Effects of prolonged oral reading on F0, SPL, subglottal pressure and amplitude characteristics of glottal flow waveforms

The effects of prolonged (5x45 minute) reading (vocal loading) on fundamental frequency (F0), sound pressure level (SPL), subglottal (intraroral) pressure (p), and two glottal flow waveform parameters (AC amplitude of glottal flow, f, and negative peak amplitude of differentiated flow (d) of normal female and male subjects (N = 80) were studied. Two rest (morning and noon) and three loading (two in the morning and one in the afternoon) samples were recorded and analyzed. The glottal waveforms were obtained by inverse filtering of the acoustic pressure waveforms of speaking voice samples. The analyses were based on measurement and inverse filtering of the first stressed syllable of "paappa" words repeated 3x5 times for normal, as soft as possible, and as loud as possible phonation. In normal phonation the parameter values changed statistically significantly due to loading. In many cases the values obtained in the morning samples changed after the first loading session. This is interpreted as a vocal "warming-up effect." Especially in soft phonation p, d, and f were sensitive indicators of vocal loading. In both normal and soft phonation, the SPL, p, d, and f values tended to rise due to prolonged reading in the morning and afternoon samples, indicating increased effort (normal phonation) and a rise in the phonatory threshold (soft phonation). The lunch break vocal rest ("rest effect") considerably affected the parameter values in many cases.     

Determination of aluminium in AlCl3 and Al2O3 modified silica catalyst supports

X-ray fluorescence spectrometry (XRF) was applied to determine aluminium in AlCl₃- and Al₂O₃-modified silica catalyst supports that were prepared by gas-solid reactions in an atomic layer epitaxy (ALE) process using aluminium chloride or aluminium chloride and water as adsorbates and silica as support. INAA and AAS were used as reference methods to determine the aluminium content of the supports. The calibration of XRF results was done by plotting the Al/Si intensity ratios against the aluminium content as determined by atomic absorption spectrometry (AAS) and verified by instrumental neutron activation analysis (INAA). Correlation factors for the calibration graphs were 0.984 for AlCl₃/SiO₂ and 0.995 for Al₂O₃/ SiO₂ samples in the aluminium content range 0–2.6 g Al per 100 g of sample. Received: 19 October 1998 / Accepted: 14 December 1998     

Heterogenization of racemic ethylenebis(1-indenyl)zirconium dichloride on trimethylaluminum vapor modified silica surface

Heterogeneous metallocene catalysts were prepared by adsorbing rac-Et(Ind)₂ZrCl₂ on a modified silica surface in solution. The modification of silica was conducted in gas phase with atomic layer chemical vapor deposition (ALCVD) technique, where the silica, preheated at either 350 or 600°C, was allowed to react with vaporized trimethylaluminum (TMA) at 250°C. Modified carriers and heterogeneous catalysts were characterized with FTIR, ¹H MAS (magic-angle spinning) NMR, ¹³C, and ²⁹Si CP (cross-polarization) MAS NMR spectroscopies and elemental analyses. In the reaction of TMA with silica, a saturated surface was formed consisting of different (---O)_4−nSi(CH₃)_n (n=1, 2 or 3) and ---AlCH₃ groups. The ratio of ---SiMe to ---AlMe groups was approximately 1.5 in the TMA/SiO₂ carriers. When the metallocene was adsorbed onto the carrier it seemed to react with the surface ---AlCH₃ groups and possibly ---ZrCH₃ groups were formed. Heterogeneous catalysts were tested in the polymerization of ethylene and propylene in the presence of methylalumoxane (MAO). And they produced similar polymer as the homogeneous rac-Et(Ind)₂ZrCl₂ catalyst, but with lower activity. A catalyst with the best activity was achieved from silica that was preheated at 600°C. Moreover, leaching of catalyst was examined whereupon a part of zirconium was observed to desorb from the carrier.     

ISO 17025 quality system in a university environment

The experience of working under an ISO 17025 compliant quality system in a university environment is described in the example of the Testing Centre of University of Tartu. University-specific features of the quality system include that the Testing Centre acts as the “quality system server” for other units of the university and graduate students participate in the work carried out under the quality system. The benefits for the university and the graduate students are discussed. It is concluded that implementation of an ISO 17025 compatible quality system in a university is fully accomplishable and gives significant added value to the university by helping to destroy the ivory tower perception about universities and by introducing real-world flavour into the studies and broaden the minds (quality awareness) of the students.     

Optimal correlation function for Fermi HNC equations

We show how to find variational equations for the Jastrow pair-correlation function which minimizes the energy of a normal Fermi liquid in the hypernetted chain approximation. By a straightforward extension of the method of Lagrange multipliers, a set of coupled, non-linear integrodifferential equations is obtained. The solutions give both the trial function and the corresponding radial distribution function. For bosons, our equations coincide with the results of paired-phonon analysis.     

Towards the Discrimination of Carboxylates by Hydrogen‐Bond Donor Anion Receptors

The binding constants (log K_ass) of small synthetic receptor molecules based on indolocarbazole, carbazole, indole, urea and some others, as well as their combinations were measured for small carboxylate anions of different basicity, hydrophilicity and steric demands, that is, trimethylacetate, acetate, benzoate and lactate, in 0.5 % H₂O/[D₆]DMSO by using the relative NMR‐based measurement method. As a result, four separate binding affinity scales (ladders) including thirty‐eight receptors were obtained with the scales anchored to indolocarbazole. The results indicate that the binding strength is largely, but not fully, determined by the strength of the primary hydrogen‐bonding interaction. The latter in turn is largely determined by the basicity of the anion. The higher is the basicity of the anion the stronger in general is the binding, leading to the approximate order of increasing binding strength, lactate<benzoate<acetate≤trimethylacetate, which holds with all investigated receptors. Nevertheless, there are a number of occasions when the binding order changes with changing of the carboxylate anion, sometimes quite substantially. Principal component analysis (PCA) reveals that this is primarily connected to preferential binding of trimethylacetate, supposedly caused by an additional hydrophobic/solvophobic interaction. These findings enable making better predictions, which receptor framework or cavity is best suited for carboxylate anions in receptor design.     

A PCA study to determine how features in meteorite reflectance spectra vary with the samples’ physical properties

Meteorites have advanced our knowledge of processes in the Solar System with the application of high precision instruments here on Earth. The study of asteroids, the source of most meteorites, has in turn given us knowledge regarding the large scale evolution of the Solar System. Using the complementary information that asteroids and meteorites give us the story of our cosmic backyard can be more easily read. One efficient way to link meteorites to asteroids is by matching their respective reflectance spectra. There have been few convincing matches because of observational and scale differences as well as an incomplete knowledge of the light scattering physics involved. To better interpret the reflectance data we need to know the dependencies of the reflectance on physical properties and develop techniques for better comparisons of data sets. For these purposes we utilise our own measurements of 26 different meteorites together with spectra available on the NASA PDS.We find that normalisation of reflectance at a wavelength between 1.1 and 1.3 μm gives the closest match of spectra from meteorites common to both data sets. The depth of the spectra bands deepens by similar amounts for different types of surface texture alterations i.e. rock to sawn surface, rock to polished surface and rock to powdered surface. Principal Component Analysis (PCA) is able to easily place carbonaceous chondrites, ordinary chondrites and achondrites into distinct groups using their reflectance spectra. We track the variation of spectral features in principal component space by using a set of meteorite spectra synthesised from mineral and elemental spectra. A spectral agent that reduces the reflectance at all wavelengths is required, in addition to olivine, pyroxene and carbon, to generate a set of synthesised spectra to match the distribution of measured spectra, in principal component space.     

Stable operation of a cw optical parametric oscillator near the signal-idler degeneracy

The frequency stability of a cw optical parametric oscillator (cw OPO) near the signal-idler degeneracy has been studied. The strong tendency of a near-degenerate OPO to mode hop has been suppressed by using a bulk Bragg grating as a spectral filter in the OPO cavity. An experimental demonstration of stable parametric oscillation in a single longitudinal mode of the OPO cavity is reported, together with the capability of tuning the signal-idler difference frequency from 1 to 4 THz. The OPO has potential use in cw terahertz generation.     

2,5‐Dihydroxybenzoic acid solution in MALDI‐MS: ageing and use for mass calibration

2,5‐Dihydroxybenzoic acid (DHB) is one of the most widely used and studied matrix compounds in matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry. However, the influence of ageing of the DHB solution on the MALDI mass spectra has not been yet systematically studied. In this work, the possible changes occurring in the acidified acetonitrile/water solution of the MALDI matrix compound DHB during 1‐year usage period have been monitored with MALDI‐Fourier transform ion cyclotron resonance mass spectrometer (MALDI‐FT‐ICR‐MS) and attenuated total reflectance Fourier transform infrared (ATR‐FT‐IR) spectroscopy. No significant ageing products have been detected. The ability of the aged DHB solution to act as a MALDI matrix was tested with two materials widely used in art and conservation – bone glue (a proteinaceous material) and shellac resin (a resinous material) – and good results were obtained. A number of peaks in the mass spectra measured from the DHB solution were identified, which can be used for internal calibration of the mass axis. Copyright © 2014 John Wiley & Sons, Ltd.