Binding site exchange kinetics revealed through efficient spin–spin dephasing of hyperpolarized 129Xe

Spin exchange between different chemical environments is an important observable for characterizing chemical exchange kinetics in various contexts, including protein folding, chelation chemistry, and host–guest interactions. Such spins experience effective spin–spin relaxation rate, R_2,eff, that typically shows a dispersive behavior which requires detailed analysis. Here, we describe a class of highly simplified R_2,eff behavior by relying on hyperpolarized ¹²⁹Xe as a freely exchanging ligand reporter. It provides large chemical shift separations that yield reduced expressions of both the Swift–Connick and the Carver–Richards treatment of exchange-induced relaxation. Despite observing a diamagnetic system, R_2,eff is dominated by large Larmor frequency jumps and thus allows detection of otherwise inaccessible analyte concentrations with a single spin echo train (only 0.01% of the overall hyperpolarized spins need to be transiently bound to the molecule). The two Xe hosts cryptophane-A monoacid (CrA-ma) and cucurbit[6]uril (CB6) represent two exemplary families of container molecules (the latter one also serving as drug delivery vehicles) that act as highly efficient phase shifters for which we observed unprecedented exchange-induced relaxivity r₂ (up to 866 s⁻¹ mM⁻¹). By including methods of spatial encoding, multiple data points can be collected simultaneously to isolate the exchange contribution and determine the effective exchange rate in partially occupied binding sites with a single delivery of hyperpolarized nuclei. The relaxivity is directly related to the guest turnover in these systems and temperature-dependent measurements yield an activation energy of E_A = 41 kJ mol⁻¹ for Xe@CrA-ma from simple relaxometry analysis. The concept is transferable to many applications where Xe is known to exhibit large chemical shifts.

Localized detection of hyperpolarized, exchanging Xe spins enables quantitative insights at unprecedented sensitivity for characterizing chemical exchange kinetics in various contexts such as host–guest interactions and displacement assays.     

Simplified micro-method for the quantitative analysis of putrescine, spermidine and spermine in urine

A simplified micro-method for the quantitative analysis of urinary polyamines is described. After acid hydrolysis of urine, the polyamines are converted to fluorescent 1-dimethylaminonaphthalene-5-sulfonyl (Dns; dansyl) derivatives and separated by means of thin-layer chromatography. Dns-NH2, which has been reported to interfere with the determination of putrescine, is well separated from di-Dns-putrescine. Putrescine, spermidine and spermine are quantitated by in situ scanning of their fluorescent spots on the chromatogram. The present method is both sensitive and reproducible. It eliminates a number of time-consuming steps and thus reduces preparative losses. Yet an adequate chromatographic resolution is obtained. Representative polyamine analyses of urine from normal volunteers and from cancer patients are reported. Elevated levels occur in the urines of pregnant women and of patients with various types of cancer.     

Some properties of a thermostable β-xylosidase fromRhodothermus marinus

The extracellular β-xylosidase (EC 3.2.1.37) excreted by the thermophilic eubacteriumRhodothermus marinus when grown on xylan has been investigated. The enzyme has been partially purified by ultrafiltration and gel filtration, and some of its characteristics are presented.Rhodothermus marinus grew on xylan with μmax= 0.4 h^? and the α-xylosidase activity was 50 nkat/mL after 24 h in a batch fermentation. The α-xylosidase activity had a half-life of more than 1 h at 90°C and of 14 h at 85 °C. At 80°C, 80% of the initial activity remained after 24 h. The initial activity increased with increasing temperature, showing maximal activity at 90°C. The β-xylosidase had a pH-optimum of 6 and was stable in the range between pH 5 and 9. At pH 10 and 11, 82 and 66%, respectively, of the initial activity remained after 24 h when incubated at 65°C. The molecular weight was estimated to be 169,000 dalton by gelfiltration.     

Control of lysine reactivity in four-helix bundle proteins by site-selective pKa depression: expanding the versatility of proteins by postsynthetic functionalization

Five 42-residue polypeptides have been designed to fold into hairpin helix-loop-helix motifs that dimerize to form four-helix bundles, and to serve as protein scaffolds for the elucidation at the molecular level of the principles that control and fine-tune lysine and ornithine reactivities in a protein context. Site-selective control of Lys and Orn reactivity provides a mechanism for addressing directly individual residues and is a prerequisite for the site-selective functionalization of folded proteins. Several lysine and one ornithine residues were introduced on the surface and in the hydrophobic core of the folded motif. The reactivity of each residue was determined by measuring the degree of acylation of the trypsin cleaved fragments by HPLC and mass spectrometry. The most reactive residues were Orn34 and Lys19, both of which were located in d positions in the heptad repeat, and therefore in hydrophobic environments. Upon reaction of the helix-loop-helix dimer KA-I with one equivalent of mono-p-nitrophenyl fumarate, Orn34 was acylated approximately three times more efficiently than Lys19, whereas Lys10 (b position), Lys15 (g position), and Lys33 (c position) remained unmodified. In the sequence KA-I-A(15) Lys15 was replaced by an alanine residue and the selectivity of Orn34 over Lys19 increased to approximately a factor of six, probably because Lys15 had the capacity to reduce the pK(a) value of Lys19 and 85 % of site-selectively monoacylated product was obtained. The pH dependence of the acylation reaction was determined and showed that the pK(a) of the reactive residues were 9.3, more than a pK(a) unit below the magnitude of the corresponding residue in a solvent exposed position. Introducing Lys and Orn residues into a or d positions of the heptad repeat therefore serves as a mechanism of depressing their pK(a) to increase their reactivity site selectively. Extensive NMR and CD spectroscopic analyses showed that the sequences fold according to prediction.     

Efficient sample pre-concentration of bupivacaine from human plasma by solid-phase extraction on molecularly imprinted polymers

The ability to use imprinted polymers for solid-phase extraction is demonstrated in a model pre-concentration of bupivacaine from human plasma samples prior to gas chromatography. Imprinting of the structural analogue pentycaine yielded a sorbent which efficiently extracted analyte and internal standard, while possible interference on analyte quantification from leakage of remaining template molecules was eliminated. Human plasma samples were diluted with citrate buffer pH 5, and applied onto solid phase extraction columns containing 15 mg of imprinted sorbent. Wash steps with 20% methanol in water followed by acetonitrile preceded elution with 2% triethylamine in acetonitrile. A direct comparison with conventional sample pre-treatment methods showed the high selectivity of the imprinted sorbent resulted in distinctly cleaner chromatographic traces than were obtained both after liquid-liquid extraction and C18-based solid-phase extraction.     

Redox-switchable direction of photoinduced electron transfer in an Ru(bpy)3(2+)-viologen dyad

Quenching of the 3MLCT excited state of [Ru(bpy)3]2+ (bpy=bipyridine) by the reduction products (MV*+ and MV0) of methyl viologen (MV2+) was studied by a combination of electrochemistry with laser flash photolysis or femtosecond pump-probe spectroscopy. Both for the bimolecular reactions and for the reactions in an Ru(bpy)3(2+)-MVn+ dyad, quenching by MV*+ and MV0 is reductive and gives the reduced ruthenium complex [Ru(bpy)3]+, in contrast to the oxidative quenching by MV2+. Rate constants of quenching (kq), and thermal charge recombination (krec) and cage escape yields (phi(ce)) were determined for the bimolecular reactions, and rates of forward (kf) and backward (kb) electron transfer in the dyad were measured for quenching by MV2+, MV*+, and MV0. The reactions in the dyad are very rapid, with values up to kf = 1.3 x 10(12) s(-1) for *Ru(bpy)3(2+)-MV*+. In addition, a long-lived (tau = 15 ps) vibrationally excited state of MV*+ with a characteristically structured absorption spectrum was detected; this was generated by direct excitation of the MV*+ moiety both at 460 and 600 nm. The results show that the direction of photoinduced electron transfer in a Ru(bpy)3-MV molecule can be switched by an externally applied bias.     

Towards molecular-imprint based SPE of local anaesthetics

Summary Solidago canadensis L., Canadian goldenrod (Asteraceae) has been used in European phytotheraphy for centuries as a component of urological and antiphlogistical remedies. High-performance liquid chromatography (HPLC) coupled with diode-array detection (DAD) and online mass spectrometry (MS) has been used for the separation and quantification of phenolics (chlorogenic acid, caffeic acid, kaempferol-3-O-α-L-rutinoside (nicotiflorin), quercetin-3-O-β-D-rutinoside (rutin), quercetin-3-O-β-D-galactoside (hyperoside), quercetin-3-O-β-D-glucoside (isoquercitrin), quercetin-3-O-β-D-rhamnoside (quercitrin), kaempferol-3-O-α-L-rhamnoside (afzelin) and quercetin from Solidaginis herba. Extracts have been obtained using different technologies. Three aqueous and three alcoholic extracts were studied separately. Reversedphase high-performance liquid chromatography separation of polyphenols on octadecyl sorbent Hypersil was performed, using acetonitrile: acetic acid 2.5 v/v % as eluent in gradient elution. Our results confirm previous reports concerning the presence of several flavonoids. Quantification of the main quercetin glycosides in pharmaceuticals is also reported. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Excited-state proton-coupled electron transfer within ion pairs

The use of light to drive proton-coupled electron transfer (PCET) reactions has received growing interest, with recent focus on the direct use of excited states in PCET reactions (ES-PCET). Electrostatic ion pairs provide a scaffold to reduce reaction orders and have facilitated many discoveries in electron-transfer chemistry. Their use, however, has not translated to PCET. Herein, we show that ion pairs, formed solely through electrostatic interactions, provide a general, facile means to study an ES-PCET mechanism. These ion pairs formed readily between salicylate anions and tetracationic ruthenium complexes in acetonitrile solution. Upon light excitation, quenching of the ruthenium excited state occurred through ES-PCET oxidation of salicylate within the ion pair. Transient absorption spectroscopy identified the reduced ruthenium complex and oxidized salicylate radical as the primary photoproducts of this reaction. The reduced reaction order due to ion pairing allowed the first-order PCET rate constants to be directly measured through nanosecond photoluminescence spectroscopy. These PCET rate constants saturated at larger driving forces consistent with approaching the Marcus barrierless region. Surprisingly, a proton-transfer tautomer of salicylate, with the proton localized on the carboxylate functional group, was present in acetonitrile. A pre-equilibrium model based on this tautomerization provided non-adiabatic electron-transfer rate constants that were well described by Marcus theory. Electrostatic ion pairs were critical to our ability to investigate this PCET mechanism without the need to covalently link the donor and acceptor or introduce specific hydrogen bonding sites that could compete in alternate PCET pathways.

Electrostatic ion pairs provide a general method to study excited-state proton-coupled electron transfer. A PT_aET_b mechanism is identified for the ES-PCET oxidation of salicylate within photoexcited cationic ruthenium–salicylate ion pairs.     

Scattering of a potassium atom beam from potassium promoted catalyst surfaces via electronically excited clusters

Surface scattering of potassium atom beams is observed from surfaces of a potassium promoted catalyst, which is known to emit Rydberg K* species and clusters K _n ^* . The surfaces studied are cut flat from pellets of an industrial catalyst, the promoted iron oxide catalyst for styrene production. The scattering is studied in the temperature range 500–1000 K in an UHV apparatus with a K atom beam at 45° towards the normal, with surface ionization and ion detection over an angular range of ?90° to +90° with respect to the surface normal. Bilobular scattering patterns are observed, which are mainly back-scattering at low temperatures, below 750 K. A large signal due to ions emitted in the backwards direction is also found with a voltage on the sample. This back-scattering indicates that the scatterers are heavy clusters outside the surface. The ion formation in the backwards direction is proposed to be due to collisions with electronically excited clusters K _n ^* of the type recently observed by field ionization detection (Kotarba et al. 1994). The bilobular scattering transforms into asymmetric patterns with a larger forward (specular) lobe at higher temperatures, above 800 K. Only a small fraction of the beam molecules is scattered off the surface. The scattering is well described by inelastic surface scattering theory. This shows that the actual scattering surface is rather flat, which is proposed to be due to an antibonding Rydberg type interaction, of long range (hundreds of Å), between the impinging excited K atom and the surface. The temperature dependence of the neutral scattering gives a barrier of 0.96 eV, close to what is generally found for Rydberg species emission from such surfaces. At larger K surface densities, the contributions to the peaks from the beam flux is shown to agree with this picture involving collisions with excited clusters outside the surface.     

Deviation from Ohm's law in electric field assisted capillary liquid chromatography

Earlier studies of electric field assisted LC (EF-LC) have shown that the effect on charged analytes of the application of an electric field over a capillary LC column is relatively small. Charged analytes can only be affected by the electric field while present in the mobile phase, which makes the effective time for influence of the electric field t(0) independent of retention time. Because the charged analytes only can be affected for a short time the electric field strength ought to be high in order to increase the impact of the electric field on the separation. We have, however, found that only a relatively low electric field strength can be used in EF-LC when pressure is used as main driving force. The useful field strength was limited by a dramatic increase in the current. This increase in current was found to origin from an increased concentration of buffer ions that have an electrophoretic mobility towards the pumped flow.