Thermodynamic analysis of the phase separation during the polymerization of a thermoset system into a thermoplastic matrix. II. Prediction of the phase composition and the volume fraction of the dispersed phase

A thermodynamic simulation of the phase‐separation process of an off‐critical blend, based on a thermoplastic matrix with a reactive epoxy system undergoing polycondensation at a constant temperature, was performed. The model considered the composition dependence of the interaction parameter, χ(T,Φ₂) (where T is the temperature and Φ₂ is the volume fraction of polystyrene), along with the polydispersity of both polymers. For every level of conversion, the simulation provided the amount, composition, stoichiometric ratio, and conversion of each phase present. The accuracy of the model was proved by the good agreement between the experimental and predicted glass‐transition temperatures and heat capacity changes at the glass‐transition temperatures for both phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1361–1368, 2004     

Porous Ionic Liquids or Liquid Metal–Organic Frameworks?

Porous liquids can be prepared from the dispersion metal–organic frameworks (MOFs) in ionic liquids (ILs). Porous liquids prepared from 5 % of ZIF‐8 in a phosphonium‐based ionic liquid are capable of absorbing reversibly up to 150 % more nitrogen and 100 % more methane than the pure ionic liquid.     

Sheath liquid interface for the coupling of normal-phase liquid chromatography with electrospray mass spectrometry and its application to the analysis of neoflavonoids

A novel interface that allows normal-phase liquid chromatography to be coupled with electrospray ionization (ESI) is reported. A make-up solution of 60 mM ammonium acetate in methanol, infused at a 5 microl min(-1) flow-rate at the tip of the electrospray probe, provides a sheath liquid which is poorly miscible with the chromatographic effluent, but promotes efficient ionization of the targeted analytes. Protonated molecules generated in the ESI source were subjected to tandem mass spectrometric experiments in a triple-quadrupole mass spectrometer. The main fragmentation reactions were characterized for each analyte and specific mass spectral transitions were used to acquire chromatographic data in the multiple reaction monitoring detection mode. Results obtained during optimization of the sheath liquid composition and flow-rate suggest that the electrospray process was mainly under the control of the make-up solution, and that it forms an external charged layer around a neutral chromatographic mobile phase core. This sheath liquid interface was implemented for the analysis of some neoflavonoid compounds and its performance was evaluated. Limits of detection were established for calophillolide, inophyllum B, inophyllum P and inophyllum C at 100, 25, 15 and 100 ng ml(-1), respectively.     

Low temperature crystallization behavior of TiO<Subscript>2</Subscript> derived from a sol–gel process

TiO₂ nanoparticles are widely used for many applications and an understanding of the crystallization behavior of TiO₂ is essential, so that heat treatment conditions can be optimized for particular applications. The effect of sol–gel synthesis conditions on the crystallization behavior of TiO₂ has, therefore, been investigated. Complete crystallization to the anatase phase (determined by XRD and TEM analysis) was achieved during drying of the synthesis product at 95 °C. The nanoparticles grew during heat treatment, reaching ∼10–15 nm in diameter with a heat treatment at 450 °C. Explanations are offered for the observed differences in the crystallization and particle growth behavior of TiO₂ synthesized under various conditions.     

Mercury speciation analysis in human hair by species-specific isotope-dilution using GC–ICP–MS

We optimized a mercury (Hg) speciation extraction method for human hair in combination with species-specific isotope-dilution analysis by gas chromatography–inductively coupled plasma–mass spectrometry (GC–ICP–MS). The method was validated on human hair reference material RM (IAEA-086), which is recommended for analysis of monomethylmercury (MMHg) and inorganic mercury (IHg). Three reagents, hydrochloric acid (HCl), nitric acid (HNO₃), and tetramethylammonium hydroxide (TMAH), and three extraction procedures, at ambient temperature for 12 h, microwave-assisted at 75 °C for 6 min, and oven heated at 80 °C for 2 h were tested. Extraction efficiency, recovery, and potential species transformations were evaluated for each method. The most efficient procedures, with recovery of ~90 % for each species with limited demethylation (<5 %) and methylation (0 %), were HNO₃ digestion, irrespective of temperature, and microwave-assisted TMAH extraction. Acidic extraction with HCl induces significant demethylation, with production of artifacts. To correct for potential demethylation artifacts we recommend spiking with isotopically enriched standards before the extraction step.     

Efficient Synthesis of Differentiated syn‐1,2‐Diol Derivatives by Asymmetric Transfer Hydrogenation–Dynamic Kinetic Resolution of α‐Alkoxy‐Substituted β‐Ketoesters

Asymmetric transfer hydrogenation was applied to a wide range of racemic aryl α‐alkoxy‐β‐ketoesters in the presence of well‐defined, commercially available, chiral catalyst Ru^II–(N‐p‐toluenesulfonyl‐1,2‐diphenylethylenediamine) and a 5:2 mixture of formic acid and triethylamine as the hydrogen source. Under these conditions, dynamic kinetic resolution was efficiently promoted to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters derived from substituted aromatic and heteroaromatic aldehydes with a high level of diastereoselectivity (diastereomeric ratio (d.r.)>99:1) and an almost perfect enantioselectivity (enantiomeric excess (ee)>99 %). Additionally, after extensive screening of the reaction conditions, the use of Ru^II‐ and Rh^III‐tethered precatalysts extended this process to more‐challenging substrates that bore alkenyl‐, alkynyl‐, and alkyl substituents to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters with excellent enantiocontrol (up to 99 % ee) and good to perfect diastereocontrol (d.r.>99:1). Lastly, the synthetic utility of the present protocol was demonstrated by application to the asymmetric synthesis of chiral ester ethyl (2S)‐2‐ethoxy‐3‐(4‐hydroxyphenyl)‐propanoate, which is an important pharmacophore in a number of peroxisome proliferator‐activated receptor α/γ dual agonist advanced drug candidates used for the treatment of type‐II diabetes.