Pb2+ Defects in perovskite-like KMgF3 crystals

Abstract

The physical properties of Pb²⁺ impurities in the perovskite-like lattice of KMgF₃ are very similar to those of (ns)² ions in alkali halides. The impurity inhomogeneous distribution leads to high dopant levels in the bottom region of the crystals, with a segregation coefficient equal to 0. 020. The optical features of the 336 nm emission support its attribution to luminescence of Pb²⁺ ions from the relaxed excited B state.     

Rapid and sensitive ultra‐high‐pressure liquid chromatography method for quantification of antichagasic benznidazole in plasma: application in a preclinical pharmacokinetic study

Benznidazole (BNZ) and nifurtimox are the only drugs available for treating Chagas disease. In this work, we validated a bioanalytical method for the quantification of BNZ in plasma aimed at improving sensitivity and time of analysis compared with the assays already published. Furthermore, we demonstrated the application of the method in a preclinical pharmacokinetic study after administration of a single oral dose of BNZ in Wistar rats. A Waters® Acquity UHPLC system equipped with a UV–vis detector was employed. The method was established using an Acquity® UHPLC HSS SB C₁₈ protected by an Acquity® UHPLC HSS SB C₁₈ VanGuard guard column and detection at 324 nm_. The mobile phase consisted of ultrapure water–acetonitrile (65:35), and elution was isocratic. The mobile phase flow rate was 0.55 mL/min, the volume of injection was 1 μL, and the run time was just 2 min. The samples were kept at 25°C until injection and the column at 45°C for the chromatographic separation. The sample preparation was performed by a rapid protein precipitation with acetonitrile. The linear concentration range was 0.15–20 µg/mL. The pharmacokinetic parameters of BNZ in rats were determined and the method was considered sensitive, fast and suitable for application in pharmacokinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of cellulose acetate from cellophane industry residues. Application as acetaminophen controlled-release membranes

Journal of Thermal Analysis and Calorimetry - Cellophane film production generates cellulosic residues from scraps, edges, and low-quality films. In this work, cellophane was used as a raw material...     

Electrochemical characterisation of a Zn/(PEO)4ZnCl2/Nb2O5 solid-state cell

The (PEO)₄ZnCl₂ electrolyte (PEO, polyethylene oxide) was studied in view of its potential application in a solid-state rechargeable zinc cell. The electrochemical stability window was established, and decomposition voltage values between 3.19 (20 °C) and 1.44 V (150 °C) were estimated. Cyclic voltammetry studies using a Pt/(PEO)₄ZnCl₂/Pt cell indicated reversibility of the Zn²⁺/Zn couple at the electrode/electrolyte interface. Laboratory cells Zn(−)/(PEO)₄ZnCl₂/Nb₂O₅(+) were assembled and studied at 55 °C, under various discharge current densities. Results of cell discharge profiles, capacity values, charge–discharge cycles and cell stabilities are reported.     

Assessment of dispersive liquid–liquid microextraction for the simultaneous extraction,preconcentration, and derivatization of Hg2+ and CH3Hg+ for further determination by GC–MS

This work reports the development of a dispersive liquid – liquid microextraction method for the simultaneous extraction, preconcentration, and derivatization of Hg²⁺ and CH₃Hg⁺ species from water samples for further determination by GC – MS. Some parameters of the proposed method, such as volume and type of disperser and extraction solvent, and Na[B(C₆H₅)₄] concentration were investigated using response surface methodology. Suitable recoveries were obtained using 80 μL C₂Cl₄ (as extraction solvent), 1000 μL ethanol (as disperser solvent), and 300 μL 2.1 mmol/L Na[B(C₆H₅)₄] (as derivatizing agent). Accuracy was evaluated in terms of recovery and ranged from 87 to 99% with RSD values <7%. In addition, a certified reference material of water (NIST 1641d) was analyzed and agreed with the certified value about 107% (for Hg²⁺), with RSD values <8.5%. LODs were 0.3 and 0.2 μg/L, with enrichment factors of 112 and 115 for Hg²⁺ and CH₃Hg⁺, respectively. The optimized method was applied for the determination of Hg²⁺ and CH₃Hg⁺ in tap, well, and lake water samples.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

Solid phase microextraction fills the gap in tissue sampling protocols

Metabolomics and biomarkers discovery are an integral part of bioanalysis. However, untargeted tissue analysis remains as the bottleneck of such studies due to the invasiveness of sample collection, as well as the laborious and time-consuming sample preparation protocols. In the current study, technology integrating in vivo sampling, sample preparation and global extraction of metabolites – solid phase microextraction was presented and evaluated during liver and lung transplantation in pig model. Sampling approaches, including selection of the probe, transportation, storage conditions and analyte coverage were discussed. The applicability of the method for metabolomics studies was demonstrated during lung transplantation experiments.     

From Levulinic Acid to Biheterocycles: Synthesis of 1-[(5-Hydroxy-5-trifluoromethyl-3-substituted-4,5-dihydro-1H-pyrazol-1-yl)-3-(5-trifluoromethyl-1H-pyrazol-3-yl)propan-1-ones

We develop an efficient method to synthesize novel propionyl-spaced bisheterocyclic compounds. It entails cyclocondensation of 3-(5-trifluoromethyl-1H-pyrazol-3-yl)propanoyl hydrazide obtained from levulinic acid, with 1,1,1-trifluoro-4-methoxy-3-alken-2-ones proceeding regiospecifically to 1-[(5-trifluoromethyl-5-hydroxy-3-substituted-4,5-dihydro-1H-pyrazol-1-yl)-3-(5-trifluoromethyl-1H-pyrazol-3-yl)propan-1-one derivatives.     

Synthesis,Crystal Structures,and in Silico Toxicity Prediction of Thienopyridine Phosphoramidates

New thieno[2,3-b]pyridine phosphoramidates compounds were synthesized and characterized by infrared; ¹H, ¹³C, and ³¹P NMR spectroscopy; and high-resolution mass spectrometry. The products were obtained in good yields (64–82%) under mild conditions by nucleophilic aromatic substitution reaction of aminoalkylphosphoramidates over 4-chlorothieno[2,3-b]pyridine-5-carbonitrile. The crystal structures of two compounds were solved by x-ray diffraction and showed a network of intermolecular interactions involving phosphoramidate groups. Druglike properties and toxicity of the new compounds were studied with the help of the software Molinspiration, Osiris, and Toxtree, and were compared with the standard drugs amphotericin B, miltefosine, benznidazole, and nifurtimox.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]