Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.     

Structural and dynamic properties of polyoxyethylene sorbitan monooleate micelle in water dispersion studied by pulsed field gradient NMR

The diffusion phenomenon of a nonionic surfactant, polyoxyethylene sorbitan monooleate (POE-SMO), micelle in aqueous solution was investigated by pulsed field gradient nuclear magnetic resonance (PFG NMR) with a high gradient strength of 17.4 T/m at the diffusion timet _d varied from 3 to 300 ms. This high gradient strength allowed us to measure the slow self-diffusion coefficient of POE-SMO micelle, and the short diffusion time below 10 ms showed the restricted diffusion of the micelle. At the shortt _d the self-diffusion of the micelle was restricted and the restricted sizes were 1.8, 1.5, and 0.8 μm for the POE-SMO concentration of 100, 200 and 300 mM, respectively, and 0.6 μm for the POE-SMO only. The possible reason of this restriction was assumed to be the formation of a spatial network or a micellar clustering. Furthermore, a proton exchange between water molecule and surfactant OH group on the micelle surface was proposed. With respect to this proposal, the residence time of the proton at the micelle surface and the thickness of the surface were investigated from proton self-diffusion coefficients by PFG NMR.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Infine Functions, Nonsmooth Alternative Theorems and Vector Optimization Problems

In this paper we introduce a new notion of infine nonsmooth functions and give several characterizations of infineness property. We prove alternative theorems with mixed constraints (i.e., inequality and equality constraints) being described by invex-infine nonsmooth functions. We establish a necessary and sufficient condition for a solution of a vector optimization problem involving mixed constraints to be a properly efficient solution.     

Temperature anomaly of the Cd hyperfine field in a trivacancy complex in Ni

The temperature dependence of the Cd hyperfine field in a trivacancy complex in Ni between 25 and300 K is reported. It was found that, unlike the Cd substitutional field in Ni which follows the temperature dependence of the magnetization, the Cd hyperfine field in a trivacancy complex is essentially temperature independent. This temperature anomaly is compared with other temperature anomaly of impurity hyperfine fields in ferromagnetic hosts.     

Structure and defects at Y2BaCuO5 interfaces in melt-textured YBa2Cu3Ox superconductors

Y₂BaCuO₅ (211) inclusions are prominent microstructural features found in melt-textured YBa₂Cu₃O_x (123) superconductors. These particles are of interest because the 123/211 interfaces and the interface-associated defects have been proposed to be flux pinning centers. In addition, the 211 particles are believed to be heterogeneous nucleation centers of dislocation which can increase the critical current density of 123. Unfortunately, only limited studies have been performed on these particles to ascertain their roles in flux pinning. In this investigation, 211 particles, the interfacial structure and defects in undeformed and mechanically deformed melt-textured 123 have been studied by transmission electron microscopy. It was found that there appears to be a preferred orientation between large oblong 211 particles and the 123 matrix. In addition, while the 123/211 interfaces in undeformed 123 are sharp and relatively undistorted, the interfaces in deformed 123 samples are much thicker. Also, the distribution of strained regions and dislocations around oblong 211 particles in undeformed 123 is nonuniform; the interfaces of low surface curvature are relatively free of defects while the surfaces of high curvature are abundant in dislocations. In contrast, the 123/211 interfaces in deformed 123 samples contain high density of dislocations regardless of interface curvature.     

Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

Laser-induced breakdown of soda-lime glass microspheres using Nd:YAG laser

The Nd:YAG laser-induced breakdown of 20 μm glass microspheres was investigated using time-resolved optical shadow and Schlieren images. Time-resolved imaging showed the location of the initial breakdown and the shockwave motion over its first 400 μm of expansion. Measured shockwave velocities were in the range of 1–10 km/s and showed a linear dependency on laser fluence within 30 ns.