Clean Aerobic Liquid Oxidation of Aldehydes with Solid Catalyst

Clean liquid oxidation of aldehydes can be accomplished using solid catalyst in the presence of molecular oxygen at room temperature, which is a valuable alternative to traditional counterparts.     

Determination of three compounds in Aloe vera by capillary electrophoresis

A capillary electrophoretic assay for determining aloe-emodin (AE), methyl p-coumarate (MC), and 3,4-dihydro-6,8-dihydroxyl-[(3s)-2'-acetyl-3'-hydroxyl-5'-methoxy-benzyl]-isocoumarin (DDI) in Aloe vera has been developed. Baseline separation was achieved within 15 min using a running buffer of 20 mm borax containing 10% (v/v) acetonitrile at pH 10.5. A linear relationship between the peak area and the concentration of the analytes was found in the ranges 5-500, 10-1000 and 2-1000 micro g/mL for AE, MC and DDI, respectively, with correlation coefficients of 0.9992-0.9998. The relative standard deviations of migration time and peak area were within 0.17-0.19 and 1.52-3.37%, respectively. The recoveries of AE, MC and DDI were 105, 102 and 96.4%. The contents of AE, MC and DDI in Aloe vera were measured to be 5.13, 0.768 and 1.30 mg/g, respectively.     

选相示波伏安法

选相示波伏安法毕树平，都思丹，高鸿（南京大学化学系，２１０００８）关键词示波计时电位法，选相示波伏安法，切口示波计时电位法是利用ｄＥ／ｄｔ～Ｅ曲线上切口的高度或深度进行定量分析的方法［１］，但由于ｄＥ／ｄｔ曲线主要反映充电电流的变化，从而使该方法的检...     

人参挥发油的提取和分析

应用ＧＣ－ＭＳ－ＤＳ联机分析人参挥发油是当前较好的方法，但人参挥发油的提取方法和ＧＣ－ＭＳ条件的选择明显影响人参挥发油这一复杂天然混合物的分离和鉴定。本工作严格控制提取条件，提高了挥发油收率，达０．９５％；选择最佳ＧＣ－ＭＳ条件，鉴定出７６种化合物，该法稳定重现性好。     

双功能型嵌入镍纳米颗粒的碳棱柱状微米棒电极用于电化学甲醇氧化助力的节能产氢

With the rapid development of human society, clean energy forms are imperative to sustain the normal operations of various mechanical and electrical facilities under a cozy environment. Hydrogen is considered among the most promising clean energy sources for the future. Recently, electrochemical water splitting has been considered as one of the most efficient approaches to harvest hydrogen energy, which generates only non-pollutant water on combustion. However, the sluggish anodic oxygen evolution reaction significantly restricts the efficiency of water splitting and requires a relatively high cell voltage to drive the electrolysis. Therefore, seeking a thermodynamically favorable anodic reaction to replace the sluggish oxygen evolution reaction by utilizing highly active bifunctional electrocatalysts for the anodic reaction and hydrogen evolution are crucial for achieving energy-efficient hydrogen production for industrial applications. Nevertheless, it is known that the oxygen evolution reaction can be replaced with other useful and thermodynamically favorable reactions to reduce the electrolysis voltage for realizing energy-efficient hydrogen production. Therefore, in this study, we present a bifunctional nickel nanoparticle-embedded carbon (Ni@C) prism-like microrod electrocatalyst synthesized via a two-step method involving the synthesis of a precursor metal-organic framework-74 and subsequent carbonization treatment for methanol oxidation and hydrogen evolution. The interfacial structure consisting of a nickel and carbon skeleton was realized via in situ carbonization. However, the dispersed nickel nanoparticles do not easily aggregate owing to the partition by the surrounding carbon as it would sufficiently expose the active Ni sites to the electrolytes, ensuring fast charge transfer between the catalyst and electrolytes by accelerating the electrochemical kinetics. In the anodic methanol oxidation, the products were detected as carbon dioxide and formate with faradaic efficiencies of 36.2% and 62.5%, respectively, at an applied potential of 1.55 V. Meanwhile, the Ni@C microrod catalyst demonstrated high activity and durability (2.7% current decay after 12 h of continuous operation) toward methanol oxidation, which demonstrates that methanol oxidation precedes oxidation under voltage forces. Notably, the bifunctional catalyst not only exhibits excellent performance toward methanol oxidation but also yields a low overpotential of 155 mV to drive 10 mA∙cm⁻² toward hydrogen evolution in 1.0 mol∙L⁻¹ KOH aqueous solution with 0.5 mol∙L⁻¹ methanol at room temperature, which guarantees the hydrogen production efficiency. More importantly, the constructed two-electrode electrolyzer produced a current density of 10 mA∙cm⁻² at a low cell voltage of 1.6 V, which decreased by 240 mV after replacing the oxygen evolution reaction with methanol oxidation.     

Chiral polymer hosts for circularly polarized electroluminescence devices

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications. The fabrication of a CP PLED requires a polymer host that provides the appropriate chiral environment around the emitting dopant. However, chemical strategies for the design of chiral polymer hosts remain underdeveloped. We have developed new polymer hosts for CP PLED applications. These polymers were prepared through a free-radical polymerization of 3-vinylcarbazole with a chiral N-alkyl unit. This chiral unit forces the carbazole repeat units to form mutually helical half-sandwich conformers with preferred (P)-helical sense along the polymer main chain. Electronic circular dichroism measurements demonstrate the occurrence of chirality transfer from chiral monomers to achiral monomers during chain growth. The (P)-helical-sense-enriched polymer interacts diastereoselectively with an enantiomeric pair of new phosphorescent (R)- and (S)-dopants. The magnitude of the Kuhn dissymmetry factor (g_abs) for the (P)-helically-enriched polymer film doped with the (R)-dopant was found to be one order of magnitude higher than that of the film doped with the (S)-dopant. Photoluminescence dissymmetry factors (g_PL) of the order of 10⁻³ were recorded for the doped films, but the magnitude of diastereomeric enhancement decreased to that of g_abs. The chiral polymer host permits faster energy transfer to the phosphorescent dopants than the achiral polymer host. Our photophysical and morphological investigations indicate that the acceleration in the chiral polymer host is due to its longer Förster radius and improved compatibility with the dopants. Finally, multilayer CP PLEDs were fabricated and evaluated. Devices based on the chiral polymer host with the (R)- and (S)-dopants exhibit electroluminescence dissymmetry factors (g_EL) of 1.09 × 10⁻⁴ and −1.02 × 10⁻⁴ at a wavelength of 540 nm, respectively. Although challenges remain in the development of polymer hosts for CP PLEDs, our research demonstrates that chiroptical performances can be amplified by using chiral polymer hosts.

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications.     

Highly Enantioselective Phenylacetylene Addition to Benzaldehyde Catalyzed by Chiral Tridentate Ligand

Development of new or improved methods for the asymmetric preparation of chiral propargylic alcohols has gained considerable significance during the past years because they are useful building blocks for the synthesis of many biologically active compounds and natural products.[1] A series of chiral tridentate ligands were conveniently synthesized from amino acids with good yields (Scheme 1).[2] A preliminary study of the enantioselective alkynylation of benzaldehyde catalyzed by this chiral tridentate ligand was carried out and up to 83% ee of chiral propargyl alcohols was obtained (Table 1 ). A further investigation of the tridentate ligand is currently underway.     

Reversible wettability of a chemical vapor deposition prepared ZnO film between superhydrophobicity and superhydrophilicity

A superhydrophobic ZnO thin film was fabricated by the Au-catalyzed chemical vapor deposition method. The surface of the film exhibits hierarchical structure with nanostructures on sub-microstructures. The water contact angle (CA) was 164.3 degrees, turning into a superhydrophilic one (CA < 5 degrees) after UV illumination, which can be recovered through being placed in the dark or being heated. The film was attached tightly to the substrate, showing good stability and durability. The surface structures were characterized by scanning electron microscopy and atomic force microscopy.     

Stereoselective Synthesis of (Z)-α,β-Unsaturated Ketones via Hydromagnesiation of Alkynylsilanes

α,β-Unsaturated ketones are important synthetic intermediates because of their versatile reactivities and many syn-thetic applications of them have been reported in the literature.[1] However, only a few methods for the synthesis of (Z)-α,β-unsaturated ketones are available. The palladium catalyzed coupling reactions of alkenyl copper reagents with acid chlorides afforded (Z)-α,β-unsaturated ketones.[2] The phase transfer catalyzed hydroacylation of allenes with carbon monoxide, decacarbonyldimanganese and methyl iodide gave (Z)-α,β-unsaturated ketones in a stereospecific process.     

The first 1-alkyl-3-perfluoroalkyl-4,5- dimethyl-1,2,4-triazolium salts

Syntheses of quaternary 1-alkyl-3-perfluoroalkyl-4,5-dimethyl-1,2,4-triazolium iodides have led to a variety of new quaternary salts via metathesis reactions. 1,4,5-Trimethyl-3-trifluoro-methyl-1,2,4-triazolium iodide (6) with LiN(SO(2)CF(3))(2), KSO(3)CF(3), AgClO(4), AgBF(4); 1-(3-fluoropropyl)-3-trifluoromethyl-4,5-dimethyl-1,2,4-triazolium iodide (7) with LiN(SO(2)CF(3))(2); and 1,4,5-trimethyl-3-perfluorooctyl-1,2,4-triazolium iodide (8) with LiN(SO(2)CF(3))(2), AgClO(4), AgBF(4) gave excellent yields of new thermally stable and relatively low melting quaternary salts. The structure of 1,4,5-trimethyl-3-perfluorooctyl-1,2,4-triazolium tetrafluoroborate (11c) was confirmed by single-crystal X-ray analysis. Although the molecular weight of 11c (cation) is 3-fold greater than that of the 3-trifluoromethyl derivative 9d, its melting point is 32 degrees C lower.