北京同步辐射装置3W1B软X射线光束线偏振特性测量

应用自行研制的Mo/Si周期多层膜作为起偏器和检偏器的光学元件, 测量了北京同步辐射装置3W1B束线的偏振状态. 通过数据分析, 得到了3W1B软X射线的有关偏振参数, 在86—89eV能区经过起偏器后的偏振度超过98%, 圆偏振分量介于1%—3%之间.     

现场激光能量计量技术的研究

由于激光能量计传感器的灵敏度与温度条件有关，在温差较大时，有的传感器灵敏度偏差可达到16%，因而在靶场、野外现场温度条件下，现有的激光能量计无法进行准确测试。为了解决这一问题，研制了一种新型的现场激光能量计。在现有激光能量计的基础上，通过选择相对透明、吸收层相对较厚(毫米量级)、热敏面不易损伤的激光吸收材料，对激光能量计内置温度传感器及数字处理电路进行了重新设计，满足了不同温度条件下现场能量测量的需求。     

Whole-field determination of isoclinic parameter by five-step color phase shifting and its error analysis

Combining color imaging with phase shifting, a technique named five-step color phase shifting is presented to determine the whole-field isoclinic parameter. Relevant theory is derived and explicit conditions for directly determining the isoclinic parameter in the range of [0,π/2] are given. The unloaded light intensity of the model is systematically studied. A color camera recorded five isoclinic images coupled with isochromatics from a plane polariscope with five different settings, respectively. Experiments have been carried out with a circular disk under diametral compression and errors have been analyzed and estimated. This technique utilizes white light, which avoids undefined isoclinics near the locations where the isochromatics exist and will have active effect on experimental stress analysis and structural strength design.     

1000V可调脉动直流电源设计

本文将自耦调压器与升压变压器相结合，设计出了一种1000V可调脉动直流电源，构思独特，可广泛应用于可调高压大功率电源的设计。     

Consistency proof of two denoising methods and the parameter selection of PDE filtering method for ESPI

Electronic speckle pattern interferometry （ESPI） is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation （SOOPDE） and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.     

丙烯腈-尿素包合物的形成过程及特征

利用差示扫描量热法(DSC)和X射线衍射(XRD)研究了在不同丙烯腈/尿素投料比情况下的丙烯腈-尿素包合物的形成过程和组成. 实验结果表明DSC是一种研究包合物的客主比及分解热的有效方法. 测定了丙烯腈-尿素包合物的客主比和分解热分别为1.17和5361.53 J/mol. 同时发现丙烯腈-尿素包合物的形成依赖于冷冻时间,在足够长的冷冻时间之后丙烯腈-尿素包合物的组成达到稳定状态. 实验结果表明,丙烯腈分子可能是采用堆叠的方式排布在尿素晶道结构中. XRD结果表明只要丙烯腈分子进入尿素晶格中,丙烯腈-尿素包合物的结构便形成了,并且这种结构与形成过程终了时的结构是一致的. 只要丙烯腈是足量的,包合物中的丙烯腈分子排列会随冷冻时间的延长而增长,直到尿素的晶道结构被丙烯腈分子填满.     

野战激光通信中多口径发射与大口径接收试验研究

针对野战无线激光通信中大气衰减和光强起伏问题,分析了大气对激光通信的影响,探讨了多口径发射与大口径接收对大气影响抑制机理,在此基础上,构建了多口径发射和大口径接收试验装置,发射端发射孔径数目可调,接收端光学天线采用卡塞格伦结构,通过在光学天线前面增加不同口径光阑方式,改变天线口径。发射孔径数目增加到4束时,光强起伏方差约为单光束时的1/2,接收口径直径相差1.5倍时,闪烁方差之间相差1.6倍,验证了对大气湍流的抑制效果。根据理论分析与试验结果,对野战激光通信光端机的部分参数进行了优化设计。     

Photocatalytic degradation efficacy of Bi4Ti3O12 micro-scale platelets over methylene blue under visible light

〈001〉 textured Bi₄Ti₃O₁₂ platelets with micro scale size were synthesized by a facile molten salt method. The photocatalytic activities of the as-prepared samples were measured with the photodegradation of methylene blue at room temperature under visible light irradiation. The Bi₄Ti₃O₁₂ with the aspect ratio of 35 exhibited good absorption in the visible light region and the photodegradation against methylene blue was higher than that of anatase TiO₂ reference, showing that the high degree of preferred {001} facets on the plate surface benefits the electronic transmission. In addition, the layer-pervoskite structure facilitates the mobility of the photogenerated carriers and hampers their recombination. The above results indicated that the large specific surface area of the as-prepared samples could attribute to the presence of a number of oxygen vacancies and then lead to the good photo-electric property. This work proposed an alternative way to tailor the structure of micro-sized platelets to get excellent properties comparable to the nano materials.     

低气压条件下氢气潘宁放电的模拟分析

为更好地理解低气压、弱电离条件下潘宁离子源放电过程中离子和电子的动力学行为, 通过建立二维轴对称模型, 采用粒子模拟与蒙特卡罗相结合(PIC/MCC)的方法, 考虑了电子与氢气之间的弹性碰撞、激发、电离以及氢原子、离子之间的弹性碰撞和电荷交换等过程, 对微型氢气潘宁离子源放电和引出过程进行了数值研究. 考察了磁场位形、壁面二次电子发射系数、引出电压和充气压力对放电过程的影响, 得到了实验中难以诊断得到的放电腔内电子与离子数密度分布, 阳极电流、引出极离子电流、单原子氢离子比例和双原子氢离子比例等宏观参数与实验结果相一致. 通过仿真使得对氢气潘宁放电机制的研究从定性过渡到定量, 这对于潘宁离子源的设计和改进具有重要意义. 关键词： 潘宁放电 氢气 粒子模拟 蒙特卡罗     

吐昔烯衍生物分子的电荷传输性质

根据爱因斯坦方程和Marcus电荷传输模型, 使用密度泛函理论B3lyp/6-31g^**理论水平计算6 个吐昔烯衍生物分子的结构和电荷传输性质. 结果显示: 6个吐昔烯的衍生物分子的空穴迁移速率为0.018–0.062 cm²·V^-1·s^-1, 电子迁移率为0.055–0.070 cm²·V^-1·s^-1, 其中3, 8, 13-辛烷氧基吐昔烯衍生物分子适合作为双极性传输材料. 三条烷氧基链的吐昔烯衍生物分子上引入三个甲氧基或羟基, 均使空穴和电子传输率降低. 引入给电子基团或共轭性基团可减小吐昔烯衍生物分子的能隙, 达到有机半导体的能隙要求. 关键词： 吐昔烯衍生物 空穴传输 电子传输 有机半导体