Multiphonon Bundle Emission in a Strong-Coupling Cavity Optomechanical System

Nonclassical effects in mesoscopic systems have attracted much attention recently. In this paper, it is shown that multiphonon bundle emission can be observed in a strong-coupling cavity optomechanical system. Theoretical analysis shows that when the driving field is adjusted to nth-order sideband excitation, the coupling between the cavity mode and the vibrational mode leads to super-Rabi oscillations, and finally results in an n-phonon bundles emission. Based on the current technology, this process can work in a wide range of parameters. Numerical simulation confirms the validity of the derivation. It is thought that this physical mechanism broadens the applications of cavity optomechanical system in realm of quantum phononics, such as in quantum metrology and phonon laser.     

BeF2分子基态势能函数研究

利用密度泛函理论（DFT）B3LYP/aug-cc-PVTZ方法对BeF和BeF2分子进行计算, BeF分子的基态电子态为X2Σ+,平衡核间距Re=0.1367 nm,BeF2分子最稳定构型为D∞h构型,基态电子态为X1Σg+,离解能De=13.4 eV。利用最小二乘法拟合了BeF分子基态的Murrell-Sorbie势能函数,并得到其光谱数据与力常数。结合全局多体项展式方法,导出了基态BeF2分子基态势能函数的解析表达式,该函数准确反映了BeF2分子的结构以及静态反应特征,这些结果为进一步探索BeF2的微观分子反应动力学提供了基础。     

直流辉光放电光谱分析铜合金的基本特性研究

用自行组装的直流辉光放电原子发射光谱（ｄｃ Ｇ Ｄ Ａ Ｅ Ｓ）仪器对分析铜合金的某些基本特性进行了研究 探讨了光源放电室结构、放电气体压力、放电电压等操作参数以及试样尺寸大小对放电性能及元素谱线强度的影响,并进行了优化 考察了在不同放电气压条件下样品的溅射率和优化条件下辉光放电的稳定性最后,分析了铜合金标准样品中的 Ａｌ和 Ｍｎ,结果较满意     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

第一性原理研究Be-S共掺杂AlN纳米片的电子结构和光学性质

基于密度泛函理论体系下广义梯度近似(GGA),利用第一性原理方法计算了Be替代Al、S替代N和Be-S共掺杂对氮化铝纳米片的电子结构和光学性质的影响.计算结果表明,掺杂改变了氮化铝纳米片的带隙,但仍显示半导体特性. Be掺杂类型对氮化铝纳米片的晶体结构影响不大,而S掺杂和Be-S共掺杂都使得氮化铝纳米片有不同程度的弯曲.同时Be-S共掺杂中S原子起到激活受主杂质Be原子的作用,使得受主能级向低能方向移动.共掺杂比单掺杂具有更高的受主原子浓度,并减小局域化程度.光学性质也发生较大改变:S原子掺杂氮化铝纳米片的介电函数虚部出现第二介电峰,Be掺杂和Be-S共掺杂使得损失谱的能量区间有所展宽,峰值降低并向高能区移动.     

锂离子电池PMMA-VAc聚合物电解质的制备与性质研究

以甲基丙烯酸甲酯(MMA)和醋酸乙烯酯(VAc)为单体, 用乳液聚合法合成聚甲基丙烯酸甲酯-醋酸乙烯酯聚合物(PMMA-VAc), 并以此聚合物制备了新型聚烯烃膜支撑的聚合物膜及聚合物电解质. 用红外光谱(FTIR)、凝胶色谱(GPC)、差热和热重分析(DSC/TG)、扫描电镜(SEM)及电池充放电实验等方法研究了聚合物、聚合物膜和聚合物电解质的性质. 红外光谱结果表明, MMA与VAc通过各自的C＝C双键打开聚合成PMMA-VAc. PMMA-VAc易于分散在混合碳酸酯溶剂中并形成凝胶, 凝胶粘度随PMMA-VAc浓度的增加而增加, 当浓度为4%时成膜效果最佳. PMMA-VAc膜具有大量的微孔结构, 具有极强的吸液性能. PMMA-VAc膜具有良好的热稳定性: 在380 ℃范围内保持稳定. 聚烯烃膜支撑的PMMA-VAc膜室温下的离子电导率为1.85×10^－3 S•cm^－1, 用作为锂离子电池的聚合物电解质时, 电池具有良好的循环稳定性和倍率性能.     

团簇增强的纳秒激光电离产生Xez+(z≤20)高价离子

利用功率密度为1011—1012W·cm-2的1064nm纳秒激光电离氙原子团簇，在飞行时间质谱中观察到电离态高达+20的高价离子.不同脉冲束位置实验表明，仅当激光作用于分子束的中段时，才能观察到高价离子，且高价离子的强度随束源压力的增加而迅速增强.实验结果表明束中大尺寸团簇的存在与高价离子的形成密切相关.讨论了高价离子产生的可能机理. 关键词： 氙 纳秒激光 高价离子 飞行时间质谱     

H+和Ar11+激发Si的K壳层X射线发射研究

测量了50–250 keV H⁺和1.0–3.0 MeV Ar¹¹⁺ 轰击Si表面过程中辐射的X射线. 结果表明, 在Ar¹¹⁺入射的情况下, 引起了Si的L壳层上3, 4个电子的多电离.计算了Si的K壳层X射线产生截面, 并将两体碰撞近似(BEA), 平面波恩近似, ECPSSR理论计算与实验值进行了对比. ECPSSR理论与质子产生的截面数据能够很好地符合; 而考虑多电离后, BEA理论与Ar¹¹⁺的实验结果符合较好. 关键词： X射线 高电荷态重离子 多电离     

高压处理种子对提高长春花中长春碱含量的作用

 在室温下对干燥的一年生矮种长春花种子进行了静高压氮气处理,压力分别为10、20、30 MPa,保压4 h。将各处理组与未经高压处理的对照组种子同时在相同的自然条件下进行播种培育。详细观察对比了各组植株的花形等性状,用高效液相色谱检测了生长旺盛期植株中长春碱和长春新碱的含量,另外还观察了剪枝后再生植株的生长性状。结果表明：种子经高压处理的各组长春花植株中的长春碱含量都有显著增加;长春新碱含量也有提高趋势。这种变化与花形改变和再生植株患病率的分布有一定程度的对应关系。初步认为植株体内长春碱含量的提高可能与高压导致的愈伤组织有关。     

吡咯腙对溶酶体中Hg2+的荧光成像

合成了一种新的吡咯腙探针1,用于Hg²⁺的比色和荧光开启检测。探针1对Hg²⁺的检测限为45 nmol·L^-1,缔合常数为5.78×10⁸ L·mol^-1。值得注意的是,工作pH范围为4.0~10.0。Job曲线和MS数据证实探针与Hg²⁺形成1∶1的配合物。通过1H NMR、时间分辨荧光光谱和密度泛函理论(DFT)计算系统研究了探针与Hg²⁺的配位模式。此外,由于吗啉基团的存在,探针可以检测HeLa细胞溶酶体中的Hg²⁺。