An analysis of seismic attenuation in random porous media

The attenuation of seismic wave in rocks has been one of the interesting research topics, but till now no poroelasticity models can thoroughly explain the strong attenuation of wave in rocks. In this paper, a random porous medium model is designed to study the law of wave propagation in complex rocks based on the theory of Biot poroelasticity and the general theory of stochastic process. This model sets the density of grain, porosity, permeability and modulus of frame as random parameters in space, and only one fluid infiltrates in rocks for the sake of better simulation effect in line with real rocks in earth strata. Numerical simulations are implemented. Two different inverse quality factors of fast P-wave are obtained by different methods to assess attenuation through records of virtual detectors in wave field (One is amplitude decay method in time domain and the other is spectral ratio method in frequency domain). Comparing the attenuation results of random porous medium with those of homogeneous porous medium, we conclude that the attenuation of seismic wave of homogeneous porous medium is far weaker than that of random porous medium. In random porous media, the higher heterogeneous level is, the stronger the attenuation becomes, and when heterogeneity σ = 0.15 in simulation, the attenuation result is consistent with that by actual observation. Since the central frequency (50 Hz) of source in numerical simulation is in earthquake band, the numerical results prove that heterogeneous porous structure is one of the important factors causing strong attenuation in real stratum at intermediate and low frequency.     

一维新型阶梯函数光子晶体透射特性

研究了阶梯型折射率n22、n11(阶梯分布高度)的大小、对应的分布厚度、不同入射角以及缺陷模对阶梯函数型光子晶体透射特性的影响.由费马原理给出光在函数光子晶体中的运动方程,再由电磁传播理论给出函数光子晶体的传输矩阵,进一步推导出函数光子晶体的透射率以及电场分布的表达式.研究表明,1)随n22,n11大小或者厚度改变,其禁带变宽;2)随光的入射角增加,其禁带变窄;3)当加入缺陷层时,随着缺陷层介质折射率增加,缺陷模强度减小且位置发生红移;4)在函数光子晶体中,缺陷层前电场分布保持不变,而在缺陷层处以及之后的电场强度都明显增强,这不同于常规光子晶体的电场分布仅在缺陷层处局域增强.     

天目铁木愈伤组织和芽苗诱导技术

以天目铁木嫩茎尖为外植体,应用均匀设计法筛选其基部愈伤组织诱导和愈伤组织再分化芽苗的最适合培养基.结果表明,最适合的嫩茎尖基部愈伤组织诱导培养基为1/2DR+TDZ 2.30 mg·L^-1+2,4-D 0.55 mg·L^-1,诱导率为93.5%;愈伤组织芽苗再分化培养基为1/2DR+TDZ 3.30 mg·L^-1+KT 0.70 mg·L^-1,分化率达99.8%以上. 成功建立了天目铁木嫩茎尖离体诱导愈伤组织和芽苗再分化体系,且再生芽苗与野生植株染色体数目相同.     

非线性A_f-B_g型自由基交替共聚反应的固化理论

利用高分子反应统计理论 ,给出了非线性Af-Bg 型自由基交替共聚反应的溶胶 -凝胶分配方程和反应体系的凝胶化条件 ,这些结果是进一步研究与凝胶网络性能相关的网络结构参数的基础     

热敏显色微胶囊的制备与表征

热敏显色微胶囊是用于传真、条形码系统、医用图像、各种打印等领域的重要材料,它是一种内部含有染料隐色体的球形胶囊。染料隐色体是一种内酯结构的无色染料,在一定条件下,与显色剂发生显色反应。由于染料隐色体的化学惰性不够理想,易受外界因素的干扰,因而在应用中受到一定限制,所以为了克服其存在的不足,常将其微胶囊化。微胶囊的芯壁结构可以将芯材与外界隔离,提高芯材的稳定性,同时保留芯材原有的化学性质。当环境温度在微胶囊的玻璃化温度以上时,由于形成微胶囊壁的物质透过性显著增加,因此显色成分接触而发生显色反应。本文利用界面聚合法,以聚乙烯醇为保护胶体,曲拉通X-100为表面活性剂,聚氨酯为壁材,染料隐色体为芯材,合成了聚氨酯热敏显色微胶囊。研究了三个主要因素对微胶囊的粒径及其分布、表面形貌和热敏显色性能的影响。结果表明,增大保护胶体浓度,提高乳化速度,增加乳化剂用量,微胶囊的平均粒径变小,粒径分布变窄,表面变得光滑而且致密,具有较高的热敏显色密度。利用红外光谱仪确认了微胶囊的结构,在最优条件下,所制备的微胶囊玻璃化温度为131 ℃,并具有良好的热稳定性。     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

AFM of adsorbed polyelectrolytes on cellulose I surfaces spin-coated on silicon wafers

Thin layers of cellulose I nanocrystals were spin-coated onto silicon wafers to give a flat model cellulose surface. A mild heat treatment was required to stabilize the cellulose layer. Interactions of this surface with polyelectrolyte layers and multilayers were probed by atomic force microscopy in water and dilute salt solutions. Deflection–distance curves for standard silicon nitride tips were measured for silicon, cellulose-coated silicon, and for polyelectrolytes adsorbed on the cellulose surface. Transfer of polymer to the tip was checked by running deflection–distance curves against clean silicon. Deflection–distance curves were relatively insensitive to adsorbed polyelectrolyte, but salt addition caused transfer of cationic polyelectrolyte to the tip, and swelling of the polyelectrolyte multilayers.     

非线性Af—Bg型自由基交替共聚反应的固化理论

利用高分子反应统计理论,给出了非线性Ａｆ－Ｂｇ型自由基交替共聚反应的溶胶－凝胶分配方程和反应体系的凝凝胶化条件,这些结果是进一步研究与凝胶网络性能相关的网络结构参数的基础。     

Polyoxometalates containing late transition and noble metal atoms

This review describes the state of the art in the field of polyoxometalates containing noble metal atoms (ruthenium, rhodium, palladium, silver, osmium, iridium, platinum and gold). The structures of the various species are listed together with their applications (mainly in catalysis).