RP-HPLC analysis of phenolic compounds and flavonoids in beverages and plant extracts using a CoulArray detector

Methods were developed for the analysis of natural antioxidants including phenolic compounds and flavonoids in beverages and plant extracts using gradient HPLC with multi-channel electrochemical coulometric detection. Suitability of various reversed-phase columns for this purpose was compared; pH and mobile phase gradients were optimized with respect to the separation selectivity and sensitivity of detection. Because of different target compounds in various sample types, the overlapping resolution maps and the normalized resolution product approaches described earlier were used to select optimum columns and gradients to suit the analysis of the individual sample types. The methods were applied to the analysis of phenolic compounds and flavonoids in beer, wine, tea, and yacon extracts. 32 phenolic compounds were identified and determined, including derivatives of benzoic and cinnamic acids, flavones, and a few related glycosides. Eight-channel CoulArray detection offers high selectivity and sensitivity with limits of detection in the low microg L(-1) range, at least an order of magnitude lower than single-channel coulometric detection using the Coulochem detector. No special sample pretreatment is necessary and, because of the compatibility of the CoulArray detector with gradient elution, phenolic antioxidants of different polarities can be determined in a single run. In addition to the retention times, the ratios of the areas of the pre-dominant and post-dominant peaks to the area of the dominant peak can be used for improved identification of natural antioxidants.     

Diferratricarbaboranes of the subcloso-[(eta5-C5H5)2Fe2C3B8H11] type, the first representatives of the 13-vertex dimetallatricarbaborane series

Treatment of the [2-Cp-9-tBuNH-closo-2,1,7,9-FeC(3)B(8)H(10)] (1) ferratricarbollide (Cp = eta(5)-C(5)H(5) (-)) with Na(+) C(10)H(8) (-) in 1,2-dimethoxyethane (DME) at room temperature produced an air-sensitive transient anion with a tentatively identified nido-[tBuNH-CpFeC(3)B(8)H(10)](2-) constitution. In-situ reaction of this low-stability ion with [CpFe(CO)(2)I] or [CpFe(CO)(2)](2) generated three violet diferratricarbaboranes identified as paramagnetic subcloso complexes [4,5-Cp(2-)-4,5,1,6,7-Fe(2)C(3)B(8)H(11)] (2; yield 2 %), [4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(11)] (3; yield 2 %), and [7-tBuNH-4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(10)] (4; yield 14 %). These first representatives of the 13-vertex dimetallatricarbaborane family were characterized by EPR and IR spectroscopy, and mass spectrometry, and their structures were determined by X-ray diffraction analysis.     

Rapid speciation of Se(IV) and Se(VI) by flow injection–capillary electrophoresis system with contactless conductivity detection

A flow injection–capillary electrophoresis system with contactless conductivity detection and hydrostatic-pressure-generated flow was used for the fast and sensitive speciation of Se(IV) and Se(VI). The sample throughput was 25 samples per hour using a background electrolyte solution containing 8.75 mM l-histidine (His) adjusted to pH 4.00 with acetic acid. The repeatability of peak areas (n=8) was better than 1.41% and the limits of detection were 190 g L^–1 and 7.5 g L^–1 for Se(IV) and Se(VI), respectively. The interference from carbonate, typically present in water samples, was eliminated by using a low-pH electrolyte in which carbonate is uncharged and migrates at the EOF front. The method was applied to the analysis of Se(IV) and Se(VI) in soil samples that were spiked with both selenium species and the results for recovery of both selenium species were in good agreement with their introduced concentrations.     

Mixed valence in YBaFe(2)O(5)

YBaFe(2)O(5) has been synthesized by heating a nanoscale citrate precursor in a carefully controlled reducing environment. Successful synthesis of a single-phase sample can only be achieved in a narrow window of oxygen partial pressures and temperatures. YBaFe(2)O(5) adopts an oxygen-deficient perovskite-type structure, which contains double layers of corner sharing FeO(5) square pyramids separated by Y(3+) ions. At T(N) congruent with 430 K, tetragonal (P4/mmm) and paramagnetic YBaFe(2)O(5) orders antiferromagnetically (AFM) experiencing a slight orthorhombic distortion (Pmmm). Around this temperature, it can be characterized as a class-III mixed valence (MV) compound, where all iron atoms exist as equivalent MV Fe(2.5+) ions. The magnetic structure is characterized by AFM Fe-O-Fe superexchange coupling within the double layers and a ferromagnetic Fe-Fe direct-exchange coupling between neighboring double layers. Upon cooling below approximately 335 K, a premonitory charge ordering (2Fe(2.5+) --> Fe(2.5+delta) + Fe(2.5)(-delta)) into a class-II MV phase takes place. This transition is detected by differential scanning calorimetry, but powder diffraction techniques fail to detect any volume change or a long-range structural order. At approximately 308 K, a complete charge ordering (2Fe(2.5+) --> Fe(2+) + Fe(3+)) into a class-I MV compound takes place. This charge localization triggers a number of changes in the crystal, magnetic, and electronic structure of YBaFe(2)O(5). The magnetic structure rearranges to a G-type AFM structure, where both the Fe-O-Fe superexchange and the Fe-Fe direct-exchange couplings are antiferromagnetic. The crystal structure rearranges (Pmma) to accommodate alternating chains of Fe(2+) and Fe(3+) running along b and an unexpectedly large cooperative Jahn-Teller distortion about the high-spin Fe(2+) ions. This order of charges does not fulfill the Anderson condition, and it rather corresponds to an ordering of doubly occupied Fe(2+) d(xz) orbitals. Comparisons with YBaMn(2)O(5) and YBaCo(2)O(5) are made to highlight the impact of changing the d-electron count.     

The sorption of some radiocations on microporous titanosilicate ETS-10

The microporous titanosilicate ETS-10 synthesized from gel with following molar composition: 1.0 Na₂O: 1.49 SiO₂ : 0.2 TiO₂ : 0.6 KF : 1.28 HCl : 39.5 H₂O was subjected to sorption of radioactive cations ¹¹⁵Cd²⁺, ²⁰⁴Hg²⁺, ⁶⁰Co²⁺ and ¹³⁷Cs⁺ (M) from aqueous solution, in the absence of ionic competition. The uptake of these cations on the ETS-10 was compared by means of the distribution coefficient (K_d) versus contact time and sorption capacity (R) at equilibrium. The FT-IR spectra of M-ETS-10 sorption products exhibit a modification of the absorption band, principally at 381 cm^-1.     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

On geometries of stacked and H-bonded nucleic acid base pairs determined at various DFT, MP2, and CCSD(T) levels up to the CCSD(T)/complete basis set limit level

The geometries and interaction energies of stacked and hydrogen-bonded uracil dimers and a stacked adeninecdots, three dots, centeredthymine pair were studied by means of high-level quantum chemical calculations. Specifically, standard as well as counterpoise-corrected optimizations were performed at second-order Moller-Plesset (MP2) and coupled cluster level of theory with single, double, and perturbative triple excitations [CCSD(T)] levels with various basis sets up to the complete basis set limit. The results can be summarized as follows: (i) standard geometry optimization with small basis set (e.g., 6-31G(*)) provides fairly reasonable intermolecular separation; (ii) geometry optimization with extended basis sets at the MP2 level underestimates the intermolecular distances compared to the reference CCSD(T) results, whereas the MP2/cc-pVTZ counterpoise-corrected optimization agrees well with the reference geometries and, therefore, is recommended as a next step for improving MP2/cc-pVTZ geometries; (iii) the stabilization energy of stacked nucleic acids base pairs depends considerably on the method used for geometry optimization, so the use of reliable geometries, such as counterpoise-corrected MP2/cc-pVTZ ones, is recommended; (iv) the density functional theory methods fail completely in locating the energy minima for stacked structures and when the geometries from MP2 calculations are used, the resulting stabilization energies are strongly underestimated; (v) the self-consistent charges-density functional tight binding method, with inclusion of the empirical dispersion energy, accurately reproduces interaction energies and geometries of dispersion-bonded (stacked) complexes; this method can thus be recommended for prescanning the potential energy surfaces of van der Waals complexes.     

Zwitterionic ion chromatography with carboxybetaine surfactant-coated particle packed and monolithic type columns

Both particle packed (25 cm x 0.46 cm I.D. SUPELCOSIL 5 microm C18) and monolithic type (10 cm x 0.46 cm I.D. Merck Chromolith Performance C18) reversed-phase substrates were dynamically coated with a carboxybetaine type zwitterionic surfactant ((dodecyldimethyl-amino) acetic acid) and investigated as stationary phases for use in zwitterionic ion chromatography (ZIC). Investigations into eluent concentration and pH were carried out using KCl eluents containing 0.2 mM of the carboxybetaine surfactant to stabilise the column coatings. It was found that eluent concentration decreased anion retention whilst simultaneously increasing peak efficiencies, which may be due to the dissociation of intra- and inter-molecular salts of the carboxybetaine surfactant under higher ionic strength conditions. The Effect of eluent pH was an increase in anion retention with decreased eluent pH due to the increased protonation of the weak acid terminal group of the carboxybetaine, causing both a relative increase in the positive charge of the stationary phase and less repulsion of the anions by the dissociated weak acid group. The carboxybetaine-coated monolithic phase was applied to rapid anion separations using elevated flow rates and flow rate gradients.     

Functionalized nanodiamonds part I. An experimental assessment of diamantane and computational predictions for higher diamondoids

The structures, strain energies, and enthalpies of formation of diamantane 1, triamantane 2, isomeric tetramantanes 3-5, T(d)-pentamantane 6, and D(3d)-hexamantane 7, and the structures of their respective radicals, cations, as well as radical cations, were computed at the B3LYP/6-31G* level of theory. For the most symmetrical hydrocarbons, the relative strain (per carbon atom) decreases from the lower to the higher diamondoids. The relative stabilities of isomeric diamondoidyl radicals vary only within small limits, while the stabilities of the diamondoidyl cations increase with cage size and depend strongly on the geometric position of the charge. Positive charge located close to the geometrical center of the molecule is stabilized by 2-5 kcal mol(-1). In contrast, diamondoid radical cations preferentially form highly delocalized structures with elongated peripheral C-H bonds. The effective spin/charge delocalization lowers the ionization potentials of diamondoids significantly (down to 176.9 kcal mol(-1) for 7). The reactivity of 1 was extensively studied experimentally. Whereas reactions with carbon-centered radicals (Hal)(3)C(*) (Hal=halogen) lead to mixtures of all possible tertiary and secondary halodiamantanes, uncharged electrophiles (dimethyldioxirane, m-chloroperbenzoic acid, and CrO(2)Cl(2)) give much higher tertiary versus secondary selectivities. Medial bridgehead substitution dominates in the reactions with strong electrophiles (Br(2), 100 % HNO(3)), whereas with strong single-electron transfer (SET) acceptors (photoexcited 1,2,4,5-tetracyanobenzene) apical C(4)-H bridgehead substitution is preferred. For diamondoids that form well-defined radical cations (such as 1 and 4-7), exceptionally high selectivities are expected upon oxidation with outer-sphere SET reagents.     

Vibrational spectroscopy of the G...C base pair: experiment, harmonic and anharmonic calculations, and the nature of the anharmonic couplings

The results of harmonic and anharmonic frequency calculations on a guanine-cytosine complex with an enolic structure (a tautomeric form with cytosine in the enol form and with a hydrogen at the 7-position on guanine) are presented and compared to gas-phase IR-UV double resonance spectral data. Harmonic frequencies were obtained at the RI-MP2/cc-pVDZ, RI-MP2/TZVPP, and semiempirical PM3 levels of electronic structure theory. Anharmonic frequencies were obtained by the CC-VSCF method with improved PM3 potential surfaces; the improved PM3 potential surfaces are obtained from standard PM3 theory by coordinate scaling such that the improved PM3 harmonic frequencies are the same as those computed at the RI-MP2/cc-pVDZ level. Comparison of the data with experimental results indicates that the average absolute percentage deviation for the methods is 2.6% for harmonic RI-MP2/cc-pVDZ (3.0% with the inclusion of a 0.956 scaling factor that compensates for anharmonicity), 2.5% for harmonic RI-MP2/TZVPP (2.9% with a 0.956 anharmonicity factor included), and 2.3% for adapted PM3 CC-VSCF; the empirical scaling factor for the ab initio harmonic calculations improves the stretching frequencies but decreases the accuracy of the other mode frequencies. The agreement with experiment supports the adequacy of the improved PM3 potentials for describing the anharmonic force field of the G...C base pair in the spectroscopically probed region. These results may be useful for the prediction of the pathways of vibrational energy flow upon excitation of this system. The anharmonic calculations indicate that anharmonicity along single mode coordinates can be significant for simple stretching modes. For several other cases, coupling between different vibrational modes provides the main contribution to anharmonicity. Examples of strongly anharmonically coupled modes are the symmetric stretch and group torsion of the hydrogen-bonded NH2 group on guanine, the OH stretch and torsion of the enol group on cytosine, and the NH stretch and NH out-of-plane bend of the non-hydrogen-bonded NH group on guanine.