From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

The synthesis and spectroscopic characterisation of hydrotalcite formed from aluminate solutions

Raman spectroscopy has been used to characterise nine hydrotalcites prepared from aluminate and magnesium solutions (magnesium chloride and seawater). The aluminate hydrotalcites are proposed to have the following formula Mg(6)Al(2)(OH)(16)(CO(3)(2-))·xH(2)O, Mg(6)Al(2)(OH)(16)(CO(3)(2-),SO(4)(2-))·xH(2)O, and Mg(6)Al(2)(OH)(16)(SO(4)(2-))·xH(2)O. The synthesis of these hydrotalcites using seawater results in the intercalation of sulfate anions into the hydrotalcite interlayer. The spectra have been used to assess the molecular assembly of the cations and anions in the hydrotalcite structures. The spectra have been conveniently subdivided into spectral features based upon the carbonate anion, the hydroxyl units and water units. This investigation has shown the ideal conditions to form hydrotalcite from aluminate solutions is at pH 14 using a magnesium chloride solution at a volumetric ratio of 1:1. Changes in synthesis conditions resulted in the formation of impurity products aragonite, thenardite, and gypsum.     

Gelatin‐Alginate Gels and Their Enzymatic Modifications: Controlling the Delivery of Small Molecules

The release of molecules entrapped within biogels is dictated by diffusion laws. Innovative biogel architectures are conceived and tested to control small molecule delivery from gelatin gels. The ionic interactions modulate the release of small molecules. Alginate is then added to gelatin gels and further hydrolyzed; the influence of viscosity is discussed. Next, various mixed gels are compared, such as a gelatin‐alginate IPN and the original architecture of an alginate gel entrapped in a gelatin gel with or without a polysaccharidase. The relative influence of ionic interactions and diffusional constraints on the delivery of small charged molecules is explored, and a solution for controlling diffusion is proposed for any situation.

     

Large‐Scale Synthesis of Enantiopure Molecular Cages: Chiroptical and Recognition Properties

A convenient and efficient gram‐scale synthesis for enantiopure hemicryptophane–tren (tren=tris(2‐aminoethyl)amine) derivatives has been developed. The four‐step synthesis is based on the optical resolution of a key intermediate, cyclotriveratrylene, for which the energy barrier for racemization has been measured to ensure that no racemization occurs during the two last steps of the synthetic pathway. The assignments of the absolute configurations have been performed by electronic circular dichroism and the enantiopurity was determined by NMR spectroscopy in the presence of enantiopure camphor sulfonic acid. To highlight the interest of such compounds, the recognition of norephedrine neurotransmitter was investigated and showed a remarkable enantioselectivity towards the C₃ symmetrical hosts. Finally, this highly modular synthetic pathway was used to provide eight enantiopure hemicryptophanes with different sizes, shapes, and functionalities. These results underline the high potential of this approach, which could lead to many applications in chiral recognition or asymmetric supramolecular catalysis.     

Large‐Scale Synthesis of Helicene‐Like Molecules for the Design of Enantiopure Thin Films with Strong Chiroptical Activity

Helicenes are fascinating molecules owing to their unusual properties and applications in many fields from catalysis to organic electronics. Herein, we report a straightforward pathway for the synthesis of helicene‐like molecules on a gram scale in an enantiopure form. Thin‐film materials with good propagating optical properties and very high chiroptical responses have been grown by using pulsed laser ablation without altering the structure or the enantiopurity of the molecules. Moreover, electronic and vibrational circular dichroism spectroscopies coupled with theoretical calculations enabled some dependences of the chiroptical properties with the structure to be highlighted, for example, effects of rigidification, aromatization, or the state of matter (liquid versus solid).     

Relaxation Dynamics and Magnetic Anisotropy in a Low‐Symmetry DyIII Complex

The magnetic behaviour of a Dy(LH)₃ complex (LH^? is the anion of 2‐hydroxy‐N′‐[(E)‐(2‐hydroxy‐3‐methoxyphenyl)methylidene]benzhydrazide) was analysed in depth from both theoretical and experimental points of view. Cantilever torque magnetometry indicated that the complex has Ising‐type anisotropy, and provided two possible directions for the easy axis of anisotropy due to the presence of two magnetically non‐equivalent molecules in the crystal. Ab initio calculations confirmed the strong Ising‐type anisotropy and disentangled the two possible orientations. The computed results obtained by using ab initio calculations were then used to rationalise the composite dynamic behaviour observed for both pure Dy^III phase and Y^III diluted phase, which showed two different relaxation channels in zero and non‐zero static magnetic fields. In particular, we showed that the relaxation behaviour at the higher temperature range can be correctly reproduced by using a master matrix approach, which suggests that Orbach relaxation is occurring through a second excited doublet.     

Unraveling σ and π Effects on Magnetic Anisotropy in cis‐NiA4B2 Complexes: Magnetization,HF‐HFEPR Studies,First‐Principles Calculations,and Orbital Modeling

By using complementary experimental techniques and first‐principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C_2v, has been investigated. Four complexes have the general formula [Ni(bpy)X₂]ⁿ⁺ (bpy=2,2′‐bipyridine; X₂=bpy ( 1 ), (NCS^?)₂ ( 2 ), C₂O₄^2? ( 3 ), NO₃^? ( 4 )). In the fifth complex, [Ni(HIM₂‐py)₂(NO₃)]⁺ ( 5 ; HIM₂‐py=2‐(2‐pyridyl)‐4,4,5,5‐tetramethyl‐4,5‐dihydro‐1H‐imidazolyl‐1‐hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM₂‐py. Analysis of the high‐field, high‐frequency electronic paramagnetic resonance (HF‐HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from ?1 to ?10 cm^?1. First‐principles SO‐CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3 , on one hand, and 4 and 5 , on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and g_i) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the e_g‐like orbitals and is due to the difference in the σ‐donor strength of NO₃^? and bpy or HIM₂‐py, whereas the difference in anisotropy between the two compounds is due to splitting of the t_2g‐like orbitals; and 2) the anisotropy of complexes 1 – 3 arises from the small splitting of the t_2g‐like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.     

Bis‐clickable Mesoporous Silica Nanoparticles: Straightforward Preparation of Light‐Actuated Nanomachines for Controlled Drug Delivery with Active Targeting

Bis(clickable) mesoporous silica nanospheres (ca. 100 nm) were obtained by the co‐condensation of TEOS with variable amounts (2–5 % each) of two clickable organosilanes in the presence of CTAB. Such nanoparticles could be easily functionalized with two independent functions using the copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction to transform them into nanomachines bearing cancer cell targeting ligands with the ability to deliver drugs on‐demand. The active targeting was made possible after anchoring folic acid by CuAAC click reaction, whereas the controlled delivery was performed by clicked azobenzene fragments. Indeed, the azobenzene groups are able to obstruct the pores of the nanoparticles in the dark whereas upon irradiation in the UV or in the blue range, their trans‐to‐cis photoisomerization provokes disorder in the pores, enabling the delivery of the cargo molecules. The on‐command delivery was proven in solution by dye release experiments, and in vitro by doxorubicin delivery. The added value of the folic acid ligand was clearly evidenced by the difference of cell killing induced by doxorubicin‐loaded nanoparticles under blue irradiation, depending on whether the particles featured the clicked folic acid ligand or not.