A re-investigation of copper coordination in the octa-repeats region of the prion protein

An aqueous solution spectroscopic (Vis and EPR) study of the copper(II) complexes with the Ac-HGGG-NH2 and Ac-PHGGGWGQ-NH2 polypeptides (generically designated as L) suggests square base pyramids ascribable to [Cu(L)H(-2)] complex species, which contain three nitrogen donor atoms, arising from imidazole and peptide groups, in the equatorial plane and for a pseudo-octahedral geometry in the case of [CuLH-3]- and [Cu(L)H-4]2- which have four nitrogen donor atoms in their equatorial plane. The coordination sphere of the copper complex in the [Cu(L)H(-2)] species, which is present at neutral pH values, is completed by two oxygen donor atoms. ESI-MS spectra ascertained that water molecules are not present in the coordination equatorial plane of this latter species, in comparison with other copper(II) complexes with ligands bearing nitrogen and oxygen donor atoms and surely having equatorial water molecules. This indicates the coordination of a carbonyl oxygen atom in the equatorial plane has to be invoked. However, no direct proof about the involvement of a carbonyl group oxygen donor atom apically linked to copper was obtained, due to the flexibility of these structures at room temperature. Additionally, the low A(ll) value leads one to consider another oxygen atom of a carbonyl group being involved in the apical bond to copper in a fast exchange fashion. This apical interaction, which may also involve a water molecule, is more pronounced in the Cu-Ac-HGGG-NH2 than in the analogous Cu-Ac-PHGGGWGQ-NH2 system, probably because of the presence of tryptophan and proline in the polypeptide sequence.     

Analytical characterization of diterpenoid resins present in pictorial varnishes using pyrolysis-gas chromatography-mass spectrometry with on line trimethylsilylation

A procedure based on the technique of the pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) has been applied, in this work, in order to determine the composition of diterpenoid resin employed in art works. The method is based on the on line derivatization of these resins using hexamethyldisilazane (HMDS). Results obtained were compared with those previously reported in literature from Venice turpentine, Strasbourg turpentine, colophony, sandarac and Manila copal using this same method and with those others from in situ thermally assisted hydrolysis and methylation with tetramethylammonium hydroxide (TMAH). Canada balsam, copper resinate and Copaiba balsam have been also analyzed extending the scope of this method in the field of the analysis of artwork materials. Several non-reported trimethylsilylated derivatives of compounds present in the diterpenoid resins have been identified. An improvement in sensitivity has been obtained by using HMDS as derivatizing reagent, together with a better resolution of the most representative peaks. Additionally, this method reduces the number of pyrolytic fragmentation, recombination, dehydration and isomerization products formed during the pyrolysis process and, in consequence, more simplified chromatograms are obtained. Finally, the reported procedure has been successfully used for characterizing two diterpenoid resin-based varnishes present in the canvas painting "The Betrothal of the Virgin" (Anonymous, 17th century) which is included in the pictorial collection of Saint Joseph Church in Taormina (Italy) and the Magdalena Tryptich (Master of Alzira, 16th century, Valencia, Spain).     

Ramanspektroskopische Untersuchungen an PCl5 II. Das System PCl5—ZrCl4

Raman spectra of some solid and molten PCl₅–ZrCl₄ mixtures have been recorded. ZrCl₆ ^2– complex ions accompanied by at least one more chlorozirconate species are present in the solid as well as in the melt. The newRaman frequencies are attributed to ZrCl₅ ^–, which fundamentals are given and assignment is proposed to be analogous to TiCl₅ ^–. The presence of ZrCl₆ ^2– and ZrCl₅ ^– can be explained by the equilibrium ZrCl₆ ^2–+PCl₄ ⁺ZrCl₅ ^–+PCl₅.

     

A new electrolytic dissolution of aluminum alloys and determination of some constituents by inductively coupled plasma optical emission spectrometry

The new electrolytic dissolution in batch of aluminum alloys samples as grains or turns and the determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb and Ti by ICP OES was investigated. In on-line electrodissolution procedures described in the literature, samples were restricted to be in the form of solid blocks or plates with one polished flat face. Here, the sample was loaded in the barrel of a modified disposable syringe (the anodic semi-cell) and pressed with a modified plunger fitted with a platinum disk to establish electrical contact with the analyte. This arrangement was introduced in a beaker containing the electrolyte (1 mol L⁻¹ HNO₃) and a platinum wire as the cathode. The resulting solution from electrodissolution (0.6 A) was used for the ICP OES determinations. The influence of the aluminum concentration increase on the determination of the elements was evaluated. Electrodissolution of certified reference materials and commercial samples revealed relative errors lower than 10% for the elements Fe, Cu, Mg, Ni, Cr, Zn and Ti (when their content is above 0.1%). Higher inaccuracies (>10%) were observed for Mn and for Fe in B.C.S. 268/1 reference material certified. The proposed method presented a relative standard deviations (R.S.D.) lower or circa 10% to all of the elements (except Pb). In comparison with traditional acid dissolution, the proposed electrodissolution method is relatively fast (about 30 min), it is clean (there is no projection of solution) and simple (heating and fumes exhaust system were not necessaries).     

Ion exchange removal of calcium carbonate and gypsum from mineral material prior to determination of cation exchange capacity using89Sr++

Summary The aim of the present work was to show that ion exchange resins can be used to remove sparingly and slightly soluble salts from calcareous and gypseous soils, which may otherwise cause serious errors in the determination of cation exchange capacity. It was shown that CaCO₃ and CaSO₄-2H₂O can be removed from a mixture with montmorillonite(Ca++) by a mixed bed resin. After resin treatment of the mixture its C.E.C. as retained Sr⁺⁺ corresponds approximately to the C.E.C. for pure montmorillonite within certain limits. Use of an anion exchange resin alone for removing these salts, however, gave an Sr⁺⁺ retention well below the C.E.C. for the mineral. It was assumed that this results from the blocking of exchange sites by resin particles.

---

Zusammenfassung In kalkhaltigen und gipshaltigen B?den st?ren CaCO₃ und CaSO₄-2H₂O die Bestimmung des Kationenaustauschverm?gens. In der vorliegenden Arbeit wird gezeigt, da? Salze wie CaCO₃ und CaSO₄-2H₂O aus Mischungen mit Ca-Montmorillonit durch Ionenaustauscher herausgel?st werden k?nnen. Als Ionenaustauscher müssen jedoch Mischbettaustauscher verwendet werden; Anionenaustauscher allein liefern bei einer anschlie?enden Bestimmung des Kationenaustausches mit Sr⁺⁺ falsche Werte. Die angegebene Methode erscheint vor allem für die Untersuchung von B?den wichtig zu sein.

     

Electronic properties of aluminum clusters compared with the jellium model

The experimental polarizabilities, ionization potentials and electron affinities of aluminum clusters are compared with jellium predictions. It is found that the clusters have radii and work functions which are close to the jellium model predictions for clusters with more than 13 atoms. The polarizabilities of Al _n correspond with the jellium only forn>40 and the shell structure features in the ionization potentials are anomalous up to 37. We conclude that nonjellium effects are important up ton=40.     

Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric method for the simultaneous determination of cyclophosphamide, methotrexate and 5-fluorouracil as markers of surface contamination for occupational exposure monitoring

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric (HPLC/ESI-MS/MS) method was developed for the simultaneous quantification of 5-fluorouracil (5FU), methotrexate (MTX) and cyclophosphamide (CP) in environmental samples. These compounds, commonly used in the treatment of cancer, are recognized as genotoxic. In order to estimate the occupational exposure of hospital personnel handling these drugs, wipe samples were taken from the working surfaces and directly analyzed (with trophosphamide as internal standard) using a reversed-phase capillary column and MS/MS detection. This is the first HPLC/MS/MS method for the simultaneous determination of 5FU, MTX and CP. The present method offers high sensitivity, with detection limits of 1.1 microg l(-1) for MTX and CP and 33.3 microg l(-1) for 5FU, avoiding any sample preconcentration procedure. Rapidity, specificity, high accuracy (mean values between 92.4 and 99.9%) and precision (mean RSD values between 3.4 and 12.1%) make the method suitable for the routine determination of these three antineoplastic drugs.     

Macrocycle synthesis strategy based on step-wise “adding and reacting” three components enables screening of large combinatorial libraries

Macrocycles provide an attractive modality for drug development, but generating ligands for new targets is hampered by the limited availability of large macrocycle libraries. We have established a solution-phase macrocycle synthesis strategy in which three building blocks are coupled sequentially in efficient alkylation reactions that eliminate the need for product purification. We demonstrate the power of the approach by combinatorially reacting 15 bromoacetamide-activated tripeptides, 42 amines, and 6 bis-electrophile cyclization linkers to generate a 3780-compound library with minimal effort. Screening against thrombin yielded a potent and selective inhibitor (K_i = 4.2 ± 0.8 nM) that efficiently blocked blood coagulation in human plasma. Structure–activity relationship and X-ray crystallography analysis revealed that two of the three building blocks acted synergistically and underscored the importance of combinatorial screening in macrocycle development. The three-component library synthesis approach is general and offers a promising avenue to generate macrocycle ligands to other targets.

Combination of three efficient chemical reactions allows for solution-phase synthesis of 3780 macrocycles and identification of potent thrombin inhibitor.     

Thin chip microsprayer system coupled to quadrupole time-of-flight mass spectrometer for glycoconjugate analysis

A thin chip polymer-based microsprayer has been coupled to a hybrid quadrupole time-of-flight mass spectrometer (QTOF MS) and introduced in carbohydrate research. The feasibility of the approach is demonstrated for mapping, sequencing and structural elucidation of glycoconjugates originating from human body fluids and tissues such as a glycopeptide mixture from normal human urine and an isolated and purified GT1 ganglioside fraction from normal adult human brain. The optimization procedure required by each glycoconjugate category is described and the advantages of the system in terms of flexibility and adaptability to QTOF MS, stability of the ESI MS signal, carbohydrate ionization and sequencing, sensitivity, speed of analysis and sample consumption are discussed.