Simple and Efficient Procedure for the Friedel–Crafts Acylation of Aromatic Compounds with Carboxylic Acids in the Presence of P2O5/AL2O3 Under Heterogeneous Conditions

An efficient and chemoselective method for the Friedel–Crafts acylation of aromatic compounds using P₂O₅/Al₂O₃ and carboxylic acids. Both aromatic and aliphatic carboxylic acids reacted easily to afford the corresponding aromatic ketones in good yields.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Reaction of N‐(phenyl and methyl)‐C‐arylnitrones with DMAD in ionic liquid: Efficient synthesis of Δ4‐isoxazolines

Facile synthesis of N‐(methyl and phenyl)‐Δ⁴‐isoxazolines via the reaction of (Z)‐N‐(methyl and phenyl)‐C‐arylnitrones with dimethyl acethylenedicarboxylate, DMAD, in ionic liquid is described. (Z)‐N‐methyl‐C‐arylnitrones afforded the high yield of N‐methyl‐Δ⁴‐isoxazolines 4a , 4b , 4c , 4d , 4e in ionic liquid, [bmim]BF₄, at room temperature. However, the reaction of (Z)‐N‐phenyl‐C‐arylnitrones with DMAD afforded the mixtures of cis and trans isomers of related N‐phenyl‐Δ⁴‐isoxazolines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j , 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j ) under these conditions. J. Heterocyclic Chem., (2012).     

Studies on the encapsulation of diclofenac in small unilamellar liposomes of soya phosphatidylcholine

The encapsulation of acid (AD) and sodium diclofenac (SD) in small unilamellar liposomes (SUV) as well as the interactions of the drug with the bilayer was studied. SUV was prepared by sonication from multilamellar liposomes containing soya phosphatidylcholine and diclofenac at various proportions. The size distribution obtained from dynamic light scattering showed that the incorporation of SD decreases significantly the size of the liposomes suggesting that the drug interacts with the bilayer of the liposomes. This size decrease is related with the phase transition of liposomes to mixed micelar solution. The encapsulation of the hydrophilic dye indocyanine green in the aqueous compartment of liposomes showed that the rate of captured dye decreases with SD concentration suggesting the transition of liposomes to mixed micelles. The (31)P NMR analysis indicates that SD interacts with the phosphate of phosphatidylcholine head groups. A schematic model for interaction of SD with phosphatidylcholine of the liposomes in which the diclofenac anion interacts with the ammonium group of the phospholipid and the dichlorophenyl ring occupies a more internal site of bilayer near phosphate group was proposed.     

Structural defects cause TiO2-based photocatalysts to be active in visible light

Oxidation of TiO or Ti2O3 led to the formation of TiO2 with activity in visible light much higher than when TiN was used as a precursor, pointing out the importance of oxygen defects/vacancies for extension of activity of TiO2 into the visible region.     

Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.     

Analysis of complex samples by solvating gas chromatography (supercritical fluid to gas transition)

The various forms of chromatography are primarily determined by differences in the physical state of the mobile phases. The main chromatographic categories include gas chromatography (GC), liquid chromatography, and supercritical fluid chromatography. Adjusting a temperature and pressure will change the mobile phase from liquid to supercritical fluid to gas, with concomitant changes in their physical properties. In this paper, the technique transition-phase chromatography (TPC) is described. In TPC, different mobile phase conditions exist inside the column. This phase transformation within the column results in huge differences in density, solvating power, viscosity, diffusivity, and, as a consequence, in the chromatographic properties of the mobile phase. TPC experiments using capillary columns packed in our laboratory have shown that when the mobile phase is transformed from supercritical fluid to gas, high column efficiencies can be achieved. The transition from supercritical fluid to gas (also called solvating GC), a particular case of the TPC, is evaluated for the separation of complex real samples (environmental, food, and fuels).     

Novel long chain unsaturated diisocyanate from fatty acid: Synthesis,characterization, and application in bio‐based polyurethane

A novel long chain linear unsaturated terminal diisocyanate, 1,16‐diisocyanatohexadec‐8‐ene (HDEDI) was synthesized from oleic acid via Curtius rearrangement. Its chemical structure was identified by FTIR, ¹H NMR, ¹³C NMR, and HRMS. This diisocyanate was used as a starting material for the preparation of entirely bio‐based polyurethanes (PUs) by reacting it with canola diol and canola polyol, respectively. The physical properties and crystalline structure of the PUs prepared from this diisocyanate were compared to their counterparts prepared from similar fatty acid‐derived diisocyanate, 1,7‐heptamethylene diisocyanate (HPMDI). The HDEDI based PUs demonstrated various different properties compared to those of HPMDI based PUs. For example, HDEDI based PUs exhibited a triclinic crystal form; whereas HPMDI based PUs exhibited a hexagonal crystal lattice. In addition, canola polyol‐HDEDI PU demonstrated a higher tensile strength at break than that of canola polyol‐HPMDI, attributed to the higher degree of hydrogen bonding associated with the former sample. Nevertheless, lower Young's modulus and higher elongation in canola polyol‐HDEDI PU were obtained because of the flexibility of the long chain introduced by the HDEDI diisocyanate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3302–3310, 2010     

A simple and rapid dispersive liquid-liquid microextraction method followed by GC-FID for determination of N-methylpyrrolidine in cefepime

A simple, rapid and efficient sample preparation technique, dispersive liquid-liquid microextraction, coupled with gas chromatography-flame ionization detection has been developed to determine N-methylpyrrolidine in cefepime. The effect of various experimental factors on the preparation procedure, such as the nature and volume of extraction and disperser solvents, extraction time, the nature of buffer and its pH, and salt effect, was investigated, optimized and the following results were obtained: extraction solvent, chloroform; dispersive solvent and solvent for dissolving cefepime, a mixture of methanol/water (88:12, v/v); salting out agent, NaCl; and buffer, carbonate/bicarbonate (C=0.5?M, pH=12). The optimized conditions were applied to the real sample (cefepime) for the extraction and determination of N-methylpyrrolidine. The calibration graph is linear from 0.02 to 850?mg/L with the square of correlation coefficient 0.999. LOD and LOQ are 6.4 and 21.2?μg/L in solution, respectively, and 0.2 (2×10(-5) ) and 0.6 (6×10(-5) ) μg/g (%, w/w) in cefepime powder, respectively, using sample size 50?mg. Repeatability of the method is good and RSD% for six repeated experiments (C=170?mg/L) is 6.35%.