Bandgap engineering of self-assembled InAs quantum dots with a thin AlAs barrier

We investigate the effects of a thin AlAs layer with different position and thickness on the optical properties of InAs quantum dots (QDs) by using transmission electron microscopy and photoluminescence (PL). The energy level shift of InAs QD samples is observed by introducing the thin AlAs layer without any significant loss of the QD qualities. The emission peak from InAs QDs directly grown on the 4 monolayer (ML) AlAs layer is blueshifted from that of reference sample by 219 meV with a little increase in FWHM from 42–47 meV for ground state. In contrast, InAs QDs grown under the 4 ML AlAs layer have PL peak a little redshifted to lower energy by 17 meV. This result is related to the interdiffusion of Al atom at the InAs QDs caused by the annealing effect during growing of InAs QDs on AlAs layer.     

Transport with a Very Low Density Contrast in Hele–Shaw Cell and Porous Medium: Evolution of the Mixing Zone

The optimal concentration of a blue dye solution with 'tracer' properties, enabling a pollutant to be marked was determined by the use of numerical, theoretical and experimental approaches. Experimental investigations were performed on a transparent Hele–Shaw cell and the concentration distribution was analyzed using an optical technique based on dye light absorption properties. The injected optimal concentration was established thanks to a theoretical and experimental study carried out on the output signal dynamics. Using the same experimental conditions, numerical simulations were performed. The very good agreement between the data (experimental and numerical) clarified that: (i) the choice of the blue dye optimal concentration was valid and (ii) the concentration-dependent density should not be neglected in flow and transport equations even if it concerns a so-called 'tracer'. Following this remark, a theoretical aspect was developed in order to determine the analogous conditions between a Hele–Shaw cell and a porous medium for the variable density transport phenomenon. The structure of the concentration-dependent dispersion tensor used in the numerical code was obtained by homogenizing the Stokes flow of a bi-component mixture. The numerical results show that, as long as the tracer density does not exceed a certain value, it is not necessary to take into account a density contrast in terms of the dispersion tensor. The classical form of the Taylor dispersion tensor can be used successfully.     

Linearly implicit time discretization of non-linear parabolic equations

We give a stability and error analysis of linearly implicitone-step methods for time discretization of non-linear parabolicequations. We derive precise error bounds for Rosenbrock andW-methods, and we explain the error reduction by Richardsonextrapolation of the linearly implicit Euler method which occursin spite of the breakdown of asymptotic expansions. The parabolicequations are studied in a Hilbert space framework that includessemilinear and quasilinear parabolic equations, and also stiffreaction-diffusion equations with reactions at different timescales.     

Buchbesprechungen

Ohne Zusammenfassung

---

Book reviews

     

Zur konstruktion bewerteter dicksonscher fastkörper

Zusammenfassung  After a short introduction to the valuation theory of nearfields, we give criteria for when a valuation of a skewfield F is also a valuation of the Dickson nearfield F^K which is derived from F by the coupling K on F. For the construction of examples, a rational function field F =K(t) is given. The set of all prolongations of a valuation v on K to F is well known. Sufficient conditions are given which guarantee that couplings K on F and elements are in this sense compatible so that w is a valuation of the Dickson nearfield F^K. Examples demonstrate the results.

     

Antireflective properties of AZO subwavelength gratings patterned by holographic lithography

We fabricate the aluminum-doped zinc oxide (AZO) subwavelength gratings (SWG) on Si and glass substrates by holographic lithography and sequent CH₄/H₂/Ar reactive ion etching process. The etch selectivity of AZO over photoresist mask as well as the nano-scale shape is optimized for better antireflection performance. To analyze the antireflective properties of AZO SWG surface, the optical reflectivity is measured and then calculated together with a rigorous coupled-wave analysis. The reflectance spectrum can be considerably changed by incorporating the SWG into AZO film. As the SWG height of AZO on Si substrate increases, the magnitude of interference oscillations in the reflectance spectrum tends to be reduced with the larger difference between its maxima. The use of optimized SWG can significantly reduce the surface reflection of AZO film at the desired wavelengths. The measured reflectance data of AZO SWG are reasonably consistent with the simulation results. No considerable change in transmission characteristics is observed for AZO SWG structures.     

Box-modeling of bone and tooth phosphate oxygen isotope compositions as a function of environmental and physiological parameters*

A time-dependent box model is developed to calculate oxygen isotope compositions of bone phosphate as a function of environmental and physiological parameters. Input and output oxygen fluxes related to body water and bone reservoirs are scaled to the body mass. The oxygen fluxes are evaluated by stoichiometric scaling to the calcium accretion and resorption rates, assuming a pure hydroxylapatite composition for the bone and tooth mineral. The model shows how the diet composition, body mass, ambient relative humidity and temperature may control the oxygen isotope composition of bone phosphate. The model also computes how bones and teeth record short-term variations in relative humidity, air temperature and δ¹⁸O of drinking water, depending on body mass. The documented diversity of oxygen isotope fractionation equations for vertebrates is accounted for by our model when for each specimen the physiological and diet parameters are adjusted in the living range of environmental conditions.     

Characterization of fish schooling behavior with different numbers of Medaka (Oryzias latipes) and goldfish (Carassius auratus) using a Hidden Markov Model

Fish that swim in schools benefit from increased vigilance, and improved predator recognition and assessment. Fish school size varies according to species and environmental conditions. In this study, we present a Hidden Markov Model (HMM) that we use to characterize fish schooling behavior in different sized schools, and explore how school size affects schooling behavior. We recorded the schooling behavior of Medaka (Oryzias latipes) and goldfish (Carassius auratus  ) using different numbers of individual fish (10–40), in a circular aquarium. Eight to ten 3 s video clips were extracted from the recordings for each group size. Schooling behavior was characterized by three variables: linear speed, angular speed, and Pearson coefficient. The values of the variables were categorized into two events each for linear and angular speed (high and low), and three events for the Pearson coefficient (high, medium, and low). Schooling behavior was then described as a sequence of 12 events (2×2×3$2\times 2\times 3$), which was input to an HMM as data for training the model. Comparisons of model output with observations of actual schooling behavior demonstrated that the HMM was successful in characterizing fish schooling behavior. We briefly discuss possible applications of the HMM for recognition of fish species in a school, and for developing bio-monitoring systems to determine water quality.     

On the Behavior of the Solutions for Certain Linear Autonomous Difference Equations

Certain linear autonomous delay as well as neutral delay difference equations are considered. A class of linear autonomous delay difference equations with continuous variable is also considered. Some results on the behavior of the solutions are established via two distinct positive roots of the corresponding characteristic equation.     

CuSO4/sodium ascorbate catalysed synthesis of benzosuberone and 1,2,3-triazole conjugates: Design,synthesis and in vitro anti-proliferative activity

A novel series of conjugates of benzosuberone and 1,2,3-triazole i.e. 3-(4-phenyl-1H-1,2,3-triazol-1-yl)propyl-9-chloro-2,3-dimethyl-6,7-dihydro-5H-benzo[7]annulene-8-carboxylic acids (8a-j) were synthesized in good to excellent yields catalysed by CuSO₄ under milder reaction conditions and evaluated for their anti-proliferative activity. The structural elucidation of the prepared compounds was carried out using IR, ¹H NMR, ¹³C NMR and Mass spectral analysis. The newly synthesized derivatives (8a-j) were evaluated for their anti-proliferative activity against four human cell lines and the novel derivatives showed moderate to excellent activity. The obtained results suggest that these compounds can be considered as new hits for anti-proliferative drug development programme and further SAR studies can help obtain better anticancer agents.