Synthesis of branched dithiotrisaccharides via ring-opening reaction of sugar thiiranes

Satisfactory procedures are described for the synthesis of 5,6- and 3,4-thiirane derivatives from the respective hexofuranose or hexopyranose epoxide precursors. The controlled ring-opening reaction of thiiranes by 1-thioaldoses was successfully accomplished to afford, regio- and stereoselectively, β-S-(1→4)-3,4-dithiodisaccharides. For instance, the regioselective attack of per-O-acetyl-1-thioglucose (16) to C-4 of 2-propyl 2,6-di-O-acetyl-3,4-epithio-α-D-galactopyranoside (14) gave the derivative of Glcp-β-S-(1→4)-3,4-dithioGlcp-O-iPr (17). This thiodisaccharide was accompanied by the (1→3)-disulfide 18, formed between 16 and 17, and the symmetric (3→3)-disulfide 19, which resulted from the oxidative dimerization of 17. However, the S-acetyl derivative of 17 could be obtained in good yield (62%) by LiAlH(4) reduction of the crude mixture 17-19, followed by acetylation. The same sequence of reactions starting from 14 and the 1-thiolate of Galp afforded the per-O,S-acetyl derivative of Galp-β-S-(1→4)-3,4-dithio-α-D-Glcp-O-iPr (23), which was selectively S-deacetylated to give 25. The dithiosaccharides 17 and 25 are 3,4-di-S-analogues of derivatives of the natural disaccharides cellobiose and lactose, respectively. The ring-opening reaction of 5,6-epithiohexofuranoses of D-galacto (8) or L-altro (11) configuration with 1-thioaldoses was also regio- and stereoselective to give the respective β-S-(1→6)-linked 5,6-dithiodisaccharides 26 or 29 in excellent yields. Glycosylation of the free thiol group of 17, 25, or 26, using trichloroacetimidates as glycosyl donors, led to the corresponding branched dithiotrisaccharides. Some of them are sulfur analogues of derivatives of branched trisaccharides found in natural polysaccharides.     

Practical synthesis of 1′-substituted Tubercidin C-nucleoside analogs

Several 1′-substituted analogs of Tubercidin C-nucleosides were prepared using a highly convergent synthesis. Good to high diastereoselectivity was achieved using a variety of nucleophiles targeting the 1′-position. The source for this stereoselectivity is herein proposed. It is thought to be attributed to a temperature-dependent chelation of the incoming nucleophile to either the 2′- or 3′-benzyloxy ether of the ribose core.     

Recent approaches in sensitive enantioseparations by CE

The latest strategies and instrumental improvements for enhancing the detection sensitivity in chiral analysis by CE are reviewed in this work. Following the previous reviews by García-Ruiz et al. (Electrophoresis 2006, 27, 195-212) and Sánchez-Hernández et al. (Electrophoresis 2008, 29, 237-251; Electrophoresis 2010, 31, 28-43), this review includes those papers that were published during the period from June 2009 to May 2011. These works describe the use of offline and online sample treatment techniques, online sample preconcentration techniques based on electrophoretic principles, and alternative detection systems to UV-Vis to increase the detection sensitivity. The application of the above-mentioned strategies, either alone or combined, to improve the sensitivity in the enantiomeric analysis of a broad range of samples, such as pharmaceutical, biological, food and environmental samples, enables to decrease the limits of detection up to 10?12 M. The use of microchips to achieve sensitive chiral separations is also discussed.     

Assessment of aptamer-steroid binding using stacking-enhanced capillary electrophoresis

The binding affinity of 17β-estradiol with an immobilized DNA aptamer was measured using capillary electrophoresis. Estradiol captured by the immobilized DNA was injected into the separation capillary using pH-mediated sample stacking. Stacked 17β-estradiol was then separated using micellar electrokinetic capillary chromatography and detected with UV-visible absorbance. Standard addition was used to quantify the concentration of estradiol bound to the aptamer. Following incubation with immobilized DNA, analysis of free and bound estradiol yielded a dissociation constant of 70 ± 10 μM. The method was also used to screen binding affinity of the aptamer for estrone and testosterone. This study demonstrates the effectiveness of capillary electrophoresis to assess the binding affinity of DNA aptamers.     

Anisotropic Ionic Mobility of Lithium Salts in Lamellar Liquid Crystalline Polymer Networks

New mesogens presenting smectic A (SmA) phases and capable of hosting lithium salts are designed. The mesogens comprise a vinyl‐functionalized spacer to allow further reaction to the polymer backbone, an aromatic core and ethylene oxide chains, able to coordinate lithium ions. Copolymerizing these monomers with a suitable crosslinker yields the first lithium containing liquid crystalline elastomers (LCEs). The SmA structure where the ethylene oxide chains are microphase separated in layers is fixed by the crosslinking and permanent macroscopic orientation is obtained. Diffusion and conductivity measurements of the monomer sample show a large anisotropy of the ion mobility (100 for the cation and 400 for the anion). In the elastomer the anisotropy of the lithium mobility is comparable to that in the monomers.     

Identification and structural characterization by LC‐ESI‐IONTRAP and LC‐ESI‐TOF of some metabolic conjugation products of homovanillic acid in urine of neuroblastoma patients

The levels of urinary catecholamine metabolites, such as homovanillic acid (HVA) and vanillylmandelic acid, are routinely used as a clinical tool in the diagnosis and follow‐up of neuroblastoma (NB) patients. Recently, in the Clinical Pathology Laboratory Unit of G. Gaslini Children Hospital, a commercial method that employs liquid chromatography coupled to electrochemical detection (LC‐EC) has been introduced for the measurement of these metabolites in the routine laboratory practice. Using this LC‐EC method, an unknown peak could be observed only in samples derived from NB patients. To investigate the nature of this peak, we used a combination of liquid chromatography‐time‐of‐flight mass spectrometry (LC‐TOF‐MS) and liquid chromatography‐ion trap tandem mass spectrometry (LC‐IT‐MS). The first approach was used to obtain the elemental composition of the ions present in this new signal. To get additional structural information useful for the elucidation of unknown compounds, the ion trap analyzer was exploited. We were able to identify not just one, but three unknown signals in urine samples from NB patients which corresponded to three conjugated products of HVA: HVA sulfate and two glucuronoconjugate isomers. The enzymatic hydrolysis with β‐glucuronidase confirmed the proposed structures, while the selective alkaline hydrolysis allowed us to distinguish the difference between phenol‐ and acyl‐glucuronide of HVA. The latter was the unknown peak observed in LC‐EC separations of urine samples from NB patients. Copyright © 2012 John Wiley & Sons, Ltd.     

High proton conductivity in a flexible, cross-linked, ultramicroporous magnesium tetraphosphonate hybrid framework

Multifunctional materials, especially those combining two or more properties of interest, are attracting immense attention due to their potential applications. MOFs, metal organic frameworks, can be regarded as multifunctional materials if they show another useful property in addition to the adsorption behavior. Here, we report a new multifunctional light hybrid, MgH(6)ODTMP·2H(2)O(DMF)(0.5) (1), which has been synthesized using the tetraphosphonic acid H(8)ODTMP, octamethylenediamine-N,N,N',N'-tetrakis(methylenephosphonic acid), by high-throughput methodology. Its crystal structure, solved by Patterson-function direct methods from synchrotron powder X-ray diffraction, was characterized by a 3D pillared open framework containing cross-linked 1D channels filled with water and DMF. Upon H(2)O and DMF removal and subsequent rehydration, MgH(6)ODTMP·2H(2)O (2) and MgH(6)ODTMP·6H(2)O (3) can be formed. These processes take place through crystalline-quasi-amorphous-crystalline transformations, during which the integrity of the framework is maintained. A water adsorption study, at constant temperature, showed that this magnesium tetraphosphonate hybrid reversibly equilibrates its lattice water content as a function of the water partial pressure. Combination of the structural study and gas adsorption characterization (N(2), CO(2), and CH(4)) indicates an ultramicroporous framework. High-pressure CO(2) adsorption data are also reported. Finally, impedance data indicates that 3 has high proton conductivity σ = 1.6 × 10(-3) S cm(-1) at T = 292 K at ~100% relative humidity with an activation energy of 0.31 eV.     

Molecular packing in highly stable glasses of vapor-deposited tris-naphthylbenzene isomers

Physical vapor deposition of organic molecules can produce glasses with high kinetic stability and low enthalpy. Previous experiments utilizing wide-angle x-ray scattering (WAXS) have shown that, relative to the ordinary glasses prepared by cooling the supercooled liquid, such glasses exhibit excess scattering characteristic of anisotropic packing. We have used vapor deposition to prepare glasses of four isomers of tris-naphthylbenzene (TNB), and measured both the WAXS patterns and the kinetic stability. While vapor-deposited glasses of all four TNB isomers exhibit high and nearly uniform kinetic stability, the level of excess scattering varies significantly. In addition, for α,α,β-TNB, glasses of essentially identical kinetic stability can have excess scattering levels that vary by a factor of two. These results indicate that anisotropic packing is not the source of kinetic stability in vapor-deposited glasses but rather a secondary feature that depends upon the chemical structure of the glass-forming molecules. We also show that the time required for these stable vapor-deposited glasses to transform into the supercooled liquid greatly exceeds the structural relaxation time τ(α) of the liquid and scales approximately as τ(α) (0.6). The kinetic stability of the vapor-deposited TNB glasses matches that expected for ordinary glasses that have been aged for 10(2) to 10(7) years.     

Frames for operators

Frames in Hilbert spaces are a redundant set of vectors which yield a representation for each vector in the space. In the present paper, we give a generalization of frames, which allows, in a stable way, to reconstruct elements from the range of a linear and bounded operator in a Hilbert space.