探测超声微振动的激光外差干涉仪

激光超声是一项新兴的技术，可应用于非接触检测。本文作者研制的探测超声微振动的激光外差干涉仪，该装置具有结构简单，不必采用复杂的反馈回路，只要采用简单的滤波就可以消除外界环境引起的干扰，更重要的是它的测量结果与干涉仪的初相无关，为实际应用提供了很大方便。     

间接馈电的磁通量压缩发生器的参数选择

 从电路方程出发较详细地分析了间接馈电的磁通量压缩发生器的工作原理。分析表明：在设计间接馈电的磁通量压缩发生器时，只有馈电回路的电感L₁和电容C₀满足(L₁C₀)^1/2>>T时，MFCG才有效运行；耦合形式的MFCG能使初始磁通量放大；馈电回路电容大小的选择将影响MFCG输出的电流脉冲形状。这些结论对于设计磁通量压缩发生器具有指导意义。     

非线性介质F－P干涉仪光束输出特性的理论研究

本文对准直光束射入含有非线性介质的Ｆ－Ｐ干涉仪内的光场分布进行了研究．由于非线性介质与光的作用，从Ｆ－Ｐ干涉仪出射的光束截面上的相移随位置的改变呈一定的分布，进而引起了干涉仪的透射率和输出光束重新分布。当干涉仪两个面的反射系数较大时，输出光束截面出现光强和相移的跃变．这种现象与以前在平面波假设下所得的光强分布所得结论有较大的不同．     

Mbekhta's subspaces and a spectral theory of compact operators

Let be an operator on an infinite-dimensional complex Banach space. By means of Mbekhta's subspaces and , we give a spectral theory of compact operators. The main results are: Let be compact. . The following assertions are all equivalent: (1) 0 is an isolated point in the spectrum of (2) is closed; (3) is of finite dimension; (4) is closed; (5) is of finite dimension; . sufficient conditions for to be an isolated point in ; . sufficient and necessary conditions for to be a pole of the resolvent of .

     

Stimulated emission and multi-peaked absorption in a four level N-type atom

Absorption and refraction of the inner transition F₂\leftrightarrow F₃ of the closed four level N-type atom have been investigated under a weak field. The outer transitions F₁\leftrightarrow F₃ and F₂\leftrightarrow F₄ are resonantly interacted with drive field with frequency \omega_c and Rabi frequency \Omega_c, and saturation field with \Omega_s and \Omega_s, respectively. For the suitable Rabi frequencies \Omega_c and \Omega_s, we obtain the Mollow absorption spectrum of probe field. The reason is that the drive field excites the atom to the upper level F_c and simultaneously the saturation field takes the atom out of the lower level F₂, leading to the stimulated emission. Meanwhile, due to the dynamic energy splitting induced by the drive and saturation fields, the two- and four-peaked absorption spectra are observed. At the zero off-resonance detuning of probe field, we also find the transfer of dispersion from negative to positive with an increment of \Omega_s. Finally, the refractive index enhancement is predicted for a wide spectral region.     

Controlling optical responses through local dielectric resonance in nanometre metallic clusters

Optical responses in dilute composites are controlled through the local dielectric resonance of metallic clusters. We consider two located metallic clusters close to each other with admittances \varepsilon₁ and \varepsilon₂. Through varying the difference admittance ratio \eta [ = (\varepsilon₂- \varepsilon ₀) / (\varepsilon₁- \varepsilon₀)], we find that their optical responses are determined by the local resonance. There is a blueshift of absorption peaks with the increase of \eta. Simultaneously, it is known that the absorption peaks will be redshifted by enlarging the cluster size. By adjusting the nano-metallic cluster geometry, size and admittances, we can control the positions and intensities of absorption peaks effectively. We have also deduced the effective linear optical responses of three-component composites \varepsilon_e= \varepsilon₀ \bigl(1 + \sum_n=1^{n_s} [(\gamma_n2+ \eta \gamma_n2)/({\varepsilon₀(s - s_n))]} \bigr), and the sum rule of cross sections: \sum_n=1^{n_s} {(\gamma_n2+ \eta \gamma_n2 ) = N_h1+ N_h2, where N_h1and N_h2 are the numbers of \varepsilon₁ and \varepsilon₂ bonds along the electric field, respectively. These results may be beneficial to the study of surface plasmon resonances on a nanometre scale.     

System Identification Models of the Equivalent Permittivity for Rain Medium

The dielectric constant for rain medium is investigated by utilizing the system identification method. The rain rate model and frequency model of permittivity in millimeter waves band for rain medium are presented. The results obtained with models are in very good agreement with references in calculating the attenuation of electromagnetic waves induced by rain, which Shows that the obtained models are valid and practicable. The cross-polar discrimination gotten with rain rate model is in agreement with references.     

Improvement of the PLD process assisted by RF plasma for AlN growth

The pulsed-laser-deposition (PLD) method is particularly well suited for the growth of oxide thin films, but in the case of other compounds, such as nitrides, PLD presents some limitations which are mainly due to the low reactivity of nitrogen in comparison with oxygen. A possible way to overcome this problem is to increase the reactivity of the constituent species, via plasma assisted-pulsed-laser deposition. A plasma is coupled to the ablation chamber, in order to increase the density of reactive atomic species, which can be further incorporated in the growing film. This approach is described in this paper as well as the nature, energy, and concentration of the atomic and molecular species in the plasma as determined by various plasma diagnostics. These results are correlated to the growth of thin films in the particular case of the aluminum nitride compound. The composition and structure of the films are studied as a function of the growth conditions, and the positive effects of the additional discharge are evidenced on the film purity and properties. The fundamental problem with the PLD technique, especially with metallic targets, is the production of unwanted droplets that significantly worsen the properties of the films. To eliminate these droplets, a thin film has been grown with an experimental setup using two targets and crossed laser beams which gave positive results. PACS 81.15.Fg; 52.80.Pi; 77.84.Bw     

Estimation of temperature elevation generated by ultrasonic irradiation in biological tissues using the thermal wave method

In most previous models,simulation of the temperature generation in tissue is based on the Pennes bio-heat transfer equation,which implies an instantaneous thermal energy deposition in the medium.Due to the long thermal relaxation time τ(20 s-30 s) in biological tissues,the actual temperature elevation during clinical treatments could be different from the value predicted by the Pennes bioheat equation.The thermal wave model of bio-heat transfer(TWMBT) defines a thermal relaxation time to describe the tissue heating from ultrasound exposure.In this paper,COMSOL Multiphysics 3.5a,a finite element method software package,is used to simulate the temperature response in tissues based on Pennes and TWMBT equations.We further discuss different factors in the bio-heat transfer model on the influence of the temperature rising and it is found that the temperature response in tissue under ultrasound exposure is a rising process with a declining rate.The thermal relaxation time inhibits the temperature elevation at the beginning of ultrasonic heating.Besides,thermal relaxation in TWMBT leads to lower temperature estimation than that based on Pennes equation during the same period of time.The blood flow carrying heat dominates most to the decline of temperature rising rate and the influence increases with temperature rising.On the contrary,heat diffusion,which can be described by thermal conductivity,has little effect on the temperature rising.