Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

Solving the 3-SAT problem based on DNA computing

The 3-SAT problem is an NP-complete problem, and many algorithms based on DNA computing have been proposed for solving it since Adleman's pioneering work. This paper presents a new algorithm based on the literal string strategy proposed by Sakamoto et al. Simulation results show that the maximal number of literal strings produced during the computing process is greatly reduced. Moreover, the length of the literal strings is also reduced from m to n at most.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

二甲醚反应化学的研究进展

随着GTL(Gas-to-Liquid)技术的发展,从煤炭或天然气经由合成气制备甲醇的反应过程已转向合成二甲醚的反应过程,最近的研究表明由合成气直接生产二甲醚能突破甲醇合成的热力学限制,实现单程的完全转化[1],其中煤基合成气一步法合成二甲醚较甲醇更具技术和经济优势.从物理性质看,     

Enantiomer separation of a novel aminothiazolecarboxamide fungicide using polysaccharide-derived chiral stationary phases

The direct enantioseparation of a novel aminothiazolecarboxamide fungicide, ethaboxam, on polysaccharide-derived chiral stationary phases (CSPs) is described. Good resolution is achieved with several polysaccharide-derived CSPs. Chiralcel OD (OD-H) and Chiralpak AS are excellent for direct enantiomer separation of ethaboxam. The elution behavior and the effects of eluent composition on the resolution of ethaboxam are also investigated. Furthermore, the mechanism for chiral recognition using molecular mechanics is discussed.     

Carbohydrate chips for studying high-throughput carbohydrate-protein interactions

Carbohydrate-protein interactions play important biological roles in living organisms. For the most part, biophysical and biochemical methods have been used for studying these biomolecular interactions. Less attention has been given to the development of high-throughput methods to elucidate recognition events between carbohydrates and proteins. In the current effort to develop a novel high-throughput tool for monitoring carbohydrate-protein interactions, we prepared carbohydrate microarrays by immobilizing maleimide-linked carbohydrates on thiol-derivatized glass slides and carried out lectin binding experiments by using these microarrays. The results showed that carbohydrates with different structural features selectively bound to the corresponding lectins with relative binding affinities that correlated with those obtained from solution-based assays. In addition, binding affinities of lectins to carbohydrates were also quantitatively analyzed by determining IC(50) values of soluble carbohydrates with the carbohydrate microarrays. To fabricate carbohydrate chips that contained more diverse carbohydrate probes, solution-phase parallel and enzymatic glycosylations were performed. Three model disaccharides were in parallel synthesized in solution-phase and used as carbohydrate probes for the fabrication of carbohydrate chips. Three enzymatic glycosylations on glass slides were consecutively performed to generate carbohydrate microarrays that contained the complex oligosaccharide, sialyl Le(x). Overall, these works demonstrated that carbohydrate chips could be efficiently prepared by covalent immobilization of maleimide-linked carbohydrates on the thiol-coated glass slides and applied for the high-throughput analyses of carbohydrate-protein interactions.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

A three-component coupling process based on vicarious nucleophilic substitution (VNS(AR))-alkylation reactions: an approach to indoprofen and derivatives.

The intermediate anion derived from the vicarious nucleophilic substitution (VNS) of hydrogen reacts with a series of alkyl halides to generate the corresponding alpha-alkylated conventional VNS product in a one-pot process. This one-pot VNS-alkylation reaction offers a convenient route to a range alpha-substituted nitrobenzyl phosphine oxides, sulfones, and esters via a three-component coupling reaction. Reactions of alpha-chloroethyl phenyl sulfone (14) and ethyl 2-chloropropionate (16) with nitrobenzene followed by subsequent addition of an alkylating agent give a series of sulfones and esters bearing an alpha-aryl quaternary center. The VNS-alkylation protocol has been applied to the synthesis of derivatives of Indoprofen from nitrobenzene using readily available inexpensive starting materials. Indoprofen itself was prepared using the conventional VNS reaction in four steps and 24% overall yield from nitrobenzene.     

Zeolite-mediated photochemical charge separation using a surface-entrapped ruthenium-polypyridyl complex

Employing the strategy of quaternization of the 2,2' N atoms of the conjugated bipyridine ligand 1,4-bis[2-(4'-methyl-2,2'-bipyrid-4-yl)ethenyl]benzene (L), a polypyridyl complex of ruthenium(II) was tethered on the surface of zeolite Y. Electrochemical and spectroscopic properties of the complex suggest that, upon visible photoexcitation of the MLCT band, the electron is localized on the conjugated ligand rather than the bipyridines. Electron transfer from the surface complex to bipyridinium ions (methyl viologen) within the zeolite was observed. Visible light photolysis of the ruthenium-zeolite solid ion-exchanged with diquat and suspended in a propyl viologen sulfonate solution led to permanent formation of the blue propyl viologen sulfonate radical ion in solution. The model that is proposed involves intrazeolitic charge transfer to ion-exchanged diquat followed by interfacial (zeolite to solution) electron transfer to propyl viologen sulfonate in solution. Because of the slow intramolecular back-electron-transfer reaction and the forward electron propagation via the ion-exchanged diquat, Ru(III) is formed. This Ru(III) complex formed on the zeolite is proposed to react rapidly with water in the presence of light, followed by reaction with the propyl viologen sulfonate, to form pyridones and regeneration of Ru(II), which then continues the photochemical process.