Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Development and Validation of a High-Performance Thin-Layer Chromatographic Method,with Densitometry,for Quantitative Analysis of Tizoxanide (a Metabolite of Nitazoxanide) in Human Plasma

JPC – Journal of Planar Chromatography – Modern TLC - A new simple, rapid, and selective high-performance thin-layer chromatographic (HPTLC) method with metronidazole as the internal...     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Study on the stability of noradrenaline and on the determination of its acidity constants

Noradrenaline is a catecholamine which has been largely recognised to play a very important role in biological systems. In view of the neurotransmitter's alleged importance, this work aimed at showing the influence of time on its spectral behaviour using different analytical methods and determining its acidity constants through spectrophotometric titration and by the so-called point-by-point analysis, where the samples are freshly prepared for each pH value investigated at the instant required. Because the catecholamines are light-sensitive and likely to react with the oxygen in the surrounding air, both methods used preclude its incidence onto the samples being analysed under the presence of a nitrogen atmosphere maintained over the solutions. The constants obtained through point-by-point analysis were log beta1 = 30.71+/-0.16, log beta2 = 22.00+/-0.15 and log beta3 = 11.69+/-0.16.     

Zur Kenntnis von Natrium-hexafluoromanganat(III)

Sodium hexafluoromanganate(III) has been synthesized by heating equimolecular quantities of Na₂MnF₅ and NaF in argon atmosphere. The compound is monoclinic witha=5.56 (1) Å,b=5.84 (1) Å,c=8.10 (2) Å, =90.7 (2) andZ=2. It is a high spin complex with _eff and the deformation of the octahedra is evident from its IR-spectra. Two enantiotropic transitions (at 562 and 653°C) and the melting point at 800°C have been observed.

---

---

8. Mitt.: Mh. Chem.106, 483 (1975).     

Substituted m-phenylene bridges as strong ferromagnetic couplers for Cu(II)-bridge-Cu(II) magnetic interactions: new perspectives

Based on a combined theoretical-experimental study, we propose that substituted m-phenylene ligands (m-N-Phi-N) can act as tuneable strong ferromagnetic couplers connecting Cu(II) ions; a new complex presenting that bridge with J close to +15 cm(-1) has been suggested and synthesized.     

Pretreatment of sugarcane bagasse hemicellulose hydrolysate for xylitol production byCandida guilliermondii

Applied Biochemistry and Biotechnology - In order to remove or reduce the concentrations of toxic substances present in the sugarcane bagasse hemicellulose hydrolysate for xyloseto-xylitol...     

Determination of propazine by differential pulse polarography in micellar and emulsified media

An electroanalytical study of the herbicide propazine's reduction process in micellar solutions and oil-in-water emulsions is reported. The anionic surfactant sodium pentanesulphonate was chosen as the most suitable. The differential pulse polarograms of micellar solutions had two reduction peaks below pH 2.0, whereas only one peak was obtained above pH 2.O. Ethyl acetate was chosen as the organic solvent to form propazine emulsions. Unlike in micellar solutions, the DPP polarograms of propazine emulsions showed only one peak even at pH < 2.0, suggesting that propazine hydrolysis was hindered in the emulsified medium. The limiting current is diffusion-controlled and the electrode process is irreversible. Propazine can be determined by differential pulse polarography over the 1.0 × 10^–1 – 1.0 × 10^–1moll^–1 and 1.0 × 10^–15 – 4.0 × 10^–1 moll^–1 concentration ranges and the limit of detection was 2.8 × 10^–1 moll^–1. Of the potential interferents simazine, methoprotryne and terbutryn (alls-triazines), thiram (a dithiocarbamate), dinoseb (nitrophenolic), and heptachlor (chlorinated cyclo-diene herbicide), only the first two were significant (10% error for equimolar concentrations). The method was applied to the determination of propazine in spiked drinking water. At a concentration level of 2.0 × 10^–1 moll^–1 a recovery of 94 ± 6% was obtained, after tenfold concentration on Sep-Pak.     

Electron transport in corona charged 12 μm teflon FEP with saturable deep traps

Surface-potential measurements carried out in negatively corona charged 12 m samples of fluorethylenepropylene (Teflon FEP) showed the following characteristics: 1) with a constant charging current, the potential initially rises linearly, and then sublinearly; 2) the potential saturates irrespectively of the charging process and 3) practically no potential decay is observed after switching off the corona. These results have been interpreted in terms of an usual model (field-independent trapping time) for charge transport in insulators, with saturable deep traps in both surface and bulk of the sample and a relatively high electron mobility in order to prevent free-space charge accumulation. The partial differential equations derived from the model are numerically solved and it was found that only the product of the mobility with the trapping time is relevant to the fitting of experimental results, provided that >10^–8 cm²/Vs. A field-dependent trapping time model leads to poorer fittings.