Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Mean first passage time of active Brownian particle in one dimension

We investigate the mean first passage time of an active Brownian particle in one dimension using numerical simulations. The activity in one dimension is modelled as a two state model; the particle moves with a constant propulsion strength but its orientation switches from one state to other as in a random telegraphic process. We study the influence of a finite resetting rate r on the mean first passage time to a fixed target of a single free active Brownian particle and map this result using an effective diffusion process. As in the case of a passive Brownian particle, we can find an optimal resetting rate r* for an active Brownian particle for which the target is found with the minimum average time. In the case of the presence of an external potential, we find good agreement between the theory and numerical simulations using an effective potential approach.     

Analysis of fiber optic SPR sensor utilizing platinum based nanocomposites

SPR based fiber optic sensor using nanocomposite is presented. Nanocomposites comprising of Pt nanoparticles with various volume fractions embedded in dielectric matrices of TiO₂ and SnO₂ are considered. Sensitivity enhances with increase in thickness of nanocomposite and volume fraction of nanoparticles for both nanocomposites. Optimized thicknesses are obtained to be 40 and 50 nm for Pt–TiO₂ and Pt–SnO₂ nanocomposites respectively while optimized volume fraction is found to be 0.85 for both nanocomposites. 40 nm thick Pt–TiO₂ nanocomposite based sensor with 0.85 volume fraction possesses utmost sensitivity.     

Uniqueness of Mass-Conserving Self-similar Solutions to Smoluchowski’s Coagulation Equation with Inverse Power Law Kernels

Uniqueness of mass-conserving self-similar solutions to Smoluchowski’s coagulation equation is shown when the coagulation kernel K is given by \(K(x,x_*)=2(x x_*)^{-\alpha }\), \((x,x_*)\in (0,\infty )^2\), for some \(\alpha >0\).     

Ag implantation-induced modification of Ni–Ti shape memory alloy thin films

Nanocrystalline thin films of Ni–Ti shape memory alloy are deposited on an Si substrate by the DC-magnetron co-sputtering technique and 120?keV Ag ions are implanted at different fluences. The thickness and composition of the pristine films are determined by Rutherford Backscattering Spectrometry (RBS). X-Ray diffraction (XRD), atomic force microscopy (AFM) and four-point probe resistivity methods have been used to study the structural, morphological and electrical transport properties. XRD analysis has revealed the existence of martensitic and austenite phases in the pristine film and also evidenced the structural changes in Ag-implanted Ni–Ti films at different fluences. AFM studies have revealed that surface roughness and grain size of Ni–Ti films have decreased with an increase in ion fluence. The modifications in the mechanical behaviour of implanted Ni–Ti films w.r.t pristine film is determined by using a Nano-indentation tester at room temperature. Higher hardness and the ratio of higher hardness (H) to elastic modulus (E_r) are observed for the film implanted at an optimized fluence of 9?×?10¹⁵ ions/cm². This improvement in mechanical behaviour could be understood in terms of grain refinement and dislocation induced by the Ag ion implantation in the Ni–Ti thin films.     

Raman spectroscopy of the BC3 phase obtained under high pressure and high temperature

A direct transformation of the g‐BC₃ phase to a new diamond‐like d‐BC₃ phase was observed in a diamond‐anvil cell (DAC) at high temperature, 2033 ± 241 K, and high pressure, 50 GPa. Analysis of the peak positions of the d‐BC₃, B₄C, α‐boron, and the boron‐doped diamond leads to the conclusion that the positions of the peaks of the d‐BC₃ are more similar to the peak pattern of the boron‐doped diamond rather than that of boron carbide, α‐boron. Copyright © 2007 John Wiley & Sons, Ltd.     

Prior exposure to an attenuated <Emphasis Type="Italic">Listeria</Emphasis> vaccine does not reduce immunogenicity: pre-clinical assessment of the efficacy of a <Emphasis Type="Italic">Listeria</Emphasis>vaccine in the induction of immune responses against HIV

Background  

We have evaluated an attenuated Listeria monocytogenes (Lm) candidate vaccine vector in nonhuman primates using a delivery regimen relying solely on oral vaccination. We sought to determine the impact of prior Lm vector exposure on the development of new immune responses against HIV antigens.     

Magnetic and martensitic transitions in Ni-Fe-Ga alloy

The ferromagnetic shape memory alloy with nominal composition Ni₅₄Fe₁₉Ga₂₇ is investigated by Ac susceptibility and resistivity measurements. The alloy shows long-range ferromagnetic order below 290 K. The anomaly due to the martensitic transition is observed in the susceptibility and resistivity data in the temperature range around 220 K, which is associated with clear thermal hysteresis. Minor hysteresis loop technique was used to investigate the phase coexistence across the martensitic transition, and our analysis indicate that both martensite and austenite phases mutually coexist in the region of hysteresis.     

Diffusion of water in molecular magnet Cu(0.75)Mn(0.75)[Fe(CN)6]·7H2O

Here we report the dynamical behaviour of water in Prussian blue analogue (PBA) Cu(0.75)Mn(0.75)[Fe(CN)(6)]·7H(2)O molecular magnet in the temperature range 260-360 K as studied using the quasielastic neutron scattering technique. While significant quasielastic broadening is observed in the hydrated sample, no broadening was observed in the dehydrated one. Data analysis showed that the observed quasielastic broadening in Cu(0.75)Mn(0.75)[Fe(CN)(6)]·7H(2)O corresponds to the dynamics of the non-coordinated water molecules at the 32f site and the coordinated water molecules at the 24e site, existing in the cavities created by the absence of Fe(CN)(6) units. The non-coordinated water molecules at 8c interstitial sites do not contribute to the broadening, suggesting that they are immobile at least within the time window of the spectrometer used. Behaviour of the elastic incoherent structure factor is consistent with the model where the water molecules undergo translational diffusion localized within the cavity of 5.1 ?. While all the non-coordinated water molecules at the 32f site are dynamic over the entire range of temperatures, the coordinated ones at the 24e site become progressively dynamic with temperature. The water molecules were found to undergo hindered (~1.16 × 10(-5) cm(2) s(-1) at 300 K) diffusion compared to bulk water and the diffusivity followed Arrhenius behaviour within the measured temperature range with an activation energy of 1.26 kcal mol(-1).