Local Observation of Field Polarity Dependent Flux Pinning by Magnetic Dipoles

A scanning Hall probe microscope is used to study flux pinning in a thin superconducting Pb film covering a square array of single-domain Co dots with in-plane magnetization. We show that single flux quanta of opposite sign thread the superconducting film below T(c) at the opposite poles of these dipoles. Depending on the polarity of the applied field, flux lines are attracted to a specific pole of the dipoles, due to the direct interaction with the vortexlike structures induced by the local stray field.     

Aqueous laponite clay dispersions in the presence of poly(ethylene oxide) or poly(propylene oxide) oligomers and their triblock copolymers

The effect of polyethylene oxide (PEO) or polypropylene oxide (PPO) oligomers of various molecular weight (Mw) as well as of triblock copolymers, based on PEO and PPO blocks, on aqueous laponite RD suspensions was studied with small-angle neutron scattering (SANS). The radius of gyration (RG) increases for low M w whereas the opposite occurs for larger Mw. This behavior is explained on the basis that an effective R G is given by two contributions: (1) the size of the particles coated with the polymer and (2) the interactions between the laponite RD particles which are attractive for small and repulsive for large polymers. The SANS curves in the whole Q-range are well described by a model of noninteracting polydisperse core+shell disks, where the thickness of the polymer layer increases with the Mw. The adsorbed polymer is in a more compact conformation compared to a random coil distribution while the fraction of the polymer in the shell formed around the laponite RD particles is nearly independent of Mw. For increasing laponite RD amounts, at a given polymer composition, the thickness of the polymer slightly changes. In some cases, where also gelation is sped up, a structure factor with attractive interaction was employed which allowed to evaluate the attractive forces between the laponite RD particles. The gelation time was determined for mixtures at fixed copolymer and laponite RD concentrations. Surprisingly, it is observed that gels are formed despite the fact that the binding sites of the laponite RD particles are almost covered but the polymer size is too small to prevent aggregation. The gelation rate is correlated to structure and thermodynamics of these systems. Namely, when the balance between the steric forces and the depletion attractive forces undergoes an abrupt change the gelation time also undergoes a sharp variation. For lower and comparable Mw, PPO speeds up the gelation more efficiently than PEO while for higher Mw the gelation kinetics is slowed down again. Interestingly, copolymers of PEO and PPO blocks do not induce gelation in the time-window where the homopolymers do.     

Copolymer-cyclodextrin inclusion complexes in water and in the solid state. A physico-chemical study

The formation of inclusion complexes (ICs) composed of cyclodextrins (CDs) and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) (PEO-PPO-PEO) was studied. To this purpose, native and hydroxypropyl cyclodextrins with different cavity size were chosen. The PEO-PPO-PEO copolymers were selected to study the role of the molecular weight, keeping constant the hydrophilic/hydrophobic ratio, and the hydrophilicity. The volumetric studies at 25 degrees C allowed to determine the equilibrium constant and the volume change for the IC formation in water as well as the IC stoichiometry. Surface tension experiments evidenced that the copolymer and the CD interfacial behavior is controlled by the formation of ICs taking place in the bulk phase. It was proved that the differential scanning calorimetry (DSC) is a valid method to describe quantitatively the IC in the solid state. The combination of volumes, DSC and FTIR techniques together with the geometric information highlighted the following points: (1) the included copolymer is in the amorphous state; (2) the IC composed of native CDs adopts a channel structure with two EO units incorporated into one CD molecule; (3) the IC composed of hydroxypropyl-cyclodextrin is a polymeric structure like a necklace decorated with CD rings. Finally, TGA experiments showed that the thermal stability of the IC depends on the nature of both components.     

Aggregation Processes of Perylene Bisimide Diimidazolium Salts

The supramolecular aggregation of three diimidazolium‐functionalized perylene bisimides, differing in the alkyl chain length was investigated. These salts form aggregates in solvents like chloroform, dichloromethane, and glycerol. Solvent‐, concentration‐, and temperature‐dependent spectroscopic studies were carried out, evidencing the occurrence of an isodesmic, enthalpy‐driven aggregation process, underpinned by π–π stacking and hydrogen bonding. Moreover, dynamic light scattering (DLS) measurements and SEM images revealed that these salts aggregate in chloroform into elongated structures.     

Thermogravimetric analysis

Waterlogged archaeological woods (Pinus pinaster, Ulmus cf. minor and Fagus sylvatica L.) were consolidated by using Colophony, Rosin 100, and a mixture of Poly(ethylene) glycol (PEG) 3000 and Poly(propylene) glycol (PPG) 425. The efficiency of the consolidants was estimated by determining the content entrapped into the cavity of degraded wood. For this purpose, thermogravimetry was demonstrated to be a reliable tool. In the case that the polymeric mixture was used for impregnation, it was also possible to discriminate the amount of PEG 3000 from that of PPG 425 captured by the wood capillaries. Regardless of the wood nature, all the consolidants were present in treated samples in large amount (at least 70% w/w). Thermogravimetric results were in agreement with those calculated by using the wood degradation degree and composition of the consolidant mixture. One of the advantages of using this technique consists into requiring very small amounts (a few mg) of sample against the grams necessary for the conventional experiments.     

The solubilisation behaviour of some dichloroalkanes in aqueous solutions of PEO-PPO-PEO triblock copolymers: a dynamic light scattering, fluorescence spectroscopy, and SANS study

The aggregation behaviour of PEO-PPO-PEO triblock copolymers in water and in water + chlorinated additive mixtures was studied by means of fluorescence spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The copolymers were chosen such as to investigate the effects of molecular architecture (L35 and 10R5) and molecular weight by keeping constant the hydrophilic/hydrophobic balance (F88 and F108). 1,2-Dichloroethane was used as a prototype of water basins contaminants. The hydrodynamic radius of the block copolymer aggregates (R(h,M)) and the intensity ratio of pyrene of the first and the third vibrational band (I(1)/I(3)) were determined as a function of temperature (10-45 degrees C) and concentration. The copolymer architecture essentially does not affect R(h,M) in the entire range of temperature and concentration investigated. At a given temperature, increasing macromolecular size leads to a decrease of R(h,M). With rising temperature R(h,M) also decreases. According to the DLS results, the I(1)/I(3) change with temperature clearly detects the aggregation only for F88 and F108. The presence of 1,2-dichloroethane, at concentrations close to its solubility in water, does not lead to changes in the distribution of hydrodynamic radii for L35 and 10R5. Larger quantities of additive induce the formation of quite polydisperse mixed aggregates for L35 and of networks for 10R5. In the case of F88 and F108, low concentrations of additive lead to formation of mixed aggregates with smaller R(h,M). The SANS results corroborate the DLS and fluorescence findings proving enhancement of the copolymer aggregation through the presence of 1,2-dichloroethane. The DLS findings combined with those from the fluorescence spectroscopy provide some insight into the site of solubilisation of the additive in the aggregates.