Synthesis of a giant 222 carbon graphite sheet

In this paper we present the synthesis and characterization of the so far largest polycyclic aromatic hydrocarbon (PAH), containing 222 carbon atoms or 37 separate benzene units. First a suitable three-dimensional oligophenylene precursor molecule is built up by a sequence of Diels-Alder and cyclotrimerization reactions and then planarized in the final step by oxidative cyclodehydrogenation to the corresponding hexagonal PAH. Structural proof is based on isotopically resolved MALDI-TOF mass spectra and electronic characteristics are studied by UV/Vis spectroscopy.     

Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.     

Linear Synthesis of The Methyl Glycosides of Tri-, Tetra-, and Pentasaccharide Fragments of The Shigella Flexneri Serotype 5A O-Antigen

ABSTRACT

The stepwise synthesis of methyl α-D-glucopyranosyl-(1→3)-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (EBC-OMe, 1), methyl α-L-rhamnopyranosyl-(1→2)-[α-D-glucopyranosyl-(1→3)]-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (A(E)BC-OMe, 2), and methyl 2-acetamido-2-deoxy-β-D-glucopyranosyl-(1→2)-α-L-rhamnopyranosyl-(1→2)-[α-D-glucopyranosyl-(1→3)]-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (DA(E)BC-OMe, 3) is described. Compounds 1, 2 and 3 constitute the methyl glycosides of fragments of the O-specific polysaccharide of Shigella flexneri serotype 5a. Methyl 2,4-di-O-benzoyl-α-L-rhamnopyranosyl-(1→3)-2,4-di-O-benzoyl-α-L-rhamnopyranoside was an appropriate BC precursor for the synthesis of 1. For the synthesis of the branched targets 2 and 3, a benzyl group was best suited at position 2 of rhamnose C. Thus, methyl 4-O-benzyl-α-L-rhamnopyranosyl-(1→3)-2,4-di-O-benzyl-α-L-rhamnopyranoside was the key intermediate to the BC portion. In all cases, 2,3,4,6-tetra-O-benzyl-α-D-glucopyranosyl fluoride was a convenient E precursor, when used in combination with titanium tetrafluoride. All along, attention was paid to steric hindrance as a factor of major impact on the condensation steps outcome. Therefore, based on previous experience, 2-O-acetyl-3,4-di-O-allyl-α-L-rhamnopyranosyl trichloroacetimidate and 3,4,6-tri-O-acetyl-2-deoxy-2-trichloroacetamido-α-D-glucopyranosyl trichloroacetimidate were used as donors. Both suited all requirements when used as key precursors for residues A and D in the synthesis of 3, respectively.     

Further monoterpene chromane esters from Peperomia obtusifolia: VCD determination of the absolute configuration of a new diastereomeric mixture

A reinvestigation of the monoterpene chromane ester enriched fraction from Peperomia obtusifolia using chiral chromatography led to the identification of a minor peak, which was elucidated by NMR and HRMS as fenchyl-3,4-dihydro-5-hydroxy-2,7-dimethyl-8-(3″-methyl-2″-butenyl)-2-(4′-methyl-1′,3′-pentadienyl)-2H-1-benzopyran-6-carboxylate, the same structure assigned to two other fenchyl esters described previously, pointing out a stereoisomeric relationship among them. Further NMR analysis revealed that it was actually a mixture of two compounds, whose absolute configurations were determined by VCD measurements. Although, almost no vibrational transitions could be assigned to the chiral chromane, the experimental VCD spectrum was largely opposite to that obtained for the average experimental VCD [(2S,1?R,2?R,4?S + 2R,1?R,2?R,4?S)/2] for fenchol derivatives. These results allowed us to assign the putative compounds as a racemic mixture of the chiral chromane esterified with the monoterpene (1S,2S,4R)-fenchol, which had not been identified in our early work.     

Living Polymerization via Anionic Initiation for the Synthesis of Well‐Defined PPV Materials

The anionic polymerization of PPV via the sulfinyl precursor route is further investigated. When LHMDS is employed as the base to form the actively propagating quinodimethane system and THF as the solvent, anionic polymerizations can be observed. With the use of tert‐ butyl‐substituted anionic initiators, specific functional groups can be built in the polymer chain and the chain length can be efficiently controlled, which is demonstrated here for the first time. With introduction of branched side chains on the aromatic core, soluble conjugated PPV material can be obtained with molecular weights in the range of 5000–16 000 g mol⁻¹.     

Phase behaviour of tri-n-butylmethylammonium chloride hydrates in the presence of carbon dioxide

The phase behaviour of the system water?Ctri-n-butylmethylammonium chloride (TBMAC)?CCO₂ was investigated by pressure-controlled differential scanning calorimetry in the range 0?C10?mol% TBMAC in water and at CO₂ pressures ranging from 0 to 1.5?MPa. In the absence of CO₂, an incongruent melting hydrate, which estimated composition corresponds to TBMAC·30H₂O, crystallizes at temperatures below ?13.6?°C and forms with ice a peritectic phase at approximately 3.9?mol% TBMAC. In the presence of CO₂ at pressures as low as 0.5?MPa, curves evidenced the presence of an additional phase exhibiting congruent melting at temperatures that are strongly pressure dependent and significantly higher than those of hydrates obtained without CO₂. This new phase, whose enthalpy of dissociation and CO₂ content increase slightly with CO₂ pressure, was identified as a mixed semi-clathrate hydrate of TBMAC and CO₂ of general formula: (TBMAC?+?xCO₂)·30H₂O.     

A new perspective on beta-sheet structures using vibrational Raman optical activity: from poly(L-lysine) to the prion protein

The vibrational Raman optical activity (ROA) spectrum of a polypeptide in a model beta-sheet conformation, that of poly(l-lysine), was measured for the first time, and the alpha-helix --> beta-sheet transition monitored as a function of temperature in H(2)O and D(2)O. Although no significant population of a disordered backbone state was detected at intermediate temperatures, some side chain bands not present in either the alpha-helix or beta-sheet state were observed. The observation of ROA bands in the extended amide III region assigned to beta-turns suggests that, under our experimental conditions, beta-sheet poly(L-lysine) contains up-and-down antiparallel beta-sheets based on the hairpin motif. The ROA spectrum of beta-sheet poly(L-lysine) was compared with ROA data on a number of native proteins containing different types of beta-sheet. Amide I and amide II ROA band patterns observed in beta-sheet poly(L-lysine) are different from those observed in typical beta-sheet proteins and may be characteristic of an extended flat multistranded beta-sheet, which is unlike the more irregular and twisted beta-sheet found in most proteins. However, a reduced isoform of the truncated ovine prion protein PrP(94-233) that is rich in beta-sheet shows amide I and amide II ROA bands similar to those of beta-sheet poly(L-lysine), which suggests that the C-terminal domain of the prion protein is able to support unusually flat beta-sheets. A principal component analysis (PCA) that identifies protein structural types from ROA band patterns provides a useful representation of the structural relationships among the polypeptide and protein states considered in the study.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Photosensitization of nanocrystalline TiO2 by self-assembled layers of CdS quantum dots

CdS quantum dots can be self-assembled on high surface area nanocrystalline TiO2 electrodes; spectroscopic and photoelectrochemical studies indicate that the size, and hence the absorption edge, of the CdS particles can be controlled; efficient photosensitization of the TiO2 electrode by the Q-particles has been achieved.