Efficient oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under microwave irradiation

An efficient method for the oxidation of benzylic alcohols with [hydroxy(tosyloxy)iodo]benzene under solvent-free microwave irradiation conditions is described.     

Fluorescent peptide-based sensors for the ratiometric detection of nanomolar concentration of heparin in aqueous solutions and in serum

New fluorescent peptide-based sensors (1–3) for monitoring heparin in serum sample were synthesized using short peptides (1∼3mer) as a receptor. The peptide-based sensors (2 and 3) showed a sensitive ratiometric response to heparin both in aqueous buffered solution (10 mM HEPES, pH 7.4) and in 2% human serum sample by increase of excimer emission of pyrene at 480 nm and concomitant decrease of monomer emission of pyrene at 376 nm, whereas the peptide-based sensor 1 showed a turn off response only by decrease of monomer emission at 376 nm. 2 and 3 exhibited excellent selectivity toward heparin among various anions and competitors of heparin including chondroitin 4-sulfate (ChS) and hyaluronic acid (HA). Peptide-based sensor 3 showed a more sensitive response to heparin than 2. The detection limit of 3 was determined as 36 pM (R² = 0.998) for heparin in aqueous solution and 204 pM (R² = 0.999) for heparin in aqueous solutions containing 2% human serum. The peptide-based sensors, 2 and 3 provided a practical and potential tool for the detection and quantification of heparin in real biological samples.     

Redox energetics of hypercloso boron hydrides B(n)H(n) (n = 6-13) and B12X12 (X = F, Cl, OH, and CH3)

The reduction potentials (E°(Red) versus SHE) of hypercloso boron hydrides B(n)H(n) (n = 6-13) and B(12)X(12) (X = F, Cl, OH, and CH(3)) in water have been computed using the Conductor-like Polarizable Continuum Model (CPCM) and the Solvation Model Density (SMD) method for solvation modeling. The B3LYP/aug-cc-pvtz and M06-2X/aug-cc-pvtz as well as G4 level of theory were applied to determine the free energies of the first and second electron attachment (ΔG(E.A.)) to boron clusters. The solvation free energies (ΔG(solv)) greatly depend on the choice of the cavity set (UAKS, Pauling, or SMD) while the dependence on the choice of exchange/correlation functional is modest. The SMD cavity set gives the largest ΔΔG(solv) for B(n)H(n)(0/-) and B(n)H(n)(-/2-) while the UAKS cavity set gives the smallest ΔΔG(solv) value. The E°(Red) of B(n)H(n)(-/2-) (n = 6-12) with the G4/M06-2X(Pauling) (energy/solvation(cavity)) combination agrees within 0.2 V of experimental values. The experimental oxidative stability (E(1/2)) of B(n)X(n)(2-) (X = F, Cl, OH, and CH(3)) is usually located between the values predicted using the B3LYP and M06-2X functionals. The disproportionation free energies (ΔG(dpro)) of 2B(n)H(n)(-) → B(n)H(n) + B(n)H(n)(2-) reveal that the stabilities of B(n)H(n)(-) (n = 6-13) to disproportionation decrease in the order B(8)H(8)(-) > B(9)H(9)(-) > B(11)H(11)(-) > B(10)H(10)(-). The spin densities in B(12)X(12)(-) (X = F, Cl, OH, and CH(3)) tend to delocalize on the boron atoms rather than on the exterior functional groups. The partitioning of ΔG(solv)(B(n)H(n)(2-)) over spheres allows a rationalization of the nonlinear correlation between ΔG(E.A.) and E°(Red) for B(6)H(6)(-/2-), B(11)H(11)(-/2-), and B(13)H(13)(-/2-).     

Polyoxyethylene as the stationary phase in ion chromatography

The present article reviews the use of polyethylene glycol (PEG) or polyoxyethylene (POE) as the stationary phase for the separation of inorganic anions in ion chromatography and discusses about the retention mechanisms involved in the separation of anions on the novel stationary phases. PEG permanently coated on a hydrophobic stationary phase retained anions in the partition mode and allowed us to use high-concentration eluents because the retention of anions increased with increasing eluent concentration for most of the eluents. This situation was convenient to determine trace anions contained in seawater samples without any disturbance due to matrices. Chemically bonded POE stationary phases retained not only anions but also cations. Anions were retained in the ion-exchange mode, although POE chains possess no ion exchange sites. The retention behavior suggested that eluent cations could be trapped among multiple POE chains via ion-dipole interaction, and that the trapped cations worked as the anion-exchange sites. Anions could be separated using crown ether, i.e., cyclic POE, as the eluent additive with a hydrophobic stationary phase, where analyte anions were retained via electrostatic interaction with the eluent cation trapped on the crown ether.     

Bi-phasic nanostructures for functional applications

Biphasic solid state composites of the type metal/metal oxide or element/element oxide can be synthesized in one pot chemical reactions using so called molecular "single source precursors". Due to their singular genesis these composites show peculiar hetero-structures based on core-shell hierarchies such as superlattices and composite nanospheres or nanowires. They exhibit superior or new functional properties compared to their individual constituent compounds. In the current work, we review in particular the synthetical and mechanistical approach of bi-phasic (Al/Al(2)O(3)) nanostructures such as nanospheres, nanowires and nanoloops using a single source precursor. Other bi-phasic materials of the general formula M/MO(x) (for example M = Ge, Sn, Pb) are addressed for comparison. The impact of different synthetical conditions as well as of modification of surfaces by laser techniques and their technological relevance are presented briefly. Additionally, functional applications of the prepared surfaces are explained with some outstanding case studies. These case studies are primarily concerned with their use as biomaterials and their application in medicine as well as with their use as thin films for optics and functional surfaces.     

Simultaneous determination of inorganic cations by capillary ion chromatography with a non-suppressed contactless conductivity detector

A non-suppressed capillary ion chromatographic method with a laboratory-made packed cation-exchange column (100 mm × 0.32 mm i.d.) was developed for the separation and simultaneous determination of five common inorganic cations (sodium, ammonium, potassium, magnesium and calcium). Cation exchangers were prepared by the reaction of the hydroxyl group on the surface of diol-group bonded silica gel with 1,3-propanesultone in methanol. Simultaneous separation of these five common inorganic cations were achieved within 17 min using 1 mM methanesulfonic acid and 0.1 mM 15-crown-5 ether in methanol-water (8:2, v/v) as the eluent. The effects of organic solvents and crown ethers in the eluent on the retention of analytes were investigated. The limits of detection (S/N = 3) of the cations were in the range of 18-124 μg/l, the linear correlation coefficients were 0.9991-0.9998, and the RSD values of retention time and peak height were all smaller than 2.1%. The present analytical method was successfully applied to the rapid and direct determination of inorganic cations in samples of river water and commercial drinks, with satisfactory results.     

Influence of the cation size on the framework structures and space group centricities in AMo2O5(SeO3)2 (A = Sr, Pb, and Ba)

Two new quaternary mixed-metal selenites, SrMo(2)O(5)(SeO(3))(2) and PbMo(2)O(5)(SeO(3))(2), have been synthesized as crystals and pure polycrystalline phases by standard solid-state reactions using SrMoO(4), PbO, MoO(3), and SeO(2) as reagents. The crystal structures of the reported materials have been determined by single-crystal X-ray diffraction. SrMo(2)O(5)(SeO(3))(2) and PbMo(2)O(5)(SeO(3))(2) are isostructural and crystallized in the triclinic centrosymmetric space group P1? (No. 2). The reported materials exhibit chain structures consisting of MoO(6) octahedra and asymmetric SeO(3) polyhedra. Complete characterizations including IR spectroscopy and thermal analyses for the compounds are also presented, as are dipole moment calculations. In addition, the powder second-harmonic-generating (SHG) properties of noncentrosymmetric polar BaMo(2)O(5)(SeO(3))(2) have been measured using 1064 nm radiation. Through powder SHG measurement, we are able to determine that BaMo(2)O(5)(SeO(3))(2) has a SHG efficiency of approximately 80 times that of α-SiO(2). Additional SHG measurements reveal that the material is phase-matchable (type 1). A detailed cation size effect on the symmetry and framework structure is discussed.     

Catalytic enantioselective protonation of nitronates utilizing an organocatalyst chiral only at sulfur

The highly enantioselective protonation of nitronates formed upon the addition of α-substituted Meldrum's acids to terminally unsubstituted nitroalkenes is described. This work represents the first enantioselective catalytic addition of any type of nucleophile to this class of nitroalkenes. Moreover, for the successful implementation of this method, a new type of N-sulfinyl urea catalyst with chirality residing only at the sulfinyl group was developed, thereby enabling the incorporation of a diverse range of achiral diamine motifs. Finally, the Meldrum's acid addition products were readily converted to pharmaceutically relevant 3,5-disubstituted pyrrolidinones in high yield.     

Structural dynamics of 1,2-diiodoethane in cyclohexane probed by picosecond X-ray liquidography

We investigate the structural dynamics of iodine elimination reaction of 1,2-diiodoethane (C(2)H(4)I(2)) in cyclohexane by applying time-resolved X-ray liquidography (TRXL). The TRXL technique combines structural sensitivity of X-ray diffraction and 100 ps time resolution of X-ray pulses from synchrotron and allows direct probing of transient structure of reacting molecules. From the analysis of time-dependent X-ray solution scattering patterns using global fitting based on DFT calculation and MD simulation, we elucidate the kinetics and structure of transient intermediates resulting from photodissociation of C(2)H(4)I(2). In particular, the effect of solvent on the reaction kinetics and pathways is examined by comparison with an earlier TRXL study on the same reaction in methanol. In cyclohexane, the C(2)H(4)I radical intermediate undergoes two branched reaction pathways, formation of C(2)H(4)I-I isomer and direct dissociation into C(2)H(4) and I, while only isomer formation occurs in methanol. Also, the C(2)H(4)I-I isomer has a shorter lifetime in cyclohexane by an order of magnitude than in methanol. The difference in the reaction dynamics in the two solvents is accounted for by the difference in solvent polarity. In addition, we determine that the C(2)H(4)I radical has a bridged structure, not a classical structure, in cyclohexane.