Dispersion of nano-silicon carbide (SiC) powder in aqueous suspensions

The dispersion characteristics of nanosize silicon carbide (SiC) suspension were investigated in terms of surface charge, particle size, rheological measurement and adsorption study. Ammonium polycarboxylate has been used as dispersant to stabilize the suspension. It was found that the isoelectric point (iep) of SiC powder was pH_iep (4.9). The surface charge of powder changed significantly in presence of the ammonium polycarboxylate dispersant and iep shifted significantly towards lower acidic pH (3.6). The shift in iep has been quantified in terms of ΔG ⁰ _SP, the specific free energy of adsorption between the surface sites and the adsorbing polyelectrolyte (APC). The values of ΔG ⁰ _SP (−10.85 RT unit) estimated by the electro kinetic data compare well with those obtained from adsorption isotherms (−9.521 RT unit). The experimentally determined optimum concentration of dispersant required for maximizing the dispersion was found to be 2.4 mg/g of SiC (corresponding to an adsorbed amount of 1.10 mg/g), at pH 7.5. This is much below the full monolayer coverage (corresponding to adsorbed amount of 1.75 mg/g) of the particles surface by the dispersant. The surface charge quantity, rheological, pH, electro kinetic and adsorption isotherm results were used to explain and correlate the stability of the nanosize silicon carbide in aqueous media. At pH 7.5, where both SiC surface and APC are negatively charged, the adsorption of APC was low because of limited availability of favourable adsorption sites. In addition, the brush-like configuration of the adsorbed polymer prevented close approach of any additional dispersant; hence stabilization of the slurry happens at a comparatively lower concentration than the monolayer coverage.     

Synthesis,structure and antibacterial activity of manganese(III) complexes of a Schiff base derived from furfurylamine

Two new mononuclear complexes of manganese(III) viz. [MnL₂(LH)₂]ClO₄ (1) and [MnL₂(N₃)]·0.5CH₃OH (2) have been synthesized by reacting manganese perchlorate with furfurylamine and salicylaldehyde (plus sodium azide in 2) where L = (2-hydroxybenzyl-2-furylmethyl)imine, an asymmetric bidentate Schiff base formed in situ to bind the Mn(III) ion. The complexes have been characterized by elemental analysis, IR spectroscopy, TGA and single crystal X-ray diffraction studies. Structural studies reveal that the complexes 1 and 2 adopt an octahedral and a square pyramidal geometry, respectively. The antibacterial activity of the complexes has been tested against Gram(+) and Gram(?) bacteria.     

Growth of carbon nanotubes from waste blast furnace gases at atmospheric pressure

Carbon emissions from industrial sources are of major global concern, especially contributions from the steel manufacturing process which accounts for the majority of emissions. Typical blast furnace gases consist of CO₂ (20‐25%), CO (20‐25%), H₂ (3‐5%) and N₂ (40‐50%) and trace amounts of other gases. It is demonstrated that gas mixtures with these compositions can be used at atmospheric pressure to grow carbon nanotubes (CNTs) by chemical vapor deposition (CVD) on to steel substrates, which act as catalysts for CNT growth. Computational modelling was used to investigate the CNT growth conditions inside the CVD chamber. The results show that industrial waste pollutant gases can be used to manufacture materials with significant commercial value, in this case CNTs.     

Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr0.25Ti0.75]O3 ceramic

In this work, we report the Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr_0.25Ti_0.75]O₃ ceramic synthesized by solid state reaction. This ceramic was characterized by X-ray diffraction, Rietveld refinement, scanning electron microscopy and energy dispersive X-ray spectrometry. Impedance spectroscopy analyses reveals a non-Debye relaxation phenomenon being its relaxation frequency moving toward to positive side with increase of temperature. A significant shift in impedance loss peaks toward higher frequency side indicates conduction in material and favoring the long range motion of mobile charge carriers. The frequency dependent ac conductivity at different temperatures indicates that the conduction process is thermally activated. The variation of dc conductivity exhibited a negative temperature coefficient of resistance behavior. The ac conductivity data are used to evaluate the density of states at Fermi level and activation energy of this ceramic. The dc electrical and thermal conductivities of grain and grain boundary have been discussed.     

Cu(II) catalyzed imine C-H functionalization leading to synthesis of 2,5-substituted 1,3,4-oxadiazoles

A direct access to symmetrical and unsymmetrical 2,5-disubstituted [1,3,4]-oxadiazoles has been accomplished through an imine C-H functionalization of N-arylidenearoylhydrazide using a catalytic quantity of Cu(OTf)(2). This is the first example of amidic oxygen functioning as a nucleophile in a Cu-catalyzed oxidative coupling of an imine C-H bond. These reactions can be performed in air atmosphere and moisture making it exceptionally practical for application in organic synthesis.     

Post-sintering annealing effect on the diffuse phase transition in (Pb1−xBax)(Yb0.5Ta0.5)O3 ceramics

The effect of post sintering annealing on the dielectric response of (Pb_1−xBa_x)(Yb_0.5Ta_0.5)O₃ ceramics in the diffuse phase transition range (x=0.2) has been investigated. The samples are prepared by conventional solid-state reaction method. The samples are sintered at 1300 °C for 2 h and annealed at different temperatures (800, 900 and 1000 °C) for 8 h and at 800 °C for different time durations (8, 12 and 24 h). A significant change in the dielectric response has been observed in all the samples. The dielectric constant increases remarkably and the dielectric loss tangent decreases. The dielectric peaks of the annealed samples are observed to be more diffused with noticeable frequency dispersion compared to the as sintered sample.     

Substituent effects in polymerization reactions in terms of generalized substituent constants F and R and generalized weighting factors f and r

In this investigation an approach to correlate the composite rate constants of some redox polymerization reactions [acrylonitrile-Ce(IV)-organic substrate] with a new type of multiparameter equation is described. The multiparameter equation is based on Swain and Lupton's F and R, the field and resonance components of the substituents, respectively, and the unique positional weighting factors f and r suggested by Williams and Norrington. The statistical parameters of the correlation involving the substituent constants (fF and rR) and the rate data have been found to be quite satisfactory, the average coefficient of determination being 0.91. The significance levels of the correlation also indicate that the present model is applicable to the kinetics of redox polymerization. The sign and magnitude of the reaction-dependent regression constants α and β suggest that three different types of reaction mechanisms are operative for the substrates benzaldehyde, phenylthiourea, acetophenone, and toluene.     

Anisotropic electrical properties of Bi0.5(Na0.75K0.25)0.5TiO3 ceramics fabricated by reactive templated grain growth (RTGG)

We have fabricated lead-free Bi_0.5(Na_0.75K_0.25)_0.5TiO₃ (BNKT) ceramics by a conventional process (CP) and reactive templated grain growth (RTGG) methods. The effect of grain orientation on structure, dielectric, complex impedance and electrical properties was investigated. The phase formation and grain morphology of BNKT ceramics were examined by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. High dielectric constant and low dielectric loss was observed for grain oriented (textured) BNKT ceramics. Complex impedance, temperature dependent ac and dc conductivity were performed to explore the conduction behavior of the prepared BNKT ceramics.     

Low threshold field electron emission from solvothermally synthesized WO2.72 nanowires

Field emission studies of WO_2.72 nanowires synthesized by a solvothermal method have been performed in the planar diode configuration under ultra high vacuum conditions. Fowler–Nordheim plots obtained from the current-voltage characteristics follow the quantum mechanical tunneling process and a current density of ∼8.3×10⁶ μA/cm² can be drawn at an applied electric field of 2 V/μm. The field enhancement factor is 33025, while the turn-on field is only 1.4 V/μm. The emission current-time plot recorded at the pre-set value of emission current of 1 μA over a period of more than 3 h exhibits an initial increase and a subsequent stabilization of the emission current. The results reveal that the WO_2.72 nanowire emitters synthesized by the solvothermal method are promising cathode materials for practical applications.