Submonolayer Au on Si(111) phase diagram

Based on a review of the current literature, a surface phase diagram is proposed for the submonolayer Au on Si(111) system. Kinetic considerations are reviewed and key surface phase diagram features such as the Θ < 0.4 ML metastable structure and the high temperature to Si(111)-(1 × 1)Au second order phase transition are discussed. Experiments to verify certain portions of the phase diagram are proposed.     

Surface coil imaging of rat spine at 7.0 T

An inductively coupled surface coil for imaging the rat spine at 7 T is described. This planar circular probe was made from microwave substrate to limit the size of the coil and to minimize the magnetic susceptibility. The surface coil was used as a single transmit/receive coil and as a receive-only coil with a birdcage body coil for excitation. The signal-to-noise ratio (SNR) of the probe was compared to a 5-cm birdcage coil and exceeded the birdcage coil's SNR by three to six times at superficial structures. The main advantages of the probe are an improved SNR for superficial structures and a simple design and use. Images with 50 × 50 × 500 μm voxels were obtained of the rat spine with excellent anatomical detail.     

One‐Pot Cannizzaro Cascade Synthesis of ortho‐Fused Cycloocta‐2,5‐dien‐1‐ones from 2‐Bromo(hetero)aryl Aldehydes

An intramolecular Cannizzaro‐type hydride transfer to an in situ prepared allene enables the synthesis of ortho‐fused 4‐substituted cycloocta‐2,5‐dien‐1‐ones with unprecedented technical ease for an eight‐ring carboannulation. Various derivatives could be obtained from commercially available (hetero)aryl aldehydes, trimethylsilylacetylene, and simple propargyl chlorides in good yields.     

Redox and Coordination Behavior of the Hexaphosphabenzene Ligand in [(Cp*Mo)2(μ,η6:η6‐P6)] Towards the “Naked” Cations Cu+, Ag+, and Tl+

Although the cyclo‐P₆ complex [(Cp*Mo)₂(μ,η⁶:η⁶‐P₆)] ( 1 ) was reported 30 years ago, little is known about its chemistry. Herein, we report a high‐yielding synthesis of 1 , the complex 2 , which contains an unprecedented cyclo‐P₁₀ ligand, and the reactivity of 1 towards the “naked” cations Cu⁺, Ag⁺, and Tl⁺. Besides the formation of the single oxidation products 3 a,b which have a bisallylic distorted cyclo‐P₆ middle deck, the [M( 1 )₂]⁺ complexes are described which show distorted square‐planar (M=Cu( 4 a ), Ag( 4 b )) or distorted tetrahedral coordinated (M=Cu( 5 )) M⁺ cations. The choice of solvent enabled control over the reaction outcome for Cu⁺, as proved by powder XRD and supported by DFT calculations. The reaction with Tl⁺ affords a layered two‐dimensional coordination network in the solid state.     

Galactose Oxidase/Prussian Blue Based Biosensors

This paper describes the development of an amperometric biosensor based on galactose oxidase (GAOx) immobilization within a laponite clay film deposited on Carbon Screen‐Printed Electrodes modified by electrodeposited Prussian Blue and coated with poly‐(O‐phenylenediamine) (PPD/PB/CSPEs). Amperometric performances of GAOx@laponite/PPD/PB/CSPEs bioelectrodes were determined using several GAOx substrates. Using these modified electrodes the reduction of enzymatically generated hydrogen peroxide was performed at ?0.2 V vs. Ag‐AgCl. In an initial attempt, E.Coli transketolase activity on its immobilized form was followed using a bienzymatic GAOx‐TK biosensor.     

Automated solvent system screening for the preparative countercurrent chromatography of pharmaceutical discovery compounds

A fully automated countercurrent chromatography system has been constructed to rapidly screen the commonly used heptane/ethyl acetate/methanol/water solvent system series and translate the results to preparative scale separations. The system utilizes “on‐demand” preparation of the heptane/ethyl acetate/methanol/water solvent system upper and lower phases. Elution‐extrusion countercurrent chromatography was combined with non‐dynamic equilibrium injection reducing the screening time for each heptane/ethyl acetate/methanol/water system to 17 min. The result enabled solvent system development to be reduced to under 2 h. The countercurrent chromatography system was interfaced with a mass spectrometer to allow selective detection of target components in crude medicinal chemistry reaction mixtures. Mass‐directed preparative countercurrent chromatography purification was demonstrated for the first time using a synthetic tetrazole epoxide derived from a routine medicinal chemistry support workflow.     

Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.     

Tight MIP formulations for bounded up/down times and interval-dependent start-ups

Mathematical Programming - Switching machines on and off is an important aspect of unit commitment problems and production planning problems, among others. Here we study tight mixed integer...