The Solubility of the Chloromethanes in Water

Summary.  There are more than 150 papers that report on the solubility of the four chloromethanes in water. Volume 62 of the Solubility Data Series compiles and evaluates the papers concerned with the liquid–liquid solubility of the chloromethanes with water. A similar evaluation has not been carried out for the vapor–liquid solubility at a partial pressure up to the saturation vapor pressure of the four chloromethanes. This paper uses the liquid–liquid evaluated solubility values to calculate vapor–liquid Henry’s constants. They are compared with a compilation of Henry’s constants with good agreements between the calculated constants and the median of the compiled constants. It is believed that the calculated constants are a reliable set of values to use for the vapor–liquid solubility of the chloromethanes in water. E-mail: hlclever@worldnet.att.net Received October 11, 2002; accepted October 22, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Quantum hair and quantum gravity

A black hole may carry quantum numbers that arenot associated with massless gauge fields, contrary to the spirit of the no-hair theorems. The quantum hair is invisible in the classical limit, but measurable via quantum interference experiments. Quantum hair alters the temperature of the radiation emitted by a black hole. It also induces non-zero expectation values for fields outside the event horizon; these expectation values are non-perturbative in , and decay exponentially far from the hole. The existence of quantum hair demonstrates that a black hole can have an intricate quantum-mechanical structure that is completely missed by standard semiclassical theory.Based on an essay which received second award from the Gravity Research Foundation, 1991     

Studies on the mechanism of 1,2-dihydropyrazin-2-one ring formation from dipeptidyl chloromethyl ketone and its chemical properties: immediate deamination during catalytic hydrogenation

1,2-Dihydropyrazin-2-one derivatives, which have two aminoalkyl groups at the positions 3 and 6, were found to be efficient tools for the construction of potent, selective and long-acting opioid mimetics. During the course of preparation, we found that the catalytic hydrogenation of 3,6-bis(benzyloxycarbonylaminomethyl)-5-methyl-1,2-dihydropyrazin-2-one to remove the benzyloxycarbonyl groups resulted in a side reaction. By MS and NMR studies and by preparation of additional 1,2-dihydropyrazin-2-one derivatives, the structure of the by-product was identified as 3-aminomethyl-5,6-dimethyl-1,2-dihydropyrazin-2-one. Preparation of additional compounds substituted with deuterium provided us with sufficient information to confirm the structure of the product and to support a cyclization mechanism in its formation.     

Synthesis and Characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)]: A Heterobimetallaborane Analogue of nido-[B(4)H(7)](-)

The synthesis and characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)] (1) is reported. 1 is formed in low yield as a degradation product from the reaction between [{&mgr;-Fe(CO)(4)}B(6)H(9)](-) and trans-Ir(CO)Cl(PPh(3))(2) in THF and is characterized from NMR, IR, and analytical data and by a single-crystal X-ray diffraction study. 1 crystallizes in the monoclinic space group P2(1)/n with a = 12.8622(12), b = 14.3313(12), c = 23.579(3) ?, beta = 97.12(2) degrees, Z = 4, V = 4257.0(8) ?(3), R(1) = 4.83%, and wR(2)()(F(2)) = 12.43%. The heterobimetallaborane structure may be viewed as a derivative of the binary boron hydride nido-[B(4)H(7)](-) and is related to the known homobimetallatetraborane analogues [Fe(2)(CO)(6)B(2)H(6)] and [Co(2)(CO)(6)B(2)H(4)]. 1 exhibits proton fluxionality in its (1)H NMR spectrum, which is related to that found in the latter two compounds.     

Copper(II) complexes of pyridyl-appended diazacycloalkanes: synthesis, characterization, and application to catalytic olefin aziridination

As part of an ongoing effort to rationally design new copper catalysts for olefin aziridination, a family of copper(II) complexes derived from new tetradentate macrocyclic ligands are synthesized, characterized both in the solid state and in solution, and screened for catalytic nitrene transfer reactivity with a representative set of olefins. The pyridylmethyl-appended diazacycloalkane ligands L6(py)2, L7(py)2, and L8(py)2 are prepared by alkylation of the appropriate diazacycloalkane (piperazine, homopiperazine, or diazacyclooctane) with picolyl chloride in the presence of triethylamine. The ligands are metalated with Cu(ClO4)(2).6H2O to provide the complexes [(L6(py)2)Cu(OClO3)]ClO4 (1), [(L7(py)2)Cu(OClO3)]ClO4 (2), and [(L8(py)2)Cu](ClO4)2 (3), which, after metathesis with NH4PF6 in CH3CN, afford [(L6(py)2)Cu(CH3CN)](PF6)2 (4), [(L7(py)2)Cu(CH3CN)](PF6)2 (5), and [(L8(py)2)Cu](PF6)2 (6). All six complexes are characterized by X-ray crystallography, which reveals that complexes supported by L6(py)2 and L7(py)2 (1, 2, 4, 5) adopt square-pyramidal geometries, while complexes 3 and 6, ligated by L8(py)2 feature tetracoordinate, distorted-square-planar copper ions. Tetragonal geometries in solution and d(x2 - y2), ground states are confirmed for the complexes by a combination of UV-visible and EPR spectroscopies. The divergent flexibility of the three supporting ligands influences the Cu(II)/Cu(I) redox potentials within the family, such that the complexes supported by the larger ligands L7(py)2 and L8(py)2 (5 and 6) exhibit quasi-reversible electron transfer processes (E1/2 approximately -0.2 V vs Ag/AgCl), while the complex supported by L6(py)2 (4), which imposes a rigid tetragonal geometry upon the central copper(II) ion, is irreversibly reduced in CH3CN solution. Complexes 4-6 are efficient catalysts (in 5 mol % amounts) for the aziridination of styrene with the iodinane PhINTs (in 80-90% yields vs PhINTs), while only 4 exhibits significant catalytic nitrene transfer reactivity with 1-hexene and cyclooctene.     

The Morphology of Liquid-Crystalline Polymers and the Possible Consequences for their Rheological Behaviour

Abstract

Polymer liquid crystals can occur as polydomain materials where the domain size may be tens of microns. While the material within each domain may be characterized by a common order parameter, the directors of the domains can be more or less randomly distributed. Since the transition from polydomain to monodomain material only involves the removal of grain boundaries and the alignment of directors, the free energy change must necessarily be small. Such a transition can readily be achieved, therefore, by the action of any external field: electrical, magnetic, stress or surface. In this work optical photomicrographs of polymeric liquid crystals with widely varying and in some cases well controlled morphologies are presented. Probable dependence of rheological behaviour on morphology is also discussed. Such dependence is expected to be considerable under certain conditions. Due to experimental and sample limitations, however, direct correlations of rheology and morphology are sparse. Morphological consequences for the rheology of liquid-crystalline materials can be exemplified by the following possibilities. In contrast to the case of isotropic melts, wall effects can be non-negligible. Zero shear rate rheological parameters are not expected to be uniquely defined quantities since the domain sizes are large and the director may not be effectively averaged over typical sample dimensions. Non-zero shear-rate measurements of rheological parameters is effected by the propensity of: (1) individual domain directors to align under the influence of a stress field and (2) flow alignment to dominate surface-induced alignment above some critical shear rate. The effects might be manifested by a non-newtonian regime as well as yield stress behaviour and thixotropy. The kinetics of relaxation from mono- to poly-domain material has implications for the dynamic response and rheological hysterises of the material.     

1-Chloro-2-deoxy-3,5-di-p-toluoyl-D-erythro-pentosyl Chloride - A Versatile Synthetic Intermediate

Syntheses of 1b-d is described using 1-chloro-2-deoxy-3,5-di-p-toluoyl-D-erythro-pentosyl chloride.     

Syntheses of 3-Chloro-7-[(Chlorocarbonyl)Methoxy]-4-Methylcoumarin

Two efficient syntheses of 3-chloro-7-[(chlorocarbonyl)methoxy]-4-methylcoumarin are described, one utilizing traditional chemistry starting from 3-chloro-7-hydroxy-4-methylcoumarin, while the other uses a novel reagent, sulfuryl chloride/thionyl chloride, in a one-pot reaction starting from 7-(carboxymethoxy)-4-methylcoumarin.