A novel method for sulfonation of aromatic rings with silica sulfuric acid

Direct and chemoselective sulfonation of aromatic compounds with silica sulfuric acid in 1,2-dichloeoethane or under solvent-free conditions.     

Evaluation of purification procedures of DNA from maize-meal samples by exploiting different analytical techniques for the assessment of DNA quality

Two different approaches generally applied to achieve purification of DNA extracted from cells were compared: precipitation by organic solvents and enzymatic treatments. We investigated various experimental protocols reported in literature by evaluating DNA purity, integrity and yield. Reliability of analytical techniques normally employed to assess DNA purity and quantity was studied and comments and conclusions were suggested by comparing results obtained by different analytical techniques. Enzymatic treatments prove to be unable of increasing DNA purity while determining a significant degradation. In contrast, optimised conditions for solvent precipitation enabled a sharp increase of DNA purity to be obtained, associated with the maintenance of the initial DNA integrity. The application of the optimised protocol to maize-meal samples allowed us to achieve a good PCR amplification even with those samples which gave poor amplification by following the protocol recommended by the Italian legislation in force for GMO detection in food.     

Synthesis,characterization, crystal structure and electrochemical behavior of a nickel(II) complex of 5,6-dihydro-2H-pyran-3-aldehyde thiosemicarbazone

A new Ni^II complex of 5,6-dihydro-2H-pyran-3-aldehyde thiosemicarbazone (HDPTSC) has been synthesized and characterized by microanalyses, magnetic susceptibility, molar conductance measurements and by spectral methods (i.r., u.v.–vis., ¹H-n.m.r.). The structure of [Ni(DPTSC)₂] · B DMF has been solved using X-ray diffraction and found to be highly symmetrical with a trans -arrangement of the two bidentate ligands. The thiosemicarbazone coordinates as an anionic ligand via the thiosemicarbazone moietys azomethine nitrogen and thiolate sulfur [on loss of the N2 hydrogen]. The electrochemical behavior of the ligand and its Ni^II complex, determined by cyclic voltammetry, shows that the redox process of the ligand was highly irreversible, whereas the redox process of the Ni^II complex was observed as a one electron transfer process in a quasi-reversible and diffusion-controlled reaction.     

A point about electron paramagnetic resonance detection of irradiated foodstuffs

This paper makes a point about the identification of irradiated foodstuffs by means of electron paramagnetic resonance (EPR) or electron spin resonance (ESR). EPR is the most accurate method for such routine applications since radicals are stabilised for a long time in all (or part of) foods that are in solid and dry states; consequently, EPR can be applied to meat and fish bones, fruit and relative products (from vegetal origin). More details are given for mollusc shells, such as oysters and mussels.     

Al(III)-selective electrode based on newly synthesized xanthone derivative as neutral ionophore

The suitability of a xanthone derivative, 1-hydroxy-3-methyl-9H-xanthen-9-one (HMX) as a neutral ionophore for the preparation of a polyvinylchloride (PVC) membrane electrode for aluminum(III) ions was investigated. The prepared electrode exhibits a Nernstian response for Al³⁺ ions over a wide concentration range (1.0 × 10⁻⁶ to 1.6 × 10⁻¹ M) with a limit of detection 6.0 × 10⁻⁷ M. It has a relatively fast response time and can be used for at least three months without any considerable divergence in potentials. The proposed membrane electrode revealed very good selectivity for Al³⁺ ions over a wide variety of other cations and could be used at a working pH range of 3.0-8.5. It was used as an indicator electrode in potentiometric titration of aluminum ions with EDTA and in the determination of Al³⁺ in different real samples.     

Simultaneous kinetic-spectrophotometric determination of sulfide and sulfite and genetic algorithim variable selection using partial least squares calibration

Simultaneous multicomponent analysis is usually carried out using multivariate calibration models, such as the partial least squares (PLS) one, that utilize the full spectrum. It has been shown by both experimental and theoretical considerations that better results can by obtained by proper selection of the spectral range to be included in calculations. A genetic algorithm (GA) is one of the most popular methods for selecting variables for PLS calibration of mixtures with almost identical spectra without loss of predictive capability. In this work, a simple and precise method for rapid and accurate simultaneous determination of sulfide and sulfite ions based on the addition reaction of these ions with new fuchsin at pH 8 and 25°C using PLS regression and GA for variable selection is proposed. The concentrations of sulfide ions varied between 0.05–2.50 and 0.15–2.00 μg/mL, respectively. A series of model solutions containing different concentrations of sulfide and sulfite were used to check the predictive ability of GA-PLS models. The root mean square error of prediction with PLS on the whole data set was 0.19 μg/mL for sulfide and 0.09 μg/mL for sulfite. After the application of GA, these values reduced to 0.04 and 0.03 μg/mL, respectively. The text was submitted by the authors in English.     

Structural characterization and thermal degradation of poly(methylmethacrylate)/zinc oxide nanocomposites

This work is based on the preparation of composites of poly(methylmethacrylate) with zinc oxide nanoparticles synthesized by solution casting method.

Chloroform cast poly(methylmethacrylate) films containing different amounts of ZnO nanoparticles were characterized by XRD, SEM, UV-vis spectroscopy, FTIR spectroscopy and TGA.

The results show that ZnO nanoparticles with a size of 24?nm were fairly dispersed in the polymer matrix. The obtained material had UV shielding capability with optical transparency. Thermal characterization shows that, the nanocomposites were more thermally stable than pure PMMA presenting three degradation steps. Apparent kinetic parameters were determined for each degradation step using peak fitting methodology. According to activation energies, ZnO particles affect simultaneously but oppositely the kinetics of underlying degradation reactions. Thermal stability of the PMMA/ZnO nanocomposites was the result of the overall balance in favor of the inhibiting effect of ZnO.     

Polymorphism in Fe[(p-IC6H4)B(3-Mepz)3]2 (pz = pyrazolyl): impact of supramolecular structure on an iron(II) electronic spin-state crossover

The new ligands Na[(p-IC6H4)B(3-Rpz)3] (R = H, Me) have been prepared by converting I2C6H4 to IC6H4SiMe3 with Li(t)Bu and SiMe3Cl, and then to IC6H4BBr2 with BBr3 and subsequent reaction with 3 equiv of (un)substituted pyrazole and 1 equiv of NaO(t)Bu. These new ligands react with FeBr2 to give either purple, low-spin Fe[(p-IC6H4)B(pz)3]2 or colorless, high-spin Fe[(p-IC6H4)B(3-Mepz)3]2. Depending upon the crystallization conditions, Fe[(p-IC6H4)B(3-Mepz)3]2 can exist both as two polymorphs and as a methylene chloride solvate. An examination of these polymorphs by variable-temperature X-ray crystallography, magnetic susceptibility, and Mossbauer spectroscopy has revealed different electronic spin-state crossover properties for each polymorph and yields insight into the influence of crystal packing, independent of other electronic perturbations, on the spin-state crossover. The first polymorph of Fe[(p-IC6H4)B(3-Mepz)3]2 has a highly organized three-dimensional supramolecular structure and does not undergo a spin-state crossover upon cooling to 4 K. The second polymorph of Fe[(p-IC6H4)B(3-Mepz)3]2 has a stacked two-dimensional supramolecular structure, a structure that is clearly less well organized than that of the first polymorph, and undergoes an abrupt iron(II) spin-state crossover from high spin to low spin upon cooling below ca. 130 K. The crystal structure of the methylene chloride solvate of Fe[(p-IC6H4)B(3-Mepz)3]2 has a similar stacked two-dimensional supramolecular structure, but the crystals readily lose the solvate. The resulting desolvate undergoes a gradual spin-state crossover to the low-spin state upon cooling below ca. 235 K. It is clear from a comparison of the structures that the long-range solid-state organization of the molecules, which is controlled by noncovalent supramolecular interactions, has a strong impact upon the spin-state crossover, with the more highly organized structures having lower spin-crossover temperatures and more abrupt spin-crossover behavior.     

Driver Countries in Global Banking Network

We analyze the network of cross-border bank lending connections among countries from 1977 to 2018. The network includes core countries that lend money and peripheral countries that borrow money from core countries. In nowadays highly connected banking network, financial crisis that start from a country can spread to other countries very fast and cause global affects. We use principal component analysis (PCA) to find the influential lending (core) countries in this network over the years and clusters of borrowing (peripheral) countries related to these impactful core countries. We find three clusters of peripheral countries, with some constant and some changing members over time. This can be a sign of changes in the financial or political interactions among countries. The changes in the role of core countries and how these roles get affected by the important financial crisis in the past decades is investigated. Among 31 of core countries, 7 countries have a partially or constantly important role in the network including France, United Kingdom, United States, Japan, Germany, Chinese Taipei and Switzerland.     

Fabrication and Application of a Sensitive and Highly Stable Copper Hexacyanoferrate Modified Carbon Ionic Liquid Paste Electrode for Hydrogen Peroxide and Glucose Detection

A three‐factor mixture design and response surface methodology were employed to find the optimal weight ratio of graphite powder, n‐dodecylpyridinium hexafluorophosphate and paraffin for the fabrication of a copper hexacyanoferrate modified carbon ionic liquid paste electrode (CuHCFe‐CILPE). The fabricated sensor showed electrocatalytic activity towards oxidation and reduction of hydrogen peroxide. It also was observed that the electrocatalytic activity for hydrogen peroxide oxidation was much higher than the electrocatalytic activity for hydrogen peroxide reduction. Glucose oxidase was then successfully immobilized on the surface of the proposed sensor to examine the possibility of using CuHCFe‐CILPE for the biosensor fabrication.