Michael additions of benzoins versus Michael-Stetter additions of aldehydes

Triethylamine catalyzed Michael additions of benzoins to chalcone can prevail over the expected Michael-Stetter additions when certain thiazolium ion conjugate bases - prepared $\text{in situ}$ from the pertinent thiazolium salts and triethylamine- are used as catalysts.     

Comparison of three sequential extraction procedures (original and modified 3 steps BCR procedure) applied to sediments of different origin

The 3 steps sequential extraction procedure proposed by the Standards Measurements and Testing program (SM&T--formerly BCR) of the European Union has been applied for the speciation of metals in sediments. Results obtained by the application of the BCR standardized procedure were compared to those of two four step sequential extraction procedures, which are different from the BCR procedure only for the introduction of an additional step with NaOCl, as 2nd and 3rd step respectively. Five different metals have been taken into consideration: Cd, Cu, Ni, Pb and Zn. The analytical performances of the laboratory have been evaluated using three certified reference materials: the BCR 601 lake sediment for the BCR sequential extraction procedure, PACS-1 and MESS-1 for total metal concentration. Results showed that the efficiency of NaOCl treatment is higher or at least equal to that of H2O2 treatment and that its selectivity is quite satisfying. Moreover the NaOCl treatment doesn't significantly influence the extraction of the easily reducible fraction.     

Counterion exchange selectivity coefficients at water-in-oil microemulsion interface

The counterion binding at a water/Aerosol-OT (AOT)/heptane microemulsion interface was treated in the context of the pseudo-phase ion exchange formalism. Two approaches were used to determine the selectivity coefficient for copper/sodium counterion binding at the AOT microemulsion interface: measurements of the Cu(II) concentration taken up by the reverse micelle in a Winsor II microemulsion system and steady-state emission quenching measurements of an anionic water-solubilized probe, the tris-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium (II) ion. In addition, the selectivity coefficient for methyl viologen/sodium at the microemulsion surface was determined by the same photophysical technique. The value for copper (II)/sodium exchange (K(Cu/Na)) is 1.1+/-0.3 and that for methyl viologen/sodium (K(MV/Na)) is 0.9+/-0.3. The results show that the pseudo-phase ion exchange model can be used to obtain the selectivity coefficient in a microemulsion system.     

Spectroscopic investigation and thermal behavior of new carbonyl complexes [M(CO)4(N—N)(CuX)], (M = W,Mo; N—N = 2,2′-bipyridine, 1,10-phenanthroline; X = Cl,SCN)

[M(CO)₄(N—N)] reacts with CuCl to give new heterobimetallic metal carbonyls of the type [M(CO)₄(N—N)(CuCl)], M = W, Mo; N—N = 2,2-bipyridine (bipy), 1,10-phenanthroline (phen). Reactions of [M(CO)₄(N—N)(CuCl)] with NaSCN produced the series of complexes of general formula [M(CO)₄(N—N)(CuSCN)]. The i.r. spectral of all the bimetallic carbonyls exhibited the general four (CO) band patterns of the precursors. The u.v.–vis. spectral data for precursors and products showed bands associated with * (nitrogen ligands), dd (intrametal), as well as MLCT d* (nitrogen ligands) and MLCT d *(CO) transitions. The [M(CO)₄(N—N)(CuX)] (X = Cl, SCN) emission spectra showed only one band associated with the MLCT transition. The t.g. curves revealed a stepwise loss of CO groups. The initial decomposition temperatures of the [M(CO)₄(N—N)(CuX)] series suggest that the bimetallic compounds are indeed thermally less stable than their precursors, and the X-ray data showed the formation of MO₃, CuMO₄, Cu₂O and CuO as final decomposition products, M = W, Mo. The spectroscopic data suggests that the heterobimetallic compounds are polymeric.     

Metal complexes with a new N(4)O(3) amine pendant-armed macrocyclic ligand: synthesis, characterization, crystal structures, and fluorescence studies

The synthesis of a new oxaaza macrocyclic ligand, L, derived from O(1),O(7)-bis(2-formylphenyl)-1,4,7-trioxaheptane and tren containing an amine terminal pendant arm, and its metal complexation with alkaline earth (M = Ca(2+), Sr(2+), Ba(2+)), transition (M = Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+)), post-transition (M = Pb(2+)), and Y(3+) and lanthanide (M = La(3+), Er(3+)) metal ions are reported. Crystal structures of [H(2)L](ClO(4))(2).3H(2)O, [PbL](ClO(4))(2), and [ZnLCl](ClO(4)).H(2)O are also reported. In the [PbL] complex, the metal ion is located inside the macrocyclic cavity coordinated by all N(4)O(3) donor atoms while, in the [ZnLCl] complex, the metal ion is encapsulated only by the nitrogen atoms present in the ligand. pi-pi interactions in the [H(2)L](ClO(4))(2).3H(2)O and [PbL](ClO(4))(2) structures are observed. Protonation and Zn(2+), Cd(2+), and Cu(2+) complexation were studied by means of potentiometric, UV-vis, and fluorescent emission measurements. The 10-fold fluorescence emission increase observed in the pH range 7-9 in the presence of Zn(2+) leads to L as a good sensor for this biological metal in water solution.     

Sequence-defined positioning of amine and amide residues to control catechol driven wet adhesion

Catechol and amine residues, both abundantly present in mussel adhesion proteins, are known to act cooperatively by displacing hydration barriers before binding to mineral surfaces. In spite of synthetic efforts toward mussel-inspired adhesives, the effect of positioning of the involved functional groups along a polymer chain is not well understood. By using sequence-defined oligomers grafted to soft hydrogel particles as adhesion probes, we study the effect of catechol–amine spacing, as well as positioning relative to the oligomer terminus. We demonstrate that the catechol–amine spacing has a significant effect on adhesion, while shifting their position has a small effect. Notably, combinations of non-charged amides and catechols can achieve similar cooperative effects on adhesion when compared to amine and catechol residues. Thus, these findings provide a blueprint for the design of next generation mussel-inspired adhesives.

The catechol driven adhesion of precision macromolecules on glass surfaces is quantified by soft colloidal probe readout. Catechol moieties are shown to synergize with amine and amide residues depending on residue spacing and residue order.     

Fast solid-phase extraction-gas chromatography-mass spectrometry procedure for oil fingerprinting. Application to the Prestige oil spill

A rapid and simple fractionation procedure using solid-phase extraction (SPE) cartridges was developed for an accurate determination of aliphatic and polycyclic aromatic hydrocarbons in petroleum residues and further application in chemical fingerprinting of oil spills by gas chromatography-mass spectrometry (GC-MS). Among the adsorbents evaluated, SiO2/C3-CN exhibited the best selectivity, providing, by elution with n-hexane (4 ml) and n-hexane-CH2Cl2 (1:1) (5 ml), two well-resolved aliphatic and aromatic hydrocarbon fractions, with recoveries of 97 +/- 7.2 and 99.7 +/- 13.9%, respectively. The SPE fractionation procedure was compared with the conventional silica-alumina adsorption chromatography showing similar results but practical advantages in terms of reproducibility, analysis time, solvent reduction and cost. Moreover, is particularly suitable for routine analysis with a high sample throughput. The developed methodology was tested in the characterization of fuel-oil samples collected along the Spanish north-west coast, after the Prestige oil spill accident.     

Complexation en solution aqueuse des ions magnesium(II), manganese(II), nickel(II), cuivre(II) et plomb(II) avec la s-carboxymethyl-l-cysteine: Complex formation of magnesium(II), manganese(II), nickel(II), copper(II) and lead(II) with S-carboxymethyl-L-cysteine in aqueous solution

Complex formation of magnesium(II), manganese(II), nickel(II), copper(II) and lead(II) with S-carboxymethyl-L-cysteine in aqueous solution.The complex formation between Mg(II), Mn(II), Ni(II). Cu(II), Pb(II) ions and S-carboxy-methyl-l-cysteine (H₂A) has been studied by measurement of pH at 25°C and constant ionic strength (1 M NaClO₄). Although no interaction occurs with Mg(II), this work provides evidence for a variety of complexes: MnA; CuHA⁺; CuA; CuA₂^2-; NiHA⁺; NiA; NiA₂^2-; PbHA⁺; PbA et PbA(OH)^-. The overall formation constants of all these species are computed and refined. The results allow the determination of the distribution of the complexes as a function of pH; some structural features of the metal complexes in solution are indicated.     

Stereochemistry of cyclobutanone resulted from cycloadditions of t-butylcyanoketene to bicyclo[2.2.1]heptene derivatives, as evidence for a π2s+π2a reaction mode

The stereochemistry of the cyclobutanones 1-7, resulted from the reaction of t-butylcyanoketene with bicyclo[2.2.1]heptene, bicyclo[2.2.1]heptadiene, 1,4 - dihydro - 1,4 - methanonaphthalene, 1,4 - dihydro - 9 - (1 - methylethylidene) - 1,4 - methanonaphthalene, 1,4 - dihydro - 1,4 - epoxynaphthalene, l,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene (l,4,4a,8b) and 1,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene(1,4,4aβ,8bβ) was established as having the cyclobutanone ring exo and the t-Bu group in the configuration. These findings represent a stereochemical argument in favour of a _π2_s + _π2_a reaction mode of t-butylcyanoketene to the above mentioned bicyclo[2.2.1]heptene derivatives. Observations regarding preservation of the original configurations of alkenes as well as the geometrical distorsion of the cyclobutanones are shortly discussed.     

PHOTOOXIDATION OF A REFINED PETROLEUM OIL: INHIBITION BY β-CAROTENE AND ROLE OF SINGLET OXYGEN

Abstract— β-Carotene, at concentrations 0.1 m M , inhibits the formation of hydroperoxides and other oxidation products in a refined petroleum oil exposed to Pyrex-filtered UV. The effect appears to be due to ¹O₂ quenching. A mechanism incorporating ¹O₂ and radical processes is proposed as a model for environmental photooxidation of petroleum.