Proteomic strategies for the identification of proteinaceous binders in paintings

The identification of proteinaceous components in paintings remains a challenging task for several reasons. In addition to the minute amount of sample available, complex and variable chemical composition of the paints themselves, possible simultaneous presence of several binders and contaminants, and degradation of the original materials due to aging and pollution are complicating factors. We proposed proteomic strategies for the identification of proteins in binders of paintings that can be adapted to overcome the requirements and difficulties presented by specific samples. In particular, we worked on (1) the development of a minimally invasive method based on the direct tryptic cleavage of the sample without protein extraction; (2) the use of microwave to enhance the enzymatic digestion yield, followed by the analysis of the peptide mixtures by nanoLC-MS/MS with electrospray ionization (ESI). Moreover, as an additional tool to tackle the problem of contaminating proteins, we exploited the possibility of generating an exclusion list of the mass signals that in a first run had been fragmented and that the mass spectrometer had to ignore for fragmentation in a subsequent run. The methods, tested on model samples, allowed the identification of milk proteins in a sample from paintings attributed to Cimabue and Giotto, thirteenth-century Italian masters, decorating the vaults of the upper church in the Basilica of St. Francis in Assisi, Italy.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Solving a full fuzzy linear programming using lexicography method and fuzzy approximate solution

This paper discusses full fuzzy linear programming (FFLP) problems of which all parameters and variable are triangular fuzzy numbers. We use the concept of the symmetric triangular fuzzy number and introduce an approach to defuzzify a general fuzzy quantity. For such a problem, first, the fuzzy triangular number is approximated to its nearest symmetric triangular number, with the assumption that all decision variables are symmetric triangular. An optimal solution to the above-mentioned problem is a symmetric fuzzy solution. Every FLP models turned into two crisp complex linear problems; first a problem is designed in which the center objective value will be calculated and since the center of a fuzzy number is preferred to (its) margin. With a special ranking on fuzzy numbers, the FFLP transform to multi objective linear programming (MOLP) where all variables and parameters are crisp.     

An improved electrochemical method for the synthesis of some benzofuran derivatives

Electrochemical oxidation of catechol and some 3-substituted catechols (1a--c) has been studied in the presence of 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a--c) participate in a Michael addition reaction with 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) with consumption of only two electrons per molecule of (1a--c) to from the corresponding benzoforans (10a--c). The electrochemical synthesis of benzofurans has been successfully performed at a carbon rod electrode and in an undivided cell with high yields and purity.     

New cold-fiber headspace solid-phase microextraction device for quantitative extraction of polycyclic aromatic hydrocarbons in sediment

A new automated headspace solid-phase microextraction (HS-SPME) sampling device was developed, with the capability of heating the sample matrix and simultaneously cooling the fiber coating. The device was evaluated for the quantitative extraction of polycyclic aromatic hydrocarbons (PAHs) from solid matrices. The proposed device improves the efficiency of the release of analytes from the matrix, facilitates the mass transfer into the headspace and significantly increases the partition coefficients of the analytes, by creating a temperature gap between the cold-fiber (CF) coating and the hot headspace. The reliability and applicability of previously reported cold-fiber devices are significantly enhanced by this improvement. In addition, it can be easily adopted for full automation of extraction, enrichment and introduction of different samples using commercially available autosampling devices. Sand samples spiked with PAHs were used as solid matrices and the effect of different experimental parameters were studied, including the extraction temperature, extraction time, moisture content, and the effect of sonication and modifier under optimal experimental conditions, linear calibration curves were obtained in the range of 0.0009-1000 ng/g, with regression coefficients higher than 0.99 and detection limits that ranged from 0.3 to 3 pg/g. Reproducible, precise and high throughput extraction, monitoring and quantification of PAHs were achieved with the automated cold-fiber headspace solid-phase microextraction (CF-HS-SPME) device coupled to GC-flame ionization detection. Determination of PAHs in certified reference sediments using the proposed approach exhibited acceptable agreement with the standard values.     

Mapping Multiple Components of the Residual Stress Tensor in a Large P91 Steel Pipe Girth Weld Using a Single Contour Cut

The contour method is applied in an innovative manner to measure the distribution of hoop residual stress in a large martensitic-ferritic steel pipe containing a multi-pass girth weld. First, a novel one-step wire electro-discharge machining cut is conducted to divide the pipe lengthways into two halves. The deformation of the cut halves is then measured and analysed in a way that simultaneously gives maps of hoop stress across the wall thickness on both sides of the pipe and automatically accounts for through-thickness hoop bending effects and how they may vary along the pipe. Finally the contour method results are combined with X-ray diffraction residual stress measurements using the principle of superposition to determine the distribution of the axial and radial residual stresses in the pipe. It is thereby demonstrated how the distribution of three direct components of the residual stress tensor in a welded pipe can be readily determined using a “hybrid” contour measurement approach.     

Fabrication and characterization of CMC‐based magnetic superabsorbent hydrogel nanocomposites for crystal violet removal

In this research work, novel magnetic superabsorbent hydrogel nanocomposites (MSHNs) based on carboxymethyl cellulose were prepared via a facile “one‐pot” two step approach. Magnetic iron oxide nanoparticles were in situ synthesized and incorporated into carboxymethyl cellulose/poly(acrylic acid) polymer hydrogel. The morphology and chemical composition of MSHNs as well as the presence of magnetic iron oxide nanoparticles were evaluated by using Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, X‐Ray diffraction, ultraviolet–visible spectroscopy, thermogravimetric analysis, and vibrating sample magnetometer. The effect of different reaction parameters on the swelling capacity of MSHNs was investigated. Furthermore, batch adsorption experiments of crystal violet dye onto MSHNs were studied by varying solution pH, initial dye concentration, and temperature. Evaluation of thermodynamic parameters of crystal violet adsorption confirmed that the adsorption was spontaneous and endothermic process in nature. The equilibrium study revealed that the dye adsorption behavior of MHSNs followed the Redlich‐Peterson isotherm model. Finally, the dye adsorption experiment data was well fitted by the pseudo‐second‐order kinetic model with the regression coefficient (R²) of 0.9979. Our results suggest that the MHSNs with facile preparation method, high swelling capacity, and high dye adsorption capacity may be used as promising adsorbents for fast removal of various dyes from aqueous solutions. Copyright © 2016 John Wiley & Sons, Ltd.     

Optimization and numerical simulation for the extraction system of the H- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software （for Particle Beam Simulations）. The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

QCD Ghost Dark Energy in RS II Braneworld with Bulk-Brane Interaction

We investigate the QCD ghost model of dark energy in the framework of RS II braneworld. We assume there is an energy flow between the brane and bulk, and hence the continuity equation for the ghost dark energy is violated, while it is still preserved for the dark matter on the brane. We find that with the brane-bulk interaction, the equation of state parameter of ghost dark energy on the brane, can cross the phantom line w _D =?1 at the present time, which confirms by some cosmological evidences. This result is in contrast to the standard cosmology where w _D of ghost dark energy never cross the phantom line and the universe enters a de Sitter phase at the late time.     

Size-dependent axial buckling analysis of functionally graded circular cylindrical microshells based on the modified strain gradient elasticity theory

In this paper, a size-dependent first-order shear deformable shell model is developed based upon the modified strain gradient theory (MSGT) for the axial buckling analysis of functionally graded (FG) circular cylindrical microshells. It is assumed that the material properties of FG materials, which obey a simple power-law distribution, vary through the thickness direction. The principle of virtual work is utilized to formulate the governing equations and corresponding boundary conditions. Numerical results are presented for the axial buckling of FG circular cylindrical microshells subject to simply-supported end conditions and the effects of material length scale parameter, material property gradient index, length-to-radius ratio and circumferential mode number on the size-dependent critical buckling load are extensively studied. For comparison purpose, the critical buckling loads predicted by modified couple stress theory (MCST) and classical theory (CT) are also presented. Results show that the size effect plays an important role for lower values of dimensionless length scale parameter. Moreover, it is observed that the critical buckling loads obtained based on MSGT are greater than those obtained based on MCST and CT.