An automated FTIR method for the routine quantitative determination of moisture in lubricants: An alternative to Karl Fischer titration

An accurate primary Fourier transform infrared (FTIR) method for the determination of moisture in mineral and ester based lubricants has been developed based on the extraction of moisture into dry acetonitrile. FTIR evaluation of acetonitrile extracts from new and used lubricants as well as common lubricant additives and contaminants which might co-extract indicated that phenolic constituents interfered significantly with moisture measurements. By measuring moisture at 3676 cm⁻¹ on the shoulder of the asymmetric OH stretching band, spectral interferences from extracted phenolic constituents were minimized. The spectra of calibration standards (0-2100 ppm), prepared by gravimetric addition of water to dry acetonitrile, were recorded in a 1000-μm CaF₂ transmission flow cell and produced linear standard curves having an S.D. of ∼±20 ppm. Lubricant sample preparation involved the vigorous shaking (20 min) of a 1:1.5 (w/v) mixture of lubricant and dry acetonitrile, centrifugation to separate the phases, acquisition of the FTIR spectrum of the upper acetonitrile layer, and subtraction of the spectrum of the dry acetonitrile used for extraction. A Continuous Oil Analyzer and Treatment (COAT^®) FTIR system was programmed to allow the automated analysis of acetonitrile extracts, and the methodology was validated by analyzing 58 new and used oils, independently analyzed by the Karl Fischer (KF) method. Linear regression of FTIR versus KF results for these oils produced a linear plot with a between-method S.D. of ±80 ppm. As implemented on the COAT^® system, this FTIR method is capable of analyzing 72 acetonitrile extracts/h and provides a high-speed alternative to the KF titrimetric procedures for the determination of water in lubricants.     

The effect of (natural) polyols on the initial colour of heavy metal- and zinc-free poly(vinyl chloride)

The propensity of (natural) polyols dispersed in heavy metal- and zinc-free PVC sheets to improve the initial colour, e.g. the colour during the first minutes of exposure to high processing temperatures (short-term stability), has been investigated. It is shown using W(Lab) values that the initial colour improves upon addition of polyols containing primary hydroxyl groups. The polyols act as HCl scavengers, presumably via an acid-catalysed S_N2 substitution of the primary hydroxyl groups by chloride ions. In contrast, polyols with only secondary or tertiary hydroxyl groups accelerate the thermal degradation of PVC. Notwithstanding, the efficacy of the (natural) polyols containing primary hydroxyl groups will be reduced if the polyol is susceptible to competitive acid-catalysed intramolecular cyclodehydration reactions under the processing conditions. This is substantiated by a comparison of the behaviour of mannitol and 3,4-di-O-methyl-d-mannitol. The methylated derivative, which is less prone to undergo intramolecular cyclodehydration, improves the initial colour of heavy metal- and zinc-free PVC sheets more significantly than mannitol itself.     

Oxidation of some catecholamines by sodium N-chloro-p-toluenesulfonamide in acid medium: A kinetic and mechanistic approach

The kinetics of the oxidation of five catecholamines viz., dopamine (A), L-dopa (B), methyldopa (C), epinephrine (D) and norepinephrine (E) by sodium N-chloro-p-toluenesulfonamide or chloramine-T (CAT) in presence of HClO₄ was studied at 30±0.1 °C. The five reactions followed identical kinetics with a first-order dependence on [CAT] _o , fractional-order in [substrate] _o , and inverse fractional-order in [H⁺]. Under comparable experimental conditions, the rate of oxidation of catecholamines increases in the order D>E>A>B>C. The variation of ionic strength of the medium and the addition of p-toluenesulfonamide or halide ions had no significant effect on the reaction rate. The rate increased with decreasing dielectric constant of the medium. The solvent isotope effect was studied using D₂O. A Michaelis-Menten type mechanism has been suggested to explain the results. Equilibrium and decomposition constants for CAT-catecholamine complexes have been evaluated. CH₃C₆H₄SO₂NHCl of the oxidant has been postulated as the reactive oxidizing species and oxidation products were identified. An isokinetic relationship is observed with β=361 K, indicating that enthalpy factors control the reaction rate. The mechanism proposed and the derived rate law are consistent with the observed kinetics.     

Spectroscopy and quantum chemical modeling reveal a predominant contribution of excitonic interactions to the bathochromic shift in alpha-crustacyanin, the blue carotenoprotein in the carapace of the lobster Homarus gammarus

To resolve the molecular basis of the coloration mechanism of alpha-crustacyanin, we used (13)C-labeled astaxanthins as chromophores for solid-state (13)C NMR and resonance Raman spectroscopy of [6,6',7,7']-(13)C(4) alpha-crustacyanin and [8,8',9,9',10,10',11,11',20,20']-(13)C(10) alpha-crustacyanin. We complement the experimental data with time-dependent density functional theory calculations on several models based on the structural information available for beta-crustacyanin. The data rule out major changes and strong polarization effects in the ground-state electron density of astaxanthin upon binding to the protein. Conformational changes in the chromophore and hydrogen-bond interactions between the astaxanthin and the protein can account only for about one-third of the total bathochromic shift in alpha-crustacyanin. The exciton coupling due to the proximity of two astaxanthin chromophores is found to be large, suggesting that aggregation effects in the protein represent the primary source of the color change.     

Characterization of low-energy chlorophylls in the PSI-LHCI supercomplex from Chlamydomonas reinhardtii. A site-selective fluorescence study

Almost all photosystem I (PSI) complexes from oxygenic photosynthetic organisms contain chlorophylls that absorb at longer wavelength than that of the primary electron donor P700. We demonstrate here that the low-energy pool of chlorophylls in the PSI-LHCI complex from the green alga Chlamydomonas reinhardtii, containing five to six pigments, is significantly blue-shifted (A(max) at 700 nm at 4 K) compared to that in the PSI core preparations from several species of cyanobacteria and in PSI-LHCI particles from higher plants. This makes them almost isoenergetic with the primary donor. However, they keep the other characteristic features of "red" chlorophylls: clear spectral separation from the bulk chlorophylls, big Stokes shift revealing pronounced electron-phonon coupling, and large homogeneous and inhomogeneous broadening of approximately 170 and approximately 310 cm(-1), respectively.     

Site-selective labeling strategies for screening by NMR

NMR based screening has become an important tool in the pharmaceutical industry. Methods that provide information on the location of small molecule binding sites on the surface of a drug target (e. g. SAR-by-NMR and related techniques) are of particular interest. In order to extend the applicability of such techniques to drug targets of higher molecular weight, selective labeling strategies may be employed. Dual-amino acid selective labeling and site directed non-native amino acid replacement (SNAAR) allow for the selective detection of NMR resonances of a specific amino acid residue. This results in significantly reduced spectral complexity, which not only enables application to higher molecular weight systems, but also eliminates the need for sequential resonance assignment in order to identify the binding site. Regio-selective (or segmental) labeling of an entire protein domain of a multi domain protein may also be achieved. Labeling only a selected part of a multi domain protein (e. g. a catalytic or ligand binding domain) is an attractive way to simplify the spectral interpretation without disturbing the system under study.     

Preparation,Solid‐state Characteristics,and Catalytic Properties of Promoted Vanadium Phosphate Materials

The syntheses of transition metal promoted (M = Co, Cr, Fe, Mo) supported vanadium phosphate (VPO) catalysts (TiO₂ (anatase), γ‐Al₂O₃) and their characterization by N₂‐adsorption, X‐ray diffractometry (XRD), FTIR‐spectroscopy and determination of V‐valence state is reported. The catalytic properties were checked in the heterogeneous catalytic ammoxidation of 2, 6‐dichlorotoluene to the corresponding nitrile. The catalyst samples were prepared by synthesis of the precursor compound VOHPO₄ · 0.5 H₂O, impregnation using various metal salt solutions and mixing with the support materials. The characterization revealed increased surface areas for all the promoted samples in comparison to the basic materials. XRD showed the formation of (VO)₂P₂O₇ after calcinations as well as patterns of support materials (anatase, γ‐Al₂O₃). The formation of crystalline proportions of mixed oxides were not observed. The catalytic ammoxidation runs revealed a significant effect of the promoter metals on the catalytic properties by an increase of yield by ca. 20 % compared to bulk VPO. Almost complete conversion of 2, 6‐dichlorotoluene and 81 % yield of nitrile were observed using a 25 %VPCoO/γ‐Al₂O₃ catalyst.     

Artificial intelligence for the interpretation of combined spectral data : Design and development of a spectrum interpreter

The design of a knowledge-based system for the interpretation of combined spectral data for structure elucidation (EXSPEC) is described. Some basic design features are discussed and the functioning of the knowledge base, inference mechanism and user-interface is outlined. Attention is focussed on the development of a spectrum interpreter for infrared and mass spectral data. Interpretation of spectra for 120 liquid alcohols used for rule generation was successful. The system can be run on a Macintosh II or, more slowly, on a Macintosh Plus.     

Sub-solidus Relations in the System KF—PbF2 to high Pressures

The phase β-K_0.25Pb_0.75F_1.75 previously found in the KF-PbF₂ system appears to be metastable at low temperatures relative to a mixture of orthorhombic PbF₂ and a new phase suspected to be KPbF₃ II. KPbF₃ II transforms to KPbF₃ I at 298.5°C at atmospheric pressure. The KPbF₃ II/I transition line rises with pressure, but the substance appears to reversibly disproportionate above ～360°C, 5 kbar, possibly to a mixture of PbF₂ and K₄PbF₆. Instead of β-K_0.25Pb_0.75F_1.75, a mixture with this composition yielded, in addition to weak heat events due to the KPbF₃ II/I transition, strong heat events at 254.5°C and atmospheric pressure (thermal hysteresis ～13°C) which were ascribed to the PbF₂ orthorhombic/cubic transition. This transition rises with pressure to 673°C at 37.8 kbar.     

Chemically induced dynamic nuclear polarization. Decarboxylation of photochemically generated benzoyloxy radicals

CIDNP has been studied during thermal decomposition, photolysis, and sensitized photolysis of benzoyl chloroacetyl peroxide. The ratio of the CIDNP intensities for the recombination products benzyl chloride and chloromethyl benzoate is dependent on the mode of decomposition, reflecting the extent of rapid decarboxylation of the primary formed benzoyloxy radicals.