Rearrangement of epoxynitriles: a convenient homologation of acyclic and cyclic ketones to carboxylic acids

A convenient two-step homologation of both aliphatic and aromatic ketones to the corresponding carboxylic acid has been developed. First ketones were converted to epoxynitriles with the Darzens reaction. Second, a Lewis acid mediated rearrangement of these epoxynitriles with lithium bromide was achieved to give homologated secondary alkanoic acids (as well as aryl-alkanoic) in good yields. The mechanism and the scope of the rearrangement reaction were investigated. This strategy constitutes a two-step homologation of ketones to secondary carboxylic acids.     

Kinetic study of angiotensin converting enzyme activity by capillary electrophoresis after in-line reaction at the capillary inlet

The in-capillary reaction of angiotensin converting enzyme (ACE) with the tripeptide substrate hippuryl-L-histidyl-L-leucine was studied. ACE activity was determined by the quantitation of the product, hippuric acid, at 230 nm. Reaction occurred at the capillary inlet during a predetermined waiting period, followed by the electrophoretic separation of the compounds. When the set-up was reversed, i.e. reaction at the opposite side after short-end injection of enzyme and substrate, separation was achieved in less than 5 min. Using the Lineweaver-Burk equation, an average Michaelis constant for ACE from rabbit lung was calculated to be 1.16 +/- 0.12 mM, a value consistent with previously reported data.     

Far-UV laser flash photolysis in solution. A study of the chemistry of 1,1-dimethylsilene in hydrocarbon solvents

The far-UV (193 nm) laser flash photolysis of nitrogen-saturated isooctane solutions of 1,1-dimethylsiletane allows the direct detection of 1,1-dimethylsilene as a transient species, which (at low laser intensities) decays with pseudo-first-order kinetics (τ 10 μs) and exhibits a UV absorption spectrum with λ_max 255 nm. Characteristic rapid quenching is observed for the silene with methanol (k_McOH = (4.9 ± 0.2) × 10⁹ M⁻¹ s⁻¹), tert-butanol (k_BuOH = (1.8 ± 0.1) × 10⁹ M⁻¹ s⁻¹) and oxygen (k_O2 = (2.0 ± 0.5) × 10⁸ M⁻¹ s⁻¹). The Arrhenius activation parameters for the reaction with methanol have been determined to be E_a = −2.6 ± 0.6 kcal mol⁻¹ and log A = 7.7 ± 0.3.     

Proton affinities of molecules containing nitrogen and oxygen: comparing ab initio and semiempirical results to experiments

We report a comparison of theoretical and experimental proton affinities at nitrogen and oxygen sites within a series of small molecules. The calculated proton affinities are determined using the semiempirical methods AM 1, MNDO , and PM 3; the ab initio Hartree–Fock method at the following basis levels: 3-21G //3-21G , 3-21+G //3-21G , 6-31G *//6-31G *, and 6-31+G (d, p)//6-31G *; and Møller–Plesset perturbation calculations: MP 2/6-31G *//6-31G *, MP 3/6-31G *//6-31G *, MP 2/6-31G +(d, p)//6-31G *, MP 3/6-31G +(d, p)//6-31G *, and MP 4(SDTQ )/6-31G +G (d, p)//6-31G *. The semiempirical methods have more nonsystematic scatter from the experimental values, compared to even the minimal 3-21G level ab initio calculations. The thermodynamically corrected 6-31G *//6-31G * proton affinities provide acceptable results compared to experiment, and we see no significant improvement over 6-31G *//6-31G * in the proton affinities with any of the higher-level calculations. © 1992 John Wiley & Sons, Inc.     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications

This work is devoted to the design of a novel family of hydrosoluble biomaterials: poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐based graft copolymers. A synthesis route has been elaborated in which ω‐functionalized PVP is prepared via chain‐transfer radical polymerization, end‐group modified, and subsequently grafted onto a polyhydroxylated backbone, typically dextran or poly(vinyl alcohol). The resulting graft copolymer biomaterials are designed for use in various biomedical applications, particularly as materials with a stronger potential for plasma expansion than already existing products have. The graft copolymers are potentially degradable because the PVP grafts are connected to the polyol backbone via a hydrolytically labile carbonate or ester linkage. The degradation of the graft copolymers was performed in vitro over a period of 6 weeks. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3652–3661, 2002     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Assay of Kanamycin A by HPLC with Direct UV Detection

The development of a simple reversed phase ion pair liquid chromatographic method for the assay of kanamycin A has been described. Because of the lack of a UV chromophore in the structure of kanamycin A, borate complexation was used to allow direct UV detection at 205 nm. Three columns were evaluated in this study: Zorbax Extend C18 (4.6 mm × 250 mm; 5 μm), XBridge C18 (4.6 mm × 250 mm; 5 μm) and apHera C18 (4.6 mm × 250 mm; 5 μm). The mobile phase was a mixture of 0.1 M disodium tetraborate (pH 9.0) and water (20:80, v/v) supplemented with 0.5 g L^?1 sodium octanesulphonate. Final chromatographic conditions were achieved on the XBridge column at 50 °C. The method was validated according to ICH guidelines and applied to a commercially available sample. It is much faster and more specific than the current microbiological assay prescribed in the European Pharmacopoeia. No expensive equipment is necessary to perform this assay making it a viable replacement.