Combination of solid-phase extraction-hollow fiber for ultra-preconcentration of some triazole pesticides followed by gas chromatography-flame ionization detection

In this study, an extraction and preconcentration technique using solid-phase extraction (SPE) along with hollow fiber (HF) has been developed as an ultra-preconcentration technique for some triazole pesticides in aqueous samples. Triazole pesticides were employed as model compounds to assess the method and were monitored by gas chromatography-flame ionization detection (GC-FID). Initially, an aqueous solution of target analytes was passed through an RP-8 SPE cartridge and then the adsorbed analytes were eluted with μL amounts of toluene. The collected elute was slowly introduced into an HF that had one end blocked. This allowed precipitation inside the lumen and pores of the HF. Finally, the obtained HF was mounted on a home-made solid-phase microextraction syringe and entered into the GC injection port for thermal desorption-GC analysis. The effect of various experimental parameters including injection port temperature, desorption time, state of HF, washing solvent, elution solvent and its volume, sample volume, etc. were investigated for finding the optimum conditions. The calibration graphs were linear in the ranges of 2-1000 ng/mL (penconazole and hexaconazole), 5-1000 ng/mL (tebuconazole), 15-1000 ng/mL (triticonazole) and the detection limits (LODs) ranged from 0.6 to 4.5 ng/mL. The enhancement factors were in the range of 870-950. The relative standard deviations (RSD%) for five repeated experiments (C=250 ng/mL of each pesticide) varied from 4.5 to 8.7%. The relative recoveries obtained for analytes in grape juice samples, spiked with different levels of each pesticide, were in the range of 87-119%.     

Laser Doppler anemometry under plasma conditions. Part II. Measurements in an inductively coupled r.f. plasma

Laser Doppler anemometry is used for the measurements of the plasma and particle velocity profiles in the coil region of an inductively coupled r.f. plasma. Results are reported for a 50 mm i.d. induction plasma torch operated at atmospheric pressure with argon as the plasma gas. The oscillator frequency is 3 MHz and the plate power is varied between 4.6 and 10.5 kW. Plasma velocity measurements are obtained using a fine carbon powder as a tracer. Measurements are also given for larger silicon particles ( ) centrally injected into the discharge under different operating conditions.Nomenclature d _p particle diameter - P ₀ plasma power - Q ₁ powder carrier gas flow rate - Q ₂ plasma gas flow rate - Q ₃ sheath gas flow rate - r distance in the radial direction - V axial plasma velocity - V _p axial particle velocity - Z distance in the axial direction - standard deviation     

Synthesis of Thio Analogues of Quinolone Antibacterials

A facile and rapid synthesis of thio compounds, analogues to ciprofloxacin, and norfloxacin is described.     

Synthesis of Some New Triphenylphosphanylidenes,Alkylphosphonates, and Heterocycles of Pyrazole Derivatives and Their Antimicrobial Activity

Abstract

The reaction of 5(4H)-pyrazolone with phosphorus ylides afforded new triphenylphosphanylidene alkanone derivatives. Moreover, its benzylidene derivative reacted with Wittig–Horner reagents to give the corresponding dialkoxyphosphoryl, alkyl phosphonate, and heterocyclic products. Treatment of pyrazole-4-carbaldehyde with Wittig–Horner reagents and trialkyl phosphites gave the respective alkyl phosphonate adducts. Mechanisms accounting for the formation of the new products are discussed. The biological activity of some of the newly synthesized compounds was also examined.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

Air‐assisted liquid–liquid extraction coupled with dispersive liquid–liquid microextraction and a drying step for extraction and preconcentration of some phthalate esters from edible oils prior to their determination by GC

In this work, a new, cheap, simple, fast, and low organic solvent consuming procedure is proposed for isolation, enrichment, and gas chromatographic determination of some phthalate esters in edible oils. The method is based on a combination of air‐assisted liquid–liquid extraction and dispersive liquid–liquid microextraction followed by a drying step under N₂ gas. Several experimental parameters affecting both extraction and preconcentration steps were investigated and optimized. Under the optimum conditions for the proposed method, wide linear ranges (0.05–800 μg/L) and low detection limits (0.007–0.023 μg/L) were observed. The ranges of enrichment factors and extraction recoveries were 68–340 and 14–68%, respectively. Eventually, the target analytes were successfully determined in different edible oils using the proposed method.     

Evaluation of Antimicrobial Activity of Some Newly Synthesized 4‐Thiazolidinones

The antimicrobial activity of thirteen newly synthesized 4‐thiazolidinones (TZONs) and four dithiolane derivatives was assessed against susceptible and resistant bacteria, including MRSA, as well as Candida albicans. The structure‐activity relationships revealed that 4‐Thiazolidinone derivatives harboring p‐chlorophenyl and dicarboxyethyl at the 2‐ethenyl and 5‐arylidine positions of the thiazolidinone ring display considerable antibacterial properties. No antifungal activity was recorded by all tested compounds against Candida albicans. The possible potentiative (synergistic) effect of the most active compounds to a few commercial antibiotics was also investigated.     

Evaluation of Antifungal and Antioxidant Activity of Newly Synthesized 4‐Thiazolidinones

The antifungal and antioxidant activities of thirty newly synthesized 4‐thiazolidinone (TZON) derivatives were assessed against some fungal species including Candida albicans and Aspergillus niger. The introduction of different arylidene moieties at 5‐positions of the thiazolidinone ring successfully enhanced its biological activity. The structure–activity relationships revealed that 4‐thiazolidinone derivatives harboring dicarboxyethyl (at the 2‐ethenyl) and p‐nitrophenylhydrazyl arm (at the 5‐arylidine positions of the thiazolidinone ring) display considerable antifungal and antioxidant properties.     

An interlaboratory capillary zone electrophoresis-UV study of various monoclonal antibodies,instruments, and ε-aminocaproic acid lots

Capillary zone electrophoresis ultraviolet (CZE-UV) has become increasingly popular for the charge heterogeneity determination of mAbs and vaccines. The ε-aminocaproic acid (eACA) CZE-UV method has been used as a rapid platform method. However, in the last years, several issues have been observed, for example, loss in electrophoretic resolution or baseline drifts. Evaluating the role of eACA on the reported issues, various laboratories were requested to provide their routinely used eACA CZE-UV methods, and background electrolyte compositions. Although every laboratory claimed to use the He et al. eACA CZE-UV method, most methods actually deviate from He's. Subsequently, a detailed interlaboratory study was designed wherein two commercially available mAbs (Waters’ Mass Check Standard mAb [pI 7] and NISTmAb [pI 9]) were provided to each laboratory, along with two detailed eACA CZE-UV protocols for a short-end, high-speed, and a long-end, high-resolution method. Ten laboratories participated each using their own instruments, and commodities, showing excellence method performance (relative standard deviations [RSDs] of percent time-corrected main peak areas from 0.2% to 1.9%, and RSDs of migration times from 0.7% to 1.8% [n = 50 per laboratory], analysis times in some cases as short as 2.5 min). This study clarified that eACA is not the main reason for the abovementioned variations.