Matrix separation of palladium and iridium by the cellulose anion exchanger Cellex T and the subsequent determination of palladium at theμg/g-level

The preconcentration and separation of palladium and iridium from base metals is studied with cellulose (Cellex T) and styrene-divinylbenzene (Varion AT 400) anion exchangers. In spite of lower capacity of Cellex T to chloride complexes of Pd and Ir, it allowed to get a higher preconcentration factor. Yields of 92–99% are achieved for Pd and 96–97% for Ir from the solutions containing great excess of base and heavy metals. Graphite furnace atomic absorption spectrometry is used for the final measurements. The procedure has been applied to the determination of palladium in natural samples.     

Cis-coordination of the chromate anions in helical Co/Ni block-type polymeric systems. Structural and spectroscopic characteristics of catena(μ-CrO4-O,O′)[Co(HIm)3H2O] and catena(μ-CrO4-O,O′)[Co0.43Ni0.57(HIm)3H2O]

Two polymeric complexes: catena(μ-CrO₄-O,O′)[Co(HIm)₃H₂O] (1) and catena(μ-CrO₄-O,O′)[Co_0.43Ni_0.57(HIm)₃H₂O] (2) (where HIm=imidazole) with a cis-bridging coordination mode of the CrO₄ ²⁻ anion have been synthesized and characterized by X-ray and spectroscopic methods. These crystals were isolated from nine systems of varying reagent molar ratios and three excluding anions: Cl⁻, NO₃ ⁻ and SO₄ ²⁻ exclusively as mer [M(HIm)₃O₃]-type isomers. The unit cell of these isostructural complexes (monoclinic crystal system P2₁ /n) contains two independent helixes, left- and right handed, stabilized by intrahelical and interhelical hydrogen bonding and π–π interaction between pairs of the imidazole rings from neighbouring helixes. The Raman spectra at 77 K of 1 and 2 deconvoluted into lorentzian components revealed the block-type polymeric structure of the complexes. Moreover, the solution studies at millimolar concentrations of 1 and 2 indicated their complete decomposition in water. Four K electronic spectral analysis of the crystals (band deconvolution into gaussian components) enhanced with the data obtained in the polarized light allowed for assignment of the bands to the respective d–d transition (D_4h symmetry). It was found that the metallic centres are independently absorbing species, which supports the suggestion of a block-type structure of the polymers. The respective crystal field parameters for Co and Ni were calculated.     

The first structurally characterized nonorganometallic titanium(III) alkoxo-bridged dinuclear complexes

The reaction of [Ti4(OMe)14Cl2] (1) with an excess of AlMe3 gave the cocrystallite [Ti2(mu-OMe)2(mu-Cl)Cl3(thf)3].[Ti2(mu-OMe)3Cl3(thf)3] (2.3) species in a 1:1 ratio. Similar to 2, [Ti2(mu-OEt)2(mu-Cl)Cl3-(thf)3] (4) was obtained in the reaction of an equimolar mixture of TiCl4 and Ti(OEt)4 with Al/AlMe3. The short distance [2.543(1)av A in 2.3 and 2.599(1) A in 4] between "Ti(+3)" atoms, their diamagnetism, and ELF analysis indicate the presence of a Ti-Ti bond.     

Multipeak distributions of first passage times in bistable dynamics in a model of a thermochemical system.

A master equation is used to study transitions between the stable limit cycle and stable focus in the two-variable bistable system. The distribution function of the mean first passage time between these attractors and the relative dispersion of the mean first return time from the stable focus to itself as a function of the intensity of fluctuations are calculated and discussed. A coherence resonance is observed for the return time from the focus to itself.     

A simplified integral equation for adsorption of gas mixtures on heterogeneous surfaces

Summary The multiple integral representing the overall isotherm for adsorption of gas mixtures on heterogeneous surfaces is transformed to a single integral, which is promising for predicting the mixed-gas adsorption by means of single-gas adsorption parameters. This transformation is possible when the adsorption energies of components for various adsorption sites show a certain type of correlation.

---

Eine vereinfachte Integralgleichung für die Adsorption von Gasmischungen auf heterogenen Oberflächen

Zusammenfassung Das multiple Integral, das die Adsorption von Gasmischungen auf heterogenen Oberflächen darstellt, wurde zu einem einfachen Integral transformiert, das zur Voraussage der Adsorption von Gasgemischen mittels der Einzelgas-Adsorptionsparameter geeignet sein sollte. Diese Transformation ist dann möglich, wenn die Adsorptionsenergien der Komponenten einem bestimmten Korrelationstyp angehören.

     

Studies of the soluble part of oxidised coals

Soluble products obtained from the oxidation of four types of coal, each characterised by different degree of coalification and different degree of sulphur content, are studied. The coals are oxidised with peracetic acid (PAA) and nitric acid. Analyses are performed by Atmospheric Pressure-Temperature Programmed Reduction (AP-TPR) and Fourier Transform Infrared Spectroscopy (FTIR). The soluble products contain much more sulphur than the insoluble products of oxidation. The products obtained from the reaction with HNO₃ contain higher amounts of inorganic sulphur compounds, while those obtained from the reaction with PAA are characterised by an increased content of organic sulphur species.     

Free-electron attachment to coronene and corannulene in the gas phase

Electron attachment to the polyaromatic hydrocarbons coronene and corannulene is studied in the electron energy range of about 0-14 eV using a high-resolution crossed electron-neutral beam setup. The major anions observed are the parent anions peaking at about 0 eV with cross sections of 3.8 x 10(-20) and 1 x 10(-19) m(2), respectively. The only fragment anions formed in coronene and corannulene are the dehydrogenated coronene and corannulene anions. Other anions observed in the negative mass spectra at about 0 eV can be ascribed to impurities of the sample. High-level quantum-mechanical studies are carried out for the determination of electron affinities, hydrogen binding energies, and structures of both molecules. The behavior of coronene and corannulene upon electron attachment is compared with that of other polyaromatic hydrocarbons studied previously.     

Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

X‐ray investigations of bicyclic α‐methylene‐δ‐valerolactones. V. (4aS,7R,8aR)‐7‐Isopropenyl‐4a‐methyl‐3‐methyleneperhydrochromen‐2‐one

The title compound, C₁₄H₂₀O₂, adopts a conformation in which the δ‐valerolactone and cyclohexane rings are almost coplanar with one another. The γ‐methyl substituent occupies an axial position with respect to the cyclohexane ring. The δ‐valerolactone moiety adopts an envelope arrangement, while the cyclohexane ring exists in a chair conformation.