Two-photon four-level hologram recording in poly-(alkyl-α-cyanoacrylates)

We have investigated the suitability of poly-(alkyl--cyanoacrylates) (p-(alkyl-CAc)) for two-photon four-level holographic recording. It is shown that these materials follow indeed a two-photon four-level mechanism with the second absorption step in the near infrared. Light induces the polymerization of residual monomer in the matrix. The reaction is associated with positive density changes. The sensitivity ofp-(alkyl-CAc) depends strongly on composition and age of the sample. Maximum sensitivities achieved are comparable to the so far best-known two-photon four-level ir-sensitive systems.     

Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

Comparative studies of static dipole polarizabilities of ionic crystals on the basis of different self-consistent potentials

The static dipole polarizabilities, ^D , have been studied for the ions O^2–, F^–, Na⁺, Mg²⁺, Cl^–, K⁺ and Ca²⁺ in the crystals NaF, KF, NaCl, KC1, MgO and CaO. The starting zero-order wave functions have been generated using various exchange- and exchange-correlation potentials in order to study the effect of these potentials on ^D . The direct contribution to the dipole polarizability, _o ^D , has been determined by the uncoupled Hartree-Fock method. Self-consistency effects have been included by the geometric approximation. The crystal potential is incorporated using the Watson sphere model. Good agreement between theoretical and experimental results are found for those self-consistent potentials which exclude self-interaction.     

Highly efficient redox isomerization of allylic alcohols at ambient temperature catalyzed by novel ruthenium-cyclopentadienyl complexes--new insight into the mechanism

A range of ruthenium cyclopentadienyl (Cp) complexes have been prepared and used for isomerization of allylic alcohols to the corresponding saturated carbonyl compounds. Complexes bearing CO ligands show higher activity than those with PPh3 ligands. The isomerization rate is highly affected by the substituents on the Cp ring. Tetra(phenyl)methyl-substituted catalysts rapidly isomerize allylic alcohols under very mild reaction conditions (ambient temperature) with short reaction times. Substituted allylic alcohols have been isomerized by employing Ru-Cp complexes. A study of the isomerization catalyzed by [Ru(Ph5Cp)(CO)2H] (14) indicates that the isomerization catalyzed by ruthenium hydrides partly follows a different mechanism than that of ruthenium halides activated by KOtBu. Furthermore, the lack of ketone exchange when the isomerization was performed in the presence of an unsaturated ketone (1 equiv), different from that obtained by dehydrogenation of the starting allylic alcohol, supports a mechanism in which the isomerization takes place within the coordination sphere of the ruthenium catalyst.     

Biosynthesis of isoprenoids. purification and properties of IspG protein from Escherichia coli

[Structure: see text]. The IspG protein is known to catalyze the transformation of 2-C-methyl-d-erythritol 2,4-cyclodiphosphate into 1-hydroxy-2-methyl-2-(E)-butenyl 4-diphosphate in the nonmevalonate pathway of isoprenoid biosynthesis. We have found that the apparent IspG activity in the cell extracts of recombinant Escherichia coli cells as observed by a radiochemical assay can be enhanced severalfold by coexpression of the isc operon which is involved in the assembly of iron-sulfur clusters. The recombinant protein was isolated by affinity chromatography under anaerobic conditions. With a mixture of flavodoxin, flavodoxin reductase, and NADPH as the reducing agent, stringent assay methods based on photometry or on 13C NMR detection of multiply 13C-labeled substrate/product ratios afforded catalytic activities greater than 60 nmol mg(-1) min(-1) for the protein "as isolated" (i.e., without reconstitution of any kind). Lower apparent activities were found using photoreduced deazaflavin as an artifactual electron donor, whereas dithionite was unable to serve as an artificial electron donor. The apparent Michaelis constant for 2-C-methyl-D-erythritol 2,4-cyclodiphosphate was 700 microM. The enzyme was inactivated by EDTA and could be reactivated by Mn2+. The pH optimum was at 9.0. The protein contained 2.4 iron ions and 4.4 sulfide ions per subunit. The replacement of any of the three conserved cysteine residues afforded mutant proteins which were devoid of catalytic activity and contained less than 6% of Fe2+ and less than 23% of S2- as compared to the wild-type protein. Sequence comparison indicates that putative IspG proteins of plants, the apicomplexan protozoan Plasmodium falciparum, and bacteria from the Bacteroidetes/Chlorobi group contain an insert of about 170-320 amino acid residues as compared with eubacterial enzymes.     

A 50% n-octylmethyl, 50% diphenyl-polysiloxane as stationary phase with unique selectivity for gas chromatography

An n-octylmethyl, diphenyl-polysiloxane called SOP-50-Octyl was prepared by a condensation reaction of bis(dimethylamino) n-octylmethylsilane with diphenylsilanediol. The resulting copolymer was a gum with high molecular weight and was obtained with a yield of 80%. 1H and 29Si NMR spectroscopy revealed that the copolymer was a 52% octylmethyl, 48% diphenyl-polysiloxane with random microstructure. Small cyclic impurities could be almost quantitatively removed via a purification step. SOP-50-Octyl was used as stationary phase for the preparation of wall coated open tubular fused silica capillary columns for gas-liquid chromatography. The capillary columns exhibited high separation efficiency and high inertness. The stationary phase offered a unique selectivity due to its unique composition. The Rohrschneider-McReynolds constants indicated a low overall polarity in spite of the high phenyl content, as the polarity was distinctly decreased by the octyl substituent. Furthermore, the octyl substituent was responsible for a high column bleed, reducing the maximum allowable operating temperature to 280 degrees C. The elution temperatures of apolar compounds were increased due to increased interaction of the octyl substituent with the analytes. Some applications with volatile and semi-volatile organic compounds illustrate that SOP-50-Octyl is an excellent choice for confirmational analyses.     

Synthesis and Characterization of Optical Sol–Gel Adhesive for Military Protective Polycarbonate Resin

Sol–gel adhesive material for isostatic hotpressing lamination process was synthesized using 3-aminopropyltrimethoxysilane (APTES), 3-glycidyloxypropyltrimethoxysilane (GPTS) and methacryloxypropyltrimethoxysilane (MPTS) as precursors. Reaction dynamics between APTES and GPTS was followed on-line with Raman spectroscopy. The lamination process was optimized by varying hotpressing times and pressures at the constant temperature. Mechanical shear strength properties were found to be excellent for studied composition, 25–30 kg/cm² at its best. One possible application of laminated polycarbonate (PC) structure is a soldier helmet visor. Therefore, the ballistic protection properties were tested by shooting with 1.1 gram standard fragment, and determining the v₅₀ velocity value, which corresponds to 50% perforation. The laminated structure gave 5.7% better protection compared with the solid polycarbonate. The laminated components were found to have high optical transparency at the visible wavelengths as well as high environmental stability.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.     

Unprecedented hour-long residence time of a cation in a left-handed G-quadruplex

Cations are critical for the folding and assembly of nucleic acids. In G-quadruplex structures, cations can bind between stacked G-tetrads and coordinate with negatively charged guanine carbonyl oxygens. They usually exchange between binding sites and with the bulk in solution with time constants ranging from sub-millisecond to seconds. Here we report the first observation of extremely long-lived K⁺ and NH₄⁺ ions, with an exchange time constant on the order of an hour, when coordinated at the center of a left-handed G-quadruplex DNA. A single-base mutation, that switched one half of the structure from left- to right-handed conformation resulting in a right–left hybrid G-quadruplex, was shown to remove this long-lived behaviour of the central cation.

An extremely long-lived cation has been detected in left-handed G-quadruplexes.     

Progress in multi-ion counting spark-source mass spectrometry (MIC-SSMS) for the analysis of geological samples

Spark source mass spectrometry (SSMS) has experienced important and significant improvements in nearly all analytical features by the use of a multiple ion counting (MIC) system. Two procedures have recently been developed to further increase the analytical capabilities of MIC-SSMS in geochemistry. These are a mathematical correction of interferences, which is often necessary for the ultra trace element analysis of Nb, Ta, Zr, Hf and Y, and the development of an autospark system to hold the total ion beam constant. New analytical data for geological samples, especially international reference materials, are presented using the improved MIC-SSMS technique. The data set consists of high precision and low abundance data for Zr, Nb and Y in depleted reference materials. The MIC-SSMS results are compared with those of conventional SSMS using photoplates for ion detection. The precision of the MIC-SSMS isotope ratio measurements (about 1%) is more than a factor of 3 better than that of conventional SSMS, as demonstrated by analyses of Hawaiian samples. Total uncertainties of MIC-SSMS concentration data including all sources of error are generally between 2 and 5% for concentrations higher than about 0.3 microg/g and about 10% for trace element abundances in the ng/g range.