Na填充型方钴矿化合物CoSb3的高压合成及电输运特性研究

 利用高压合成方法,在压力为2 GPa、温度为900 K的条件下,以NaN₃作为添加剂,成功地合成出了Na填充型的方钴矿化合物CoSb₃。X射线衍射（XRD）研究结果表明,当Na填充量达80%时,合成的Na填充型方钴矿化合物CoSb₃仍为单相方钴矿结构,没有Na和NaN₃等杂质峰。在室温下对不同Na填充量的样品进行了电阻率（ρ）和Seebeck系数（α）的测试,研究了不同Na填充量对样品电阻率、Seebeck系数和功率因子（α²σ）的影响。研究结果表明：室温下,样品的电导率随Na填充量的增加而增大,Seebeck系数的绝对值随Na填充量的增加而减小。当Na填充量为0.4时,样品获得了最高的功率因子（8.72 μW·cm^-1·K^-2）,此值高于He等报道的利用热压法制备的CoSb₃的值。填充量对样品电输运特性的影响规律与Pei等研究的K填充型CoSb₃的研究结果相一致。上述研究结果表明,高压合成技术有利于提高填充型方钴矿化合物的填充量,并有效地提高样品的电输运特性。     

Amperometric flow-injection method for the assay of l-ascorbic acid based on the photochemical reduction of Methylene Blue

Ascorbic acid (AA) is determined by amperometric detection based on the photochemical reduction of Methylene Blue (MB(+)) in 0.1 M phthalate buffer at pH 3.8. In this medium, MB(+) using flow-injection analysis. The carrier stream is 1 mM MB(+) is reduced quasi-reversibly at a glassy carbon electrode at -0.34 V vs. Ag/AgCl, while AA is oxidized irreversibly at about 0.3 V. The reactor is irradiated with a 500 W halogen lamp to facilitate the development of the photochemical reaction. A laboratory-built wall-jet electrode system was used. The Leucomethylene Blue formed in the reaction is detected at +0.050 V. At 2.2 ml min(-1) and using a sample loop of 43 mul, the method allows the determination of AA in the range 5.0-90.0 mug ml(-1), with a relative standard deviation of 1.3-4.8%, a detection limit of 1.9 mug ml(-1) and a sampling frequency of 45-50 h(-1).     

Energy-switching potential energy surface for the water molecule revisited: A highly accurate singled-sheeted form

A global ab initio potential energy surface is proposed for the water molecule by energy-switching/merging a highly accurate isotope-dependent local potential function reported by Polyansky et al. [Science 299, 539 (2003)] with a global form of the many-body expansion type suitably adapted to account explicitly for the dynamical correlation and parametrized from extensive accurate multireference configuration interaction energies extrapolated to the complete basis set limit. The new function mimics also the complicated Sigma/Pi crossing that arises at linear geometries of the water molecule.     

New universality classes in “Percolative” dynamics

We study a site analogue of directed percolation. Random trajectories are generated and their critical behavior is studied. The critical behavior corresponds to that of simple percolation in some of the parameter space, but elsewhere the exponents reveal new universality classes. As a byproduct, we use the model to make an improved estimate of the percolation hull exponents and to calculate the site percolation probability for the square lattice.     

Zero weights and non-zero slacks: Different solutions to the same problem

This paper re-assesses three independently developed approaches that are aimed at solving the problem of zero-weights or non-zero slacks in Data Envelopment Analysis (DEA). The methods are weights restricted, non-radial and extended facet DEA models. Weights restricted DEA models are dual to envelopment DEA models with restrictions on the dual variables (DEA weights) aimed at avoiding zero values for those weights; non-radial DEA models are envelopment models which avoid non-zero slacks in the input-output constraints. Finally, extended facet DEA models recognize that only projections on facets of full dimension correspond to well defined rates of substitution/transformation between all inputs/outputs which in turn correspond to non-zero weights in the multiplier version of the DEA model. We demonstrate how these methods are equivalent, not only in their aim but also in the solutions they yield. In addition, we show that the aforementioned methods modify the production frontier by extending existing facets or creating unobserved facets. Further we propose a new approach that uses weight restrictions to extend existing facets. This approach has some advantages in computational terms, because extended facet models normally make use of mixed integer programming models, which are computationally demanding.     

Theoretical and experimental study on metal(II) halide complexes of 1,3-bis(4-pyridyl)propane

We report the results of detailed experimental and theoretical studies on the molecular structure and vibrational spectra of metal(II) halide complexes of 1,3-bis(4-pyridyl)propane [M(N₂C₁₃H₁₄)X₂, where M represents Zn or Hg, and X represents Cl, Br, or I]. The FT–infrared spectra (FT-IR) and FT-Raman spectra of the metal complexes of the 1,3-bis(4-pyridyl)propane molecule in the powder form were recorded between the 400–4000 and 5–3500 cm^?1 regions, respectively. The molecular geometry and vibrational frequencies of the metal complexes of 1,3-bis(4-pyridyl)propane in the ground state were calculated using density functional theory (B3LYP functional) with LANL2DZ and SDD as basis sets. The total energy distributions (TED) among the symmetry coordinates of the normal modes were computed for the low-energy structure of the molecules. Complete vibrational assignments based on the calculated TED values are given.     

Accurate control of a liquid-crystal display to produce a homogenized Fourier transform for holographic memories

We show an accurate procedure to obtain a Fourier transform (FT) with no dc term using a commercial twisted-nematic liquid-crystal display. We focus on the application to holographic storage of binary data pages, where a drastic decrease of the dc term in the FT is highly desirable. Two different codification schemes are considered: binary pi radians phase modulation and hybrid ternary modulation. Any deviation in the values of the amplitude and phase shift generates the appearance of a strong dc term. Experimental results confirm that the calculated configurations provide a FT with no dc term, thus showing the effectiveness of the proposal.     

Electrically controlled liquid crystal fiber

We consider a cylindrical fiber whose core is a liquid crystal (LC) subject to the action of a low frequency field applied parallel to the axis of the cylinder and having initially the escaped configuration. We find the distorted textures of the nematic inside the cylinder by assuming arbitrary anchoring boundary conditions. In the optical limit we calculate the ray trajectories followed by a low intensity beam along the fiber parametrized by a low frequency electric field. Finally, we calculate exactly the spatial dependence of the transverse magnetic modes distribution in the guide, on the electric field, by using a numerical scheme. We summarize our paper and discuss our results.