Dynamics of molybdenum nano structure formation on the TiO2(1 1 0) surface: A kinetic Monte Carlo approach

The rutile TiO₂(1 1 0) surface is a highly anisotropic surface exhibiting “channels” delimited by oxygen rows. In previous experimental and theoretical DFT works we could identify the molybdenum adsorption sites. They are located inside the channels. Moreover, experimental studies have shown that during subsequent annealing after deposition, special molybdenum nano structures can be formed, especially two monolayer high pyramidal chains of atoms.In order to better understand the dynamics of nano structure formation, we present a kinetic Monte Carlo study on diffusion and adsorption of molybdenum atoms on a TiO₂(1 1 0) surface. A quasi one-dimensional lattice gas model has been used which describes the possible adsorption sites of a Mo atom in a single channel of the surface. The atomic positions of a 1.5 monolayer thick Mo film formed of pyramidal chains define the lattice sites of the model. Thereby the formation of three-dimensional clusters could be studied. Here we have studied the cluster formation as a function of parameters that can be controlled in a growth experiment by physical vapor deposition: deposition and annealing temperature, flux and total amount of deposited Mo. Good qualitative agreement with recent experiments is obtained.     

Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

Dynamic response of permalloy/Cu/Co magnetoresistive sandwiches

The dynamic response of trilayer magnetoresistive permalloy/Cu/Co films was studied by high-frequency permeability spectra measurements. The resonance frequency is shown to depend on the interlayer copper thickness. This dependence is related to exchange coupling between permalloy and cobalt and the interaction field is estimated using the Landau–Lifschitz–Gilbert model.     

Si衬底上ZnSe外延膜的低压MOCVD生长

以硒化氢（H2Se）和二甲基锌为源材料，生长温度是300℃时，用低压金属有机化学气相沉积（LP－MOCVD）系统在Si(111)衬底上外延生长了ZnSe薄膜。通过X射线衍射（XRD）、扫描电子显微镜的能量色散（EDS）以及光致发光（PL）实验验证ZnSe外延膜的质量，在X射线衍射谱中只有一个强的ZnSe(111)面衍射峰，这说明外延膜是（111）取向的单晶薄膜，在能量色散谱中除了Si,Zn和Se原子外，没有观测到其他原子，说明ZnSe外延膜中杂质含量较少。ZnSe外延膜中Zn/Se原子比接近1，有较好的化学配比。在ZnSe外延膜的77K光致发光谱中没有观测到与深中心发射相关的发光峰，表明ZnSe外延膜的晶格缺陷密度较小。77K时的近带边发射峰447nm在室温时移至465nm附近。     

宽带Ⅱ-Ⅵ族半导体及其低维结构的生长和光学性质研究进展

本文系自1979年以来，宽带Ⅱ-Ⅵ族半导体研究组取得的主要研究成果的简要介绍。取得的主要研究成果可分为如下六个方面：第一，系统地研究了宽带Ⅱ-Ⅵ族半导体在电场激发下的自由激子发射；第二，创造性地提出并实 利用宽带Ⅱ-Ⅵ族超晶格的室温激子效应来实现在蓝绿区快响应的光学双稳的物理思想；第三，深入研究了宽带Ⅱ-Ⅵ族超晶格中的激子行为以及激子与元激发态的相互作用，为利用激子获得有效蓝色自发和受激发射提供物理基础和实验途径；第四，研究了ZnSe基非对称双量子阱和组合超晶格中激子的隧穿以及激子的自发和受激发射；第五，CdSe和ZnSeS自组装量子点的生长及其形成机理；第六，ZnO薄膜的生长及其紫外发射特性。     

Sensitivity of depolarized lidar signals to cloud and aerosol particle properties

Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer.     

On Characterizations of Proper Efficiency for Nonconvex Multiobjective Optimization

In this paper, nonconvex multiobjective optimization problems are studied. New characterizations of a properly efficient solution in the sense of Geoffrion's are established in terms of the stability of one scalar optimization problem and the existence of an exact penalty function of a scalar constrained program, respectively. One of the characterizations is applied to derive necessary conditions for a properly efficient control-parameter pair of a nonconvex multiobjective discrete optimal control problem with linear constraints.     

Temperature dependence of interband transition energy in InGaAsN strain-compensated quantum-well and ridge-waveguide lasers fabricated with pulsed anodic oxidation

Ridge-waveguide InGaAsN triple-quantum-well strain-compensated lasers grown by metal organic chemical vapor deposition were fabricated with pulsed anodic oxidation. The laser’s output power reached 145 mW in continuous-wave mode at room temperature for a 4-?m -stripe-width laser. Continuous-wave single longitudinal mode operation was maintained at a high injection current level with a wavelength of 1287.3 nm at room temperature. Single longitudinal mode operation at 1317.2 nm was achieved at twice the threshold current at 100 °C. The band gap of InGaAsN in the quantum wells at different temperatures was calculated and compared to the measured temperature-dependent laser wavelength.     

Current distribution and giant magnetoimpedance in composite wires with helical magnetic anisotropy

The giant magnetoimpedance effect in composite wires consisting of a non-magnetic inner core and soft magnetic shell is studied theoretically. It is assumed that the magnetic shell has a helical anisotropy. The current and field distributions in the composite wire are found by means of a simultaneous solution of Maxwell equations and the Landau–Lifshitz equation. The expressions for the diagonal and off-diagonal impedance are obtained for low and high frequencies. The dependences of the impedance on the anisotropy axis angle and the shell thickness are analyzed. Maximum field sensitivity is shown to correspond to the case of the circular anisotropy in the magnetic shell. It is demonstrated that the optimum shell thickness to obtain maximum impedance ratio is equal to the effective skin depth in the magnetic material.     

Magnetic,electrical transport and electron spin resonance studies of ferromagnetic insulating manganites Nd0.85Na0.15MnO3

We have investigated the magnetic, electrical transport and electron spin resonance (ESR) properties of polycrystalline Nd_0.85Na_0.15MnO₃ prepared by sol–gel method. A ferromagnetic–paramagnetic (FM–PM) transition is observed around 110 K, which is not accompanied by a metal–insulator transition. The sample displays the complete PM state associated with the ESR spectra fitted by single Lorentzian line shape above 130 K. Below 130 K, ESR spectra become distorted and then linewidth increases rapidly, where short-range magnetic order develops and coexists with PM phase due to the inhomogeneous magnetic state. In addition, the large difference between the activation energies obtained from the resistivity and ESR parameters (peak-to-peak linewidth and line intensity) at the frame of adiabatic small polaron hopping model is pointed out for Nd_0.85Na_0.15MnO₃.