Novel Copolymers of Trisubstituted Ethylenes and Styrene. 7. Dihalogen Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates

Electrophilic trisubstituted ethylenes, dihalogen ring-substituted ethyl 2-cyano-1-oxo-3-phenyl-2-propenylcarbamates, RC₆H₃ CH = C(CN)CONHCO₂C₂H₅(where R is 2,3-diCl, 2,4-diCl, 2,6-diCl, 3,4-diCl, 3,5-diCl, and 2-Cl-6-F, were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and N-cyanoacetylurethane, and characterized by CHN analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H- and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers 2,4-diCl (4.4) > 2,6-diCl (3.6) > 2,3-diCl (3.4) = 3,4-diCl (3.4) > 2-Cl-6-F (2.7) > 3,5-diCl (2.0). High T _g of the copolymers in comparison with that of polystyrene indicates decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene structural unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 270–420°C with residue (5–13% wt), which then decomposed in the 420–650°C range.     

Effect of physical aging of poly(1‐trimethylsilyl‐1‐propyne) films synthesized with TaCl5 and NbCl5 on gas permeability,fractional free volume,and positron annihilation lifetime spectroscopy parameters

The effect of physical aging on the gas permeability, fractional free volume (FFV), and positron annihilation lifetime spectroscopy (PALS) parameters of dense, isotropic poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) films synthesized with TaCl₅ and NbCl₅ was characterized. As‐cast films were soaked in methanol until an equilibrium amount of methanol was absorbed by the polymer. When the films were removed from methanol, film thickness initially decreased rapidly and was almost constant after 70 h in air for both catalysts. This timescale was much longer than the timescale for complete methanol desorption (ca. 5 h). From the film‐thickness data, the reduction in FFV with time was estimated. For samples prepared with either catalyst, the kinetics of FFV reduction were well‐described by a simple model based on the notion either that free‐volume elements diffuse to the surface of the polymer film and are subsequently eliminated from the sample or that lattice contraction controls polymer densification. Methane permeability decreased rapidly during the first 70 h, which was the same timescale for the thickness change. The decrease in methane permeability was smaller in films prepared with NbCl₅ than with TaCl₅. The logarithm of methane permeability decreased linearly as reciprocal FFV increased, in accordance with free‐volume theory. The PALS results indicate that the concentration of larger free‐volume elements (as indicated by the intensity I₄) decreased with aging time and that the other PALS parameters were not strongly influenced by aging. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1222–1239, 2000     

Curing characteristics of carboxyl functionalized glucose resin and epoxy resin

The curing characteristics of carboxylic functionalized glucose resin (glucose maleic acid ester vinyl resin: GMAEV) and epoxy resin have been studied using DSC and FTIR methods. Exothermic reactions attributed to esterification and etherification reactions of the hydroxyl and carboxyl functionalities of GMAEV with the epoxy groups were identified. Exothermic reactions showed very different patterns according to the degree of carboxyl group substituent of GMAEV. The results showed that esterification reaction occurs in the early stage of cure and then etherification followed after completion of the esterification. A cured matrix containing epoxy resin and 50 wt.% of GMAEV was prepared and characterized. The cured matrix showed thermal stability up to 300 °C. The average glass transition temperature and storage modulus of the matrix were as high as 95 °C and 2700 MPa, respectively. The cured matrix of epoxy resin and GMAEV with higher degree of carboxyl group was found to have a lower density due to the formation of bulky groups in the crosslinks.     

Manadomanzamines A and B: a novel alkaloid ring system with potent activity against mycobacteria and HIV-1

Two novel alkaloids, named manadomanzamines A (1) and B (2), were isolated from an Indonesian sponge Acanthostrongylophora sp. (Haplosclerida: Petrosiidae). Their structures were elucidated and shown to be a novel organic skeleton related to the manzamine type alkaloids. Their absolute configuration and conformation were determined by CD, NOESY, and molecular modeling analysis. The microbial community analysis for the sponge that produces these unprecedented alkaloids has also been completed. Manadomanzamines A (1) and B (2) exhibited strong activity against Mycobacterium tuberculosis (Mtb) with MIC values of 1.9 and 1.5 mug/mL, respectively. Manadomanzamines A and B also exhibit activities against human immunodeficiency virus (HIV-1) and AIDS opportunistic fungal infections.     

Solvent effects on the aggregation state of lithium dialkylaminoborohydrides

DFT calculations were performed to determine the effects of ethereal solvents on the aggregation state of lithium dialkylaminoborohydrides (LABs). The calculations included dimerization energies in the gas phase, with continuum solvation only, microsolvation with coordinating ethereal ligands, and a combination of the microsolvation and continuum models. The continuum model alone overestimates the stability of the dimers, apparently due to the lack of steric effects from the coordinating ethereal ligands. The use of the combined microsolvation and continuum solvation models predicts lithium dimethylaminoborohydride to be a mixture of monomer and dimer in THF, and more sterically hindered lithium aminoborohydrides to exist primarily as monomers. The kinetics of amination of 1-chlorodecane by lithium dimethylaminoborohydride showed no detectable change in reaction rate with time, suggesting that the LAB reagent may exist primarily as a monomer in THF.     

Copper(II) Complexes of a Hexadentate Mixed‐Donor N3S3 Macrobicyclic Cage: Facile Rearrangements and Interconversions

The potentially hexadentate mixed‐donor cage ligand 1‐methyl‐8‐amino‐3,13,16‐trithia‐6,10,19‐triazabicyclo[6.6.6]eicosane (AMME‐N₃S₃sar; sar=sarcophagine) displays variable coordination modes in a complex with copper(II). In the absence of coordinating anions, the ligand adopts a conventional hexadentate N₃S₃ binding mode in the complex [Cu(AMME‐N₃S₃sar)](ClO₄)₂ that is typical of cage ligands. This structure was determined by X‐ray crystallography and solution spectroscopy (EPR and NIR UV/Vis). However, in the presence of bromide ions in DMSO, clean conversion to a five‐coordinate bromido complex [Cu(AMME‐N₃S₃sar)Br]⁺ is observed that features a novel tetradentate (N₂S₂)‐coordinated form of the cage ligand. This copper(II) complex has also been characterized by X‐ray crystallography and solution spectroscopy. The mechanism of the reversible interconversion between the six‐ and five‐coordinated copper(II) complexes has been studied and the reaction has been resolved into two steps; the rate of the first is linearly dependent on bromide ion concentration and the second is bromide independent. Electrochemistry of both [Cu(AMME‐N₃S₃sar)]²⁺ and [Cu(AMME‐N₃S₃sar)Br]⁺ in DMSO shows that upon reduction to the monovalent state, they share a common five‐coordinated form in which the ligand is bound to copper in a tetradentate form exclusively, regardless of whether a six‐ or five‐coordinated copper(II) complex is the precursor.     

Photoswitchable luminescence of rhenium(i) tricarbonyl diimines

The synthesis, characterization, and X-ray crystal structures of [Re(diimine)(CO)(3)(dpe)](PF(6)) (dpe = 1,2-di(4-pyridyl)ethylene) compounds are reported. The cis-dpe complexes exhibit yellow luminescence after UV excitation, whereas the trans-dpe counterparts are nonluminescent. The luminescence quantum yields of the cis-dpe complexes are strongly dependent on the identity of the diimine ligand. Irradiation (350 nm) of the trans-dpe complexes induces trans --> cis dpe-ligand isomerization with quantum yields on the order of 0.2, and this process leads to an on-switching of yellow luminescence. After long 350-nm irradiation times, a steady state composed of roughly 70% cis- and 30% trans-dpe complexes is reached. The reverse cis --> trans photoisomerization reaction is induced by irradiating the cis-dpe complexes at 250 nm, switching off the yellow luminescence. For 250-nm excitation, photodecomposition of the [Re(diimine)(CO)(3)(dpe)](+) complexes competes efficiently with photoisomerization.     

The impact of sampling time on peak capacity and analysis speed in on-line comprehensive two-dimensional liquid chromatography

Comprehensive two-dimensional liquid chromatography (2DLC) offers a number of practical advantages over optimized one-dimensional LC in peak capacity and thus in resolving power. The traditional “product rule” for overall peak capacity for a 2DLC system significantly overestimates peak capacity because it neglects under-sampling of the first dimension separation. Here we expand on previous work by more closely examining the effects of the first dimension peak capacity and gradient time, and the second dimension cycle times on the overall peak capacity of the 2DLC system. We also examine the effects of re-equilibration time on under-sampling as measured by the under-sampling factor and the influence of molecular type (peptide vs. small molecule) on peak capacity. We show that in fast 2D separations (less than 1 h), the second dimension is more important than the first dimension in determining overall peak capacity and conclude that extreme measures to enhance the first dimension peak capacity are usually unwarranted. We also examine the influence of sample types (small molecules vs. peptides) on second dimension peak capacity and peak capacity production rates, and how the sample type influences optimum second dimension gradient and re-equilibration times.