô Stochastic Differential Systems by Composite Previous-Current-Step Idea

In this paper, by composite previous-current-step idea, we propose two numerical schemes for solving the Itô stochastic differential systems. Our approaches, which are based on the Euler–Maruyama method, solve stochastic differential systems with strong sense. The mean-square convergence theory of these methods are analyzed under the Lipschitz and linear growth conditions. The accuracy and efficiency of the proposed numerical methods are examined by linear and nonlinear stochastic differential equations.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

Ab initio investigation of the electronic and vibrational properties for the (CaLi)+ ionic molecule

A wide adiabatic study has been performed for numerous electronic states of CaLi⁺ molecular ion. The adiabatic potential energy curves and their spectroscopic constants (R_e, D_e, ω_e and T_e) have been calculated using an ab initio approach including a nonempirical pseudo-potential for the Ca and Li cores with the core polarisation potentials operator through full configuration interaction (FCI). Thereafter, the energies of vibrational levels and their spacing for all these states have been reported. In addition, the electric dipole moment curves have been investigated for the (1-19) Σ, (1-12) Π and (1-8) Δ electric states. Moreover it lets us check the extreme transition dipole moments (TDM). These behaviours of TDM are more accustomed to estimate the radiative lifetimes for all vibrational levels in 2¹Σ⁺ and 3¹Σ⁺ states. Also, the bound-bound and the bound-free contribution have been calculated precisely and by employing a Franck–Condon (FC) approximation.     

Insight into lattice thermal impedance via equilibrium molecular dynamics: case study on Al

Using results of equilibrium molecular dynamics simulation in conjunction with the Green–Kubo formalism, we present a general treatment of thermal impedance of a crystal lattice with a monatomic unit cell. The treatment is based on an analytical expression for the heat current autocorrelation function which reveals, in a monatomic lattice, an energy gap between the origin of the phonon states and the beginning of the energy spectrum of the so-called acoustic short-range phonon modes. Although, we consider here the f.c.c. Al model as a case example, the analytical expression is shown to be consistent for different models of elemental f.c.c. crystals over a wide temperature range. Furthermore, we predict a frequency ‘window’ where the thermal waves can be generated in a monatomic lattice by an external periodic temperature perturbation.     

The first Chevalley–Eilenberg Cohomology group of the Lie algebra on the transverse bundle of a decreasing family of foliations

In [L. Lebtahi, Lie algebra on the transverse bundle of a decreasing family of foliations, J. Geom. Phys. 60 (2010), 122–133], we defined the transverse bundle V^k$V^k$ to a decreasing family of k$k$ foliations _Fi$F_i$ on a manifold M$M$. We have shown that there exists a (1,1)$(1,1)$ tensor J$J$ of V^k$V^k$ such that J^k≠0$J^k\ne 0$, J^k+1=0$J^{k+1}=0$ and we defined by _LJ(V^k)$L_J\left(V^k\right)$ the Lie Algebra of vector fields X$X$ on V^k$V^k$ such that, for each vector field Y$Y$ on V^k$V^k$, [X,JY]=J[X,Y]$[X,JY]=J[X,Y]$.     

Thermodynamic Study of the Extraction of Inorganic Mercury Compounds in Fish Species of the International Anzali Wetland,Iran

Inorganic mercury concentration was measured in the muscle tissues of four types of fish in the aquatic international Anzali Wetland ecosystem in Guilan. In the same ecosystem, the northern pike is able to concentrate inorganic mercury in its body more than other fish. In each species, a fish with the highest amount of inorganic mercury was selected for determination of thermodynamic parameters of inorganic mercury extraction using calculation of the equilibrium constant and fitting of ln K_c versus inverse temperature at the atmospheric pressure. The origins of thermodynamic parameters were discussed. The extraction processes were done in the range of temperatures from 331.15 to 365.15 K and at atmospheric pressure. Results show that the extraction of mercury compounds from SH groups of sulfhydryl proteins in fish muscle tissue is an endothermic process with a positive value for entropy and Gibbs free energy changes at room temperature.     

Combination of Dispersive Liquid‐Liquid Microextraction with Flame Atomic Absorption for Determination of Trace Ni and Co in Water Samples and Vitamin B12

A dispersive liquid‐liquid microextraction method based on the dispersion of 1,2‐dichlorobenzene as an extraction solvent into an aqueous phase in the presence of ethanol as a dispersive solvent for the preconcentration of Co²⁺ and Ni²⁺ ions is discussed. 1‐Nitroso 2‐naphtol was used as a chelating agent prior to the extraction and the preconcentrated analyte was determined by flame atomic absorption spectrometry. The effect of various experimental parameters including the extraction and dispersive solvent type and volume, pH, amount of the chelating agent, etc. on the microextraction and complex formation was investigated for finding the optimum conditions. The enhancement factors were about 61.9 and 51.8, the calibration graphs were linear in the range of 10‐150 μgL^?1 and 10‐250 μgL^?1 with detection limits of 2.42 μgL^?1 and 1.59 μgL^?1, and RSD (n = 5) of 3.08% and 2.17% for cobalt and nickel, respectively. The method was successfully applied to the determination of Co and Ni in water and vitamin B₁₂.