Self-propagating assembly of a molecular-based multilayer

Accelerated growth of a molecular-based material that is an active participant in its continuing self-propagated assembly has been demonstrated. This nonlinear growth process involves diffusion of palladium into a network consisting of metal-based chromophores linked via palladium.     

A design of fluorescent probes for superoxide based on a nonredox mechanism

Fluorometric detection of O2-* is performed based on desulfonylation of 3 to the corresponding fluoresceins 4 through nucleophilic substitution, and this fluorescing process is quite specific toward O2-* over H2O2, t-BuOOH, NaOCl, 1O2, HO*, NO*, and ONOO-. Furthermore, effects of glutathione, cytochrome P450 reductase/NADPH, and diaphorase/NADH are relatively small on the fluorescing process of probe 3 with X = Y = F, which is useful to detect O2-* released from neutrophils stimulated by phorbol myristate acetate with satisfactory sensitivity.     

Decomposition model for phonon thermal conductivity of a monatomic lattice

An analytical treatment of decomposition of the phonon thermal conductivity of a crystal with a monatomic unit cell is developed on the basis of a two-stage decay of the heat current autocorrelation function observed in molecular dynamics simulations. It is demonstrated that the contributions from the acoustic short- and long-range phonon modes to the total phonon thermal conductivity can be presented in the form of simple kinetic formulas, consisting of products of the heat capacity and the average relaxation time of the considered phonon modes as well as the square of the average phonon velocity. On the basis of molecular dynamics calculations of the heat current autocorrelation function, this treatment allows for a self-consistent numerical evaluation of the aforementioned variables. In addition, the presented analysis allows, within the Debye approximation, for the identification of the temperature range where classical molecular dynamics simulations can be employed for the prediction of phonon thermal transport properties. As a case example, Cu is considered.     

Rapid and efficient sonochemical formation of gold nanoparticles under ambient conditions using functional alkoxysilane

Gold nanoparticles (NPs) are rapidly and efficiently formed under ambient conditions with a novel and highly-efficient sonochemical promoter. Despite of the presence of free oxygen, 3-glycidoxypropyltrimethoxysilane (GPTMS) showed remarkable efficiency in promoting the reduction rate of Au (III) than that of conventional promoters (primary alcohols). This is likely attributed to the formation of a variety of radical scavengers, which are alcoholic products from sonochemical hydrolysis of the epoxide group and methoxysilane moieties of GPTMS under weakly acidic conditions. Interestingly, the promotion is quenched by amine- or thiol-functionalized alkoxysilane, thereby producing marginal amounts of gold NPs. Furthermore, products of hydrolyzed GPTMS were confirmed to attach on the surface of gold NPs by attenuated total reflectance-Fourier transform infrared spectroscopy. However, according to transmission electron microscopy images, gold NPs that were produced in the presence of GPTMS tend to fuse with each other as condensation of silanols occurs, forming worm- or nugget-like gold nanostructures. The use of long chain surfactants (i.e. polyethylene glycol terminated with hydroxyl or carboxyl) inhibited the fusion, leading to mono-dispersed gold NPs. Additionally, the fact that this approach requires neither an ultrasound source with high frequency nor anaerobic conditions provides a huge advantage. These findings could potentially open an avenue for rapid and large-scale green-synthesis of gold NPs in future work.     

Novel and Rapid Deep Eutectic Solvent (DES) Homogeneous Liquid–Liquid Microextraction (HLLME) with Flame Atomic Absorption Spectrometry (FAAS) Detection for the Determination of Copper in Vegetables

Novel and fast deep eutectic solvent (DES)-based homogeneous liquid–liquid microextraction (HLLME) was applied for the extraction of copper from vegetable samples followed by flame atomic absorption spectrometry (FAAS). 1,5-diphenyl carbazone (DPC) was used as the chelating agent, and a DES was used as the extraction media. The utilized DES was based on benzyl triphenyl phosphonium bromide and ethylene glycol in a 1:8?mole ratio. The phase separation phenomenon was occurred by changing of sample temperature. Several factors influencing the extraction efficiency were investigated and optimized. Under the optimized conditions, an enhancement factor of 64 was obtained. The limit of detection, based on three signal-to-noise ratio, and limit of quantification were found to be 0.13?µg L^?1 and 5.0?µg L^?1, respectively. The calibration curve was linear within the range of 5.0–250?µg L^?1 with r² > 0.9957. Intra- and inter-day relative standard deviations (%) of 2.1% and 2.6% were obtained at the concentration of 25?µg L^?1. The accuracy of the proposed method was evaluated by analyzing a tomato leaves certified reference material and the results were to be in agreement with the certified value. Finally, the feasibility of the method was successfully confirmed by determination of copper in spinach, lettuce, broccoli, potato, carrot and parsley samples.     

Catalyst-free grinding method: a new avenue for synthesis of 6-amino-3-methyl-4-aryl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile and DFT studies on the mechanistic pathway of this category of compounds

Research on Chemical Intermediates - A novel, efficient, one-pot, catalyst-free grinding procedure for synthesis of 6-amino-3-methyl-4-aryl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile is reported....     

Air‐assisted liquid–liquid extraction coupled with dispersive liquid–liquid microextraction and a drying step for extraction and preconcentration of some phthalate esters from edible oils prior to their determination by GC

In this work, a new, cheap, simple, fast, and low organic solvent consuming procedure is proposed for isolation, enrichment, and gas chromatographic determination of some phthalate esters in edible oils. The method is based on a combination of air‐assisted liquid–liquid extraction and dispersive liquid–liquid microextraction followed by a drying step under N₂ gas. Several experimental parameters affecting both extraction and preconcentration steps were investigated and optimized. Under the optimum conditions for the proposed method, wide linear ranges (0.05–800 μg/L) and low detection limits (0.007–0.023 μg/L) were observed. The ranges of enrichment factors and extraction recoveries were 68–340 and 14–68%, respectively. Eventually, the target analytes were successfully determined in different edible oils using the proposed method.     

Electrochemical investigation of gel polymer electrolytes based on poly(methyl methacrylate) and dimethylacetamide for application in Li-ion batteries

In the present work, gel polymer electrolytes (GPEs) were prepared using poly(methyl methacrylate) (PMMA), lithium perchlorate (LiClO₄) and dimethylacetamide as a plasticizer. Solution-casting technique was used to fabricate GPEs containing different weight percentage of PMMA. The degree of crystallinity of GPE samples was studied by X-ray diffraction (XRD) analysis. Fourier transform infrared (FT-IR) spectroscopy was applied to study the level of interactions between lithium salt and PMMA in the prepared GPEs. Electrochemical properties were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and DC polarization techniques. Lithium ion conductivity of GPEs was determined by calculating the bulk resistance of polymer electrolytes from Nyquist plot. Increasing PMMA content of GPEs resulted in an improvement in the electrochemical potential window from 4.2 to 4.5 V. The highest lithium transference number (0.42) and also the best electrochemical properties were obtained for GPE containing 0.75 M LiClO₄ and 10 wt% PMMA. Scanning electron microscopy images of the optimized GPE showed a porous and heterogeneous surface structure which is desirable for application in Li-ion batteries.     

Trace determination of cadmium in rice samples using solidified floating organic drop microextraction based on vesicular supramolecular solvent followed by flow-injection analysis–flame atomic absorption spectrometry

In this work, a solidified floating organic drop microextraction was developed based on a vesicular supramolecular solvent consisting of decanoic acid and quaternary ammonium. The method was used for preconcentration of trace amount of cadmium in different rice samples followed by flow-injection analysis–flame atomic absorption spectrometry. Several parameters affecting the extraction efficiency including pH, concentration of 1-(2-pyridylazo)-2-naphthol as the chelating agent, sample and extraction solvent volume, stirring rate, extraction time, salt effect, and interfering ions were investigated and optimized. Under the optimum conditions, a preconcentration factor of 84 was achieved. LOD and LOQ were found to be 0.09 and 0.31 µg L^?1, respectively. The calibration curve was linear within the range of 5.0–700 µg L^?1 (r²?>?0.9978). Intra- and inter-day precisions (RSD% n?=?3) were estimated 2.7 and 3.9% at the concentration of 20 µg L^?1, respectively. The accuracy of the method was successfully validated by analysis of an SRM-1643f standard reference material. Relative recoveries were achieved within the range of 93–107% elucidating suitability of the method for determination of cadmium in rice samples.